Sarrera
Thank you for choosing the HOFTRONIC Q-Series 120cm LED Batten. This robust and waterproof LED fixture is designed for easy installation and provides efficient, high-quality illumination. It is suitable for a wide range of environments, including basements, garages, workshops, and warehouses. This manual provides essential information for safe installation, operation, and maintenance of your new LED batten.
The Q-Series LED batten features an integrated light source, eliminating the need for separate LED tubes. Its energy-efficient design consumes only 36 watts while delivering 4320 lumens, offering significant energy savings compared to traditional fluorescent fixtures.
Segurtasun-argibideak
- Segurtasun elektrikoa: Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- liburukiatage: This fixture operates on 230 Volts. Verify your power supply matches this requirement.
- Manipulazioa: Handle the fixture with care to avoid damage. Do not drop or subject it to excessive force.
- Ingurumena: The fixture is rated IP65 for water and dust resistance and IK08 for impact protection, making it suitable for both indoor and outdoor use in demanding environments. However, avoid direct exposure to corrosive chemicals unless specifically designed for such conditions.
- Tenperatura: Operate the fixture within the specified temperature range of -20°C to +40°C.
- Aldaketak: Do not attempt to modify or disassemble the fixture. This will void the warranty and may pose a safety risk.
Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- HOFTRONIC Q-Series 120cm LED Batten (with integrated LED light source)
- Mounting clips (stainless steel)
- Screws and wall plugs for mounting
- Quick connection clips
Zehaztapenak
| Zehaztapena | Balioa |
|---|---|
| Marka | HOFTRONIC |
| Modelo zenbakia | 2711559 |
| Neurriak (L x W x H) | 120 x 5.7 x 4.7 cm |
| Pisua | 5 kilogramo |
| Materiala | Polikarbonatoa (PC) |
| Energia-kontsumoa | 36 Watt |
| Argi Fluxua | 4320 lumen |
| Kolore Tenperatura | 6500 Kelvin (Zuri Hotza) |
| liburukiatage | 230 Volt |
| IP balorazioa | IP65 (iragazgaitza eta hautsaren aurkakoa) |
| IK Balorazioa | IK08 (Impact Protection) |
| Batez besteko Bizi-iraupena | 25,000 hours (approx. 10 years with average use) |
| Ezaugarri bereziak | Plug and Play, Quick Mounting, Linkable (up to 20 units), Flicker-free |
For detailed energy efficiency information, please refer to the EPREL database:
EPREL Produktuaren Informazioa
Image: Energy efficiency label showing the product's energy class and consumption.
Konfigurazioa eta Instalazioa
Hasi aurretik: Ensure the main power supply is switched off at the circuit breaker.
1. Elementua muntatzea
- Determine the desired mounting location on the ceiling or wall.
- Mark the positions for the mounting clips. Use the fixture itself or measure the distance between the clip attachment points.
- Egin zuloak markatutako posizioetan eta sartu hormako takoak.
- Secure the stainless steel mounting clips to the surface using the provided screws.
- Align the LED batten with the mounted clips and press firmly until it clicks into place.
Image: Illustration of the mounting process, showing drilling, securing clips, and attaching the fixture.
2. Konexio elektrikoa
The HOFTRONIC Q-Series LED Batten features a quick connect system for easy wiring.
- Open the quick connect terminal cover at one end of the fixture.
- Connect the live (L), neutral (N), and ground (PE) wires from your power supply to the corresponding terminals. Ensure a secure connection.
- Close the terminal cover securely.
Irudia: Xehetasun handikoa view of the quick connect mechanism for electrical wiring.
3. Linking Multiple Fixtures (Optional)
Up to 20 Q-Series battens can be linked together using the integrated quick connectors and a suitable connecting cable (min. 5mm / max. 9mm diameter, PG11 cable gland compatible).
- After mounting the first fixture and connecting it to the power supply, prepare the connecting cable.
- Insert one end of the connecting cable into the quick connect port of the first fixture.
- Mount the next fixture and insert the other end of the connecting cable into its quick connect port.
- Repeat for additional fixtures, ensuring all connections are secure.
Image: Illustration demonstrating the linking capability of multiple HOFTRONIC Q-Series fixtures.
Once all fixtures are mounted and wired, restore power to the circuit.
Funtzionamendu-argibideak
The HOFTRONIC Q-Series LED Batten operates immediately upon receiving power. There are no complex controls or settings. Simply switch on the power supply to illuminate the fixture, and switch it off to turn it off.
The fixture provides a diffuse light output, which helps to reduce glare and create a more comfortable lighting environment.
Image: Visual comparison illustrating the diffuse light provided by the HOFTRONIC Q-Series LED Batten.
Mantentzea
The HOFTRONIC Q-Series LED Batten requires minimal maintenance due to its durable construction and integrated LED technology.
- Garbiketa: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
- Ikuskapena: Periodically inspect the fixture for any signs of damage, loose connections, or excessive dirt accumulation. Address any issues promptly.
- Erabiltzaileak ez du zerbitzurik gabeko piezarik: LED argi-iturria integratuta dago eta ezin du erabiltzaileak ordezkatu. Ez saiatu argi-tresna irekitzen.
Arazoak konpontzea
If you encounter issues with your HOFTRONIC Q-Series LED Batten, refer to the following common troubleshooting steps:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Aparailua ez da pizten | Ez dago elikadura hornidurarik Kableatu konexio soltea Instalazio akastuna | Egiaztatu zirkuitu-hauslea eta hormako etengailua. Ensure all electrical connections are secure (power off first). Beste irtenbideek huts egiten badute, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. |
| Argi distiratsua | Elikatze-hornidura ezegonkorra Kableatu konexio soltea | Egiaztatu energia iturriaren egonkortasuna. Verify all wiring connections are tight (power off first). |
| Distira murriztua | Zikinkeria edo hautsa pilatzea | Clean the fixture's surface (power off first). |
If the problem persists after attempting these solutions, please contact HOFTRONIC customer support.
Bermea eta Laguntza
HOFTRONIC provides a 2 urteko bermea for this Q-Series LED Batten, covering defects in materials and workmanship under normal use. This warranty period begins from the date of purchase.
The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or natural disasters.
For warranty claims, technical support, or any questions regarding your product, please contact HOFTRONIC customer service through your retailer or the official HOFTRONIC website. Please have your proof of purchase and model number (2711559) ready when contacting support.
Produktuen Aplikazioak
The HOFTRONIC Q-Series LED Batten is versatile and suitable for a variety of applications, thanks to its robust and waterproof design:
- Industria: Warehouses, factories, production halls.
- Komertziala: Supermarkets, retail spaces, workshops, car repair shops.
- Egoitza: Garages, basements, utility rooms.
- Espezializatua: Cold storage rooms, car washes, outdoor covered areas.
Irudia: Adibamples of the LED batten installed in industrial environments such as car washes, large warehouses, and cold storage facilities.
Irudia: Adibamples of the LED batten installed in commercial and residential settings, including supermarkets, workshops, and garages.
Produktuaren neurriak
Refer to the diagram below for detailed dimensions of the HOFTRONIC Q-Series LED Batten.
Image: Technical drawing illustrating the length (1200mm) and other key dimensions of the LED batten.
