HEIMAN Smart Mini Carbon Monoxide Detector C1-W User Manual

1. Sarrera

Thank you for choosing the HEIMAN Smart Mini Carbon Monoxide Detector C1-W. This device is designed to provide precise detection of carbon monoxide (CO) concentrations, ensuring the safety of your home or travel environment. It features advanced electrochemical sensors, instant alarm notifications, and mobile app integration for remote monitoring. This manual provides detailed instructions for setup, operation, maintenance, and troubleshooting to help you get the most out of your device.

Irudia: Gainetikview of the HEIMAN C1-W Carbon Monoxide Detectors and their mobile app connectivity.

2. Segurtasun informazio garrantzitsua

Please read all instructions carefully before installation and operation. Failure to follow these instructions may result in improper operation of the detector and could lead to property damage, injury, or death.

• This device is designed to detect carbon monoxide gas. It is not designed to detect smoke, fire, or other gases.
• Do not paint the detector. Paint can clog the openings and prevent the sensor from detecting CO.
• Do not block the alarm's sound openings.
• Probatu alarma aldizka, eskuliburu honetan azaltzen den bezala.
• The sensor has a lifespan of up to 10 years. Replace the unit after 10 years from the manufacturing date.
• This product is certified with ETL, UL2034, and FCC standards.

3. Paketearen edukia

Egiaztatu osagai guztiak zure paketean daudela:

• HEIMAN Smart Mini Carbon Monoxide Detector (C1-W) units (5 Pack)
• CR123A Batteries (included, pre-installed or separate)
• Muntatzeko Torlojuak
• Hormako tapoiak
• Erabiltzailearen eskuliburua

Image: Included components of the HEIMAN C1-W Carbon Monoxide Detector.

4. Produktuaren zehaztapenak

Image: Dimensions of the HEIMAN C1-W Carbon Monoxide Detector.

5. Konfigurazioa eta instalazioa

5.1 Kokapena aukeratzea

Carbon monoxide is slightly lighter than air and mixes readily with air. For optimal detection, place the detector:

• In or near sleeping areas and living areas.
• On a wall, at least 5 feet (1.5 meters) from the floor, or on the ceiling.
• At least 15 feet (4.5 meters) away from fuel-burning appliances to avoid false alarms from normal combustion byproducts.
• Avoid placing in direct sunlight, near vents, fans, or in extremely dusty, dirty, or greasy areas.
• Suitable for use in residential environments such as bedrooms, kitchens, garages, and attics. Ideal for enclosed spaces like hotels, RVs, and tents when traveling.

Image: Versatile placement options for the HEIMAN C1-W detector.

5.2 Detektagailua muntatzea

1. Kendu muntatzeko euskarria: Press and insert a disassembly pin into the disassembly hole on the back of the alarm. Twist the alarm in the direction indicated on the cover to separate it from the mounting bracket.
2. Markatu zulatzeko zuloak: Hold the mounting bracket against the desired wall or ceiling location and mark the screw holes.
3. Zulatzeko zuloak: Drill holes at the marked positions using a 3/16" (5 mm) drill bit.
4. Txertatu hormako tapoiak: Sartu hormako tapoiak zulatutako zuloetan.
5. Parentesi segurua: Screw the mounting bracket to the wall or ceiling using the provided screws.
6. Detektagailua erantsi: Align the detector with the mounting bracket and turn clockwise to lock it securely in place.

Image: Step-by-step installation guide for the HEIMAN C1-W detector.

5.3 Bateriaren instalazioa

The detector uses one CR123A battery, which is included. Ensure the battery is correctly inserted according to the polarity markings inside the battery compartment. The device will activate once the battery is installed.

Image: Battery compartment and 10-year sensor lifespan indication.

5.4 App Pairing (Tuya/Smart Life APP)

To enable mobile app alerts and remote monitoring, you need to pair the detector with the Tuya or Smart Life app.

1. Deskargatu aplikazioa: Download and install the "Tuya Smart" or "Smart Life" app from your smartphone's app store (Google Play Store for Android, Apple App Store for iOS).
2. Erregistratu/Hasi saioa: Open the app and register a new account or log in to an existing one.
3. Gehitu gailua: Ensure your phone's Bluetooth is enabled. In the app, tap the "+" icon to add a new device.
4. Sartu parekatze moduan: On the CO detector, locate the RESET hole (usually on the underside). Use a small pin or paperclip to press and hold the RESET button until the LED light on the detector starts flashing rapidly. This indicates pairing mode.
5. Konektatu wifira: The app should automatically detect the device. Follow the on-screen prompts to connect the detector to your 2.4 GHz Wi-Fi network. Note: The detector only supports 2.4 GHz Wi-Fi.
6. Customize Name/Location: Once paired, you can customize the device name (e.g., "Living Room CO Detector") and assign it to a specific room within the app for easier identification of alerts.

Image: The HEIMAN C1-W detector connects via 2.4 GHz Wi-Fi for smart monitoring.

Image: Real-time push notifications from the HEIMAN C1-W detector via the mobile app.

6. Detektagailuaren funtzionamendua

6.1 Eragiketa normala

Once installed and powered on, the detector continuously monitors carbon monoxide levels in the air. The LED indicator will typically be off or flash periodically (e.g., every 30 seconds) to indicate normal operation, depending on the specific model's design. Refer to the small instruction leaflet included with the product for exact LED behavior.

6.2 Alarma probatzea

Alarma astero probatzea gomendatzen da behar bezala funtzionatzen duela ziurtatzeko.

1. Press Test/Hush Button: Locate the "PUSH TO TEST/HUSH" button on the cover of the unit.
2. Aktibatu alarma: Press and hold the button until the alarm sounds. The unit may continue to alarm for a few seconds after you release the button.
3. Verify App Notification: If paired with the app, you should receive a notification on your smartphone indicating a test alarm.
4. Troubleshoot if No Alarm: If the alarm does not sound, ensure the unit is receiving power (battery is installed correctly) and test it again. If it still fails, refer to the Troubleshooting section.

Image: How to test the CO alarm.

6.3 Alarm Conditions and Actions

In the event of a carbon monoxide detection:

• The alarm will sound an 85-decibel alarm.
• The LED light on the detector will flash.
• If paired, the mobile app will promptly notify you of the alarm, even if you are not at home.

Alarmak jotzen badu:

1. Atera berehala kanpoko aire freskora edo ireki ate eta leiho guztiak eremua aireztatzeko.
2. Ez sartu berriro lokalera alarma gelditu eta eremua ondo aireztatu arte.
3. Call your emergency services (e.g., 911 or local gas company) if you suspect a CO leak.
4. Identify and correct the source of carbon monoxide.

Image: Carbon Monoxide alarm precaution and mobile app notification.

7. Mantentzea

7.1 Cleaning the Detector

Clean the detector regularly to prevent dust and debris from interfering with its operation.

• Erabili biguna, damp zapi bat detektagailuaren kanpoaldea garbitzeko.
• Do not use cleaning solvents or chemicals.
• Ez margotu detektagailua.
• Do not spray air fresheners, hair spray, or other aerosols near the detector.

7.2 Bateria ordezkatzea

The detector features a low-battery warning function. When the battery is low, the device will emit a chirp or flash a specific LED pattern (refer to the small instruction leaflet for exact indication) and send a notification to your mobile app. Replace the battery promptly when this occurs.

1. Biratu detektagailua erlojuaren orratzen kontrako noranzkoan muntatzeko euskarritik kentzeko.
2. Ireki bateriaren konpartimendua.
3. Remove the old CR123A battery.
4. Insert a new CR123A battery, observing correct polarity.
5. Close the battery compartment and reattach the detector to the mounting bracket.
6. Probatu alarma bateria aldatu ondoren.

The battery is designed to last for approximately 3 years. The sensor itself has a lifespan of up to 10 years, after which the entire unit should be replaced.

8. Arazoak

9. Bermea eta Laguntza

HEIMAN provides a limited warranty for this product. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official HEIMAN webgunea.

For any product-related inquiries, technical support, or warranty claims, please feel free to contact us:

• Fabrikatzailea: HEIMAN
• Saltzailea: HEIMAN-US (on Amazon)
• Harremanetarako informazioa: Refer to the contact details provided in your product packaging or on the official HEIMAN webgunea.
• Lineako denda: Visit the HEIMAN Store on Amazon