1. Segurtasun informazioa
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be fatal or cause serious damage.
- OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu fusible edo etengailu elektrikotik instalazioa edo mantentze-lanak egin aurretik.
- This fixture is intended for installation in accordance with the National Electrical Code (NEC) and local code specifications. If you are not familiar with these codes, a qualified electrician should perform the installation.
- Ez instalatu gailu hau erraz sukoiak diren gainazaletan.
- Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
- Ez begiratu zuzenean LED argi iturrira.
2. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela.
- LED Flood Light Fixture (1)
- Muntatzeko Hardware Kit (1)
- Argibide eskuliburua (1)
3. Zehaztapenak
| Zehaztapena | Balioa |
|---|---|
| Modelo zenbakia | 17000207 |
| Energia iturria | Kableatua |
| Wattage | 32 Watt |
| Distira | 3200 lumen |
| Kolore Tenperatura | 4000 Kelvin (Eguneko Argia) |
| Mugimendua detektatzeko gunea | 240 degrees, up to 50 ft (15 m) |
| Materiala | Plastikoa |
| Barruko/Kanpoko erabilera | Kanpoan |
| Uraren Erresistentzia Maila | Urarekiko erresistentea |
| Neurriak (L x W x H) | 7" x 12" x 8.4" |
| Bermea | Urtebeteko fabrikatzailearen berme mugatua |
Image: Product dimensions for planning installation space.
4. Konfigurazioa eta instalazioa
This flood light is hardwired and requires connection to your home's electrical system. If you are not comfortable with electrical wiring, it is recommended to consult a qualified electrician.
4.1 Muntatzeko aukerak
The fixture offers dual mounting capabilities, allowing for installation on a wall or under an eave. The canopy can be rotated to accommodate the desired position.
Image: Wall mount and eave mount installation options.
4.2 Instalazio-urratsak
- Itzali energia: Hasi aurretik, ziurtatu instalazio-eremuko korrontea etengailu elektrikoan edo fusible-kutxan itzalita dagoela.
- Muntatzeko barra instalatu: Secure the mounting bar onto the junction box.
- Instalatu muntaketa plaka: Attach the mounting plate to the mounting bar.
- Hari-konexioak: Connect the fixture's wires to your home's electrical wires according to local codes (typically black to black, white to white, and ground to ground). Use wire nuts to secure connections.
- Erantsi tresna: Secure the flood light fixture to the mounting plate using the center bolt.
- Zigilua: Apply weather-resistant sealant around the mounting plate to prevent water intrusion.
- Berrezarri boterea: Once installation is complete and secure, restore power to the circuit.
Irudia: Instalazio gida pausoz pauso.
5. Funtzionamendu-argibideak
The Globe Electric 17000207 flood light features motion activation and adjustable settings for optimal performance.
5.1 Motion Activation
The integrated motion sensor detects movement within a 240-degree zone, up to 50 feet (15 meters) away. The light will activate when motion is detected within this range.
Image: Motion detection zone illustration.
5.2 MotionBright™ 2-Level Lighting
This feature provides constant low ambient lighting when no motion is detected, and automatically switches to full brightness when motion is sensed, enhancing security and saving energy.
Image: MotionBright feature demonstrating low and full brightness modes.
5.3 Ezarpenak doitzea
The motion sensor unit has adjustable dials to customize the light's behavior:
- Garaiz: Adjusts how long the light stays on after motion is detected (1, 5, or 20 minutes, or Test mode).
- Sens (Sensitivity): Controls the range and sensitivity of the motion sensor (Low, Med, High).
- Distira: Adjusts the overall brightness of the light (Low, High).
- MotionBright: Selects the operating mode (OFF, Dusk to Dawn, Hour).
Image: Control dials for adjusting light settings.
5.4 L doitzeaamp Buruak
Hiru LED l-akamp heads are independently adjustable, allowing you to direct the light precisely where needed for optimal coverage.
Image: Adjustable lamp heads for directing light.
6. Mantentzea
This LED flood light is designed for minimal maintenance.
- Garbiketa: Aparatua garbitzeko, ziurtatu korrontea itzalita dagoela. Garbitu zapi leun eta lehor batekin.amp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- LED: The integrated LED lights are not user-replaceable. Do not attempt to open the lamp buruak.
- Sentsore: Mugimendu-sentsorearen lentea garbi eta oztoporik gabe mantendu (adibidez, zikinkeria, armiarma-harriak...).webs) to ensure proper operation.
7. Arazoak
If you experience issues with your flood light, refer to the following common problems and solutions:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da pizten. | Argindarrik ez, kableatu akastuna, sentsorea blokeatuta, ezarpen okerrak. | Check circuit breaker. Verify wiring connections. Clear sensor lens. Adjust 'On Time' or 'Sens' settings. |
| Argia etengabe pizten da. | Continuous motion detected, 'On Time' set too long, 'MotionBright' setting. | Ensure no constant motion in detection zone. Adjust 'On Time' to a shorter duration. Check 'MotionBright' setting (e.g., if set to 'Dusk to Dawn'). |
| Mugimendua ez da fidagarritasunez detektatzen. | Sensor blocked, sensitivity too low, incorrect angle. | Clear sensor lens. Increase 'Sens' setting. Adjust sensor angle for optimal coverage. |
| Argi distira. | Loose wiring connection, power fluctuations. | Check all wiring connections for tightness. Consult an electrician if power fluctuations are suspected. |
8. Bermea eta Laguntza
This Globe Electric product is backed by a Urtebeteko fabrikatzailearen berme mugatua erosketa-datatik aurrera. Berme honek ohiko erabileran materialen eta eskulanen akatsak estaltzen ditu.
For warranty claims, technical assistance, or further inquiries, please contact Globe Electric customer support. Keep your proof of purchase for warranty validation.
Informazio gehiagorako, bisitatu Globe Electric Store on Amazon.
