Hover-1 My First Hoverboard Combo User Manual

1. Segurtasun informazioa

Your safety is paramount when operating the Hover-1 My First Hoverboard Combo. Please read and understand all instructions before use. Failure to follow these instructions can result in serious injury or property damage.

• Always Wear Safety Gear: Helmets, knee pads, and elbow pads are highly recommended and should be worn at all times during operation.
• Adin eta pisu murrizketak: This product is designed for children. Ensure the user meets the appropriate age and weight guidelines for safe operation.
• Gainbegiratzea: Young riders should always be supervised by an adult.
• Ibiltzeko ingurune segurua: Operate the hoverboard combo in safe, open areas away from traffic, pedestrians, and obstacles. Avoid riding on wet, uneven, or slippery surfaces.
• Bateriaren segurtasuna: The device features a 24V/2.0 Ah Lithium-ion rechargeable battery with a safety shield enclosure to prevent fire and overheating. Use only the provided charger. Do not attempt to modify or tamper bateriarekin.
• UL2272 Ziurtagiria: The Hover-1 My First Hoverboard Combo is UL2272 certified, ensuring it meets applicable safety standards for electrical and fire safety.
• Avoid Stunts: Do not attempt jumps, tricks, or aggressive maneuvers that could lead to loss of control or injury.

2. Produktua amaitu daview

The Hover-1 My First Hoverboard Combo transforms a standard hoverboard into an exciting buggy experience. This product is designed to provide a fun and intuitive riding experience for children, combining the self-balancing technology of a hoverboard with the stability and control of a kart.

Ezaugarri nagusiak:

• Dual 150W Motors: Provides a total of 300W power for smooth acceleration and handling.
• 6.3 hazbeteko pneumatikoak: Designed for a smooth and stable ride.
• Gehienezko abiadura: Gehienez 8 km/h (5 mph).
• Barruti maximoa: Approximately 3 miles (4.8 km) on a full charge.
• LED faroak: Enhances visibility and adds to the riding experience.
• Hover Buggy Attachment: Converts the hoverboard into a seated kart with hand-operated rear-wheel control and an adjustable frame.

Figure 2.1: The Hover-1 My First Hoverboard Combo, showcasing the hoverboard with the attached buggy frame and seat.

3. Muntaketa eta konfigurazioa

3.1 Osagaiak barne:

Muntatu aurretik, ziurtatu osagai guztiak daudela:

• Hover-1 My First Hoverboard Combo (Hoverboard and Buggy Attachment)
• Eskuliburua
• Hormako kargagailua

3.2 Hasierako kargatzea:

Before first use, fully charge the hoverboard. The 24V/2.0 Ah Lithium-ion battery typically requires 5 hours for a full charge. Use only the provided wall charger.

1. Locate the charging port on the hoverboard.
2. Connect the charger to the hoverboard's charging port.
3. Entxufatu kargagailua hormako entxufe estandar batera.
4. Kargagailuan dagoen adierazle-argia aldatuko da (adibidez, gorritik berdera) kargatzen amaitutakoan.
5. Disconnect the charger once fully charged. Do not overcharge.

3.3 Attaching the Buggy:

The buggy attachment features a quick-attach connection and an adjustable frame.

1. Ensure the hoverboard is powered off.
2. Position the buggy attachment over the hoverboard.
3. Align the quick-attach connectors on the buggy with the footpads of the hoverboard.
4. Securely fasten the attachment mechanisms. Refer to the diagrams in the printed manual for precise connection points.
5. Adjust the frame length to comfortably fit the rider's leg length. Ensure all locking mechanisms are engaged before riding.

4. Funtzionamendu-argibideak

4.1 Riding the Hoverboard (without Buggy):

The Hover-1 features a self-balancing system for intuitive control.

1. Power on the hoverboard.
2. Step onto one side of the hoverboard first. The board will stabilize.
3. Place your other foot onto the hoverboard. Maintain a relaxed posture and keep your balance.
4. Aurrera egiteko, aurrerantz makurtu pixka bat, eta moteltzeko edo atzera egiteko, atzerantz makurtu.
5. To turn, apply gentle pressure with your feet in the desired direction.
6. To dismount, step off one foot at a time, ensuring the hoverboard remains stable.

4.2 Operating the Hover Buggy Attachment:

The buggy attachment provides a seated riding experience with hand controls.

1. Ensure the buggy is securely attached to the hoverboard and the hoverboard is powered on.
2. Sit comfortably in the seat with your feet on the footrests.
3. Grasp the hand-operated rear-wheel control levers.
4. Push both levers forward to move forward.
5. Pull both levers back to slow down or reverse.
6. To turn, push one lever forward while pulling the other back, or apply differential pressure.
7. Beti mantendu kontrolpean eta izan zaitez kontziente zure inguruaz.

Figure 4.1: A child demonstrating the operation of the Hover-1 My First Hoverboard Combo with the buggy attachment.

5. Mantentzea

Regular maintenance ensures the longevity and safe operation of your Hover-1 My First Hoverboard Combo.

5.1 Garbiketa:

• Wipe down the hoverboard and buggy with a damp erabilera bakoitzaren ondoren oihala.
• Ez erabili produktu kimiko gogorrik edo garbigailu urratzailea.
• Avoid getting water into electronic components or charging ports.

5.2 Biltegiratzea:

• Gorde gailua leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturetatik babestuta.
• If storing for an extended period, ensure the battery is charged to approximately 50% and recharge it every 3 months to prevent battery degradation.

5.3 Bateriaren zaintza:

• Only use the original charger provided with the product.
• Do not operate the hoverboard if the battery is visibly damaged or leaking.
• Bota bateriak tokiko araudiaren arabera.

6. Arazoak

If you encounter issues with your Hover-1 My First Hoverboard Combo, refer to the following common problems and solutions:

If you experience a problem not listed here, or if the suggested solutions do not resolve the issue, please contact Hover-1 Customer Support for assistance.

7. Zehaztapenak

8. Bermea eta laguntza

8.1 Bermearen informazioa:

The Hover-1 My First Hoverboard Combo comes with a 90 eguneko bermea from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or failure to follow the instructions in this manual.

8.2 Bezeroarentzako laguntza:

For warranty claims, technical assistance, or any questions regarding your Hover-1 My First Hoverboard Combo, please contact Hover-1 Customer Support. Refer to the contact information provided on the Hover-1 official website or the packaging for the most current support details.

When contacting support, please have your model number (H1-MFH-CMB-3) and proof of purchase readily available.