Godox X3 S Nano Touchscreen TTL Wireless Flash Trigger for Sony User Manual

1. Sarrera

The Godox X3 S Nano Touchscreen TTL Wireless Flash Trigger is designed for Sony camera systems, providing wireless control over compatible flashes within the Godox X wireless radio system. This compact and lightweight trigger features an intuitive touchscreen interface for easy adjustment of flash settings.

It operates on a 2.4 GHz frequency, offering a wireless range of up to 328 feet (100 meters). Key functionalities include support for Sony's ADI / P-TTL system, high-speed sync up to 1/8000 second, and control over flash exposure compensation, modeling light, and zoom settings. The device is powered by an internal rechargeable battery and includes a USB-C port for charging and firmware updates.

2. Zer dago kutxan

Verify that all components are present upon unpacking your Godox X3 S Nano Flash Trigger:

• Godox X3 S Touchscreen TTL Wireless Flash Trigger for Sony
• USB-C kargatzeko kablea
• Eraman poltsa

Image: Included components: Godox X3 S trigger, USB-C cable, and carry bag.

3. Produktua amaitu daview

The Godox X3 S Nano features a compact design with a touchscreen interface and physical buttons for essential controls.

Irudia: Aurrealdea view of the X3 S Nano, highlighting the touchscreen and control buttons.

Funtsezko osagaiak:

• Ukipen-pantailako pantaila: Primary interface for adjusting settings.
• Zapata beroaren euskarria: For attaching to a camera.
• USB-C ataka: Kargatzeko eta firmware eguneratzeko.
• M/Q Button: Mode/Quick access button.
• Flash botoia: Test flash button.
• Markaketa kontrolatua: Menuetan nabigatzeko eta balioak doitzeko.

Irudia: Albokoa view showing the control buttons and dial.

4. Konfigurazioa

4.1 Bateria kargatzea

The X3 S Nano has an internal rechargeable lithium-ion battery. Before first use, fully charge the device.

1. Connect the supplied USB-C cable to the USB-C port on the trigger.
2. Konektatu USB-C kablearen beste muturra USB elikatze-egokitzaile batera (ez dago barne) edo ordenagailuaren USB ataka batera.
3. The charging indicator on the screen will show the charging status. The device is fully charged when the indicator shows full.

4.2 Kamerara muntatzea

Attach the X3 S Nano to your Sony camera's hot shoe.

1. Slide the hot shoe foot of the X3 S Nano into the camera's hot shoe.
2. Secure the trigger by tightening the locking mechanism (if present) on the hot shoe mount.

4.3 Piztu/Itzaltzea

Press and hold the power button (usually integrated with the control dial) for a few seconds to power on or off the device.

5. Funtzionamendu-argibideak

5.1 Basic Interface Navigation

The X3 S Nano features a touchscreen for intuitive control. Tap on icons or values to select them, and use the control dial or on-screen +/- buttons to adjust settings.

5.2 Pairing with Flashes

To wirelessly control Godox X system flashes, ensure both the trigger and the flash units are set to the same channel and ID.

1. On the X3 S Nano, access the channel settings via the touchscreen. Select a channel (1-32).
2. Set a wireless ID (01-99 or OFF) if desired for interference prevention.
3. On your compatible Godox flash unit, set the same channel and ID.
4. The trigger should now be able to communicate with the flash. Perform a test flash using the flash button on the trigger.

5.3 Adjusting Flash Settings

The touchscreen allows for quick adjustments:

• Flash modua: Tap to switch between TTL, Manual (M), and Multi (Stroboscopic) modes.
• Taldearen kontrola: Select individual flash groups (A, B, C, etc.) to adjust their power levels or modes independently.
• Potentzia irteera: In Manual mode, tap the power value and use the dial or +/- buttons to adjust from 1/1 to 1/256.
• Flasharen Esposizioaren Konpentsazioa (FEC): In TTL mode, adjust FEC from -3 to +3 EV.
• Abiadura Handiko sinkronizazioa (HSS): The trigger supports HSS up to 1/8000 second when used with compatible cameras and flashes. This is typically enabled automatically or through camera settings.
• Modelatzeko argia: Control the modeling light on compatible flash units.
• Zooma: Adjust the flash head zoom for compatible units.

5.4 Firmware eguneraketak

Aldian-aldian egiaztatu Godox ofiziala website for firmware updates. Connect the X3 S Nano to a computer via the USB-C cable and follow the instructions provided by Godox for the update process.

6. Mantentzea

6.1 Garbiketa

• Use a soft, dry cloth to clean the exterior of the trigger.
• For the touchscreen, use a microfiber cloth specifically designed for electronics. Avoid abrasive materials or harsh chemicals.
• Keep the hot shoe contacts clean and free of dust or debris.

6.2 Biltegiratzea

When not in use, store the X3 S Nano in its provided carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Arazoak

8. Zehaztapenak

Irudia: Behealdea view displaying product information and regulatory details.

9. Bermea eta Laguntza

Bermeari buruzko informazioa eta laguntza teknikoa lortzeko, jo ezazu Godox ofizialera. webwebgunera edo jarri harremanetan zure tokiko banatzailearekin. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.

Godox Ofiziala Webgunea: www.godox.com