Montech Sky Two GX E-ATX Mid Tower Case User Manual

Produktua amaituview

The Montech Sky Two GX is a high-performance E-ATX mid-tower case designed for optimal airflow and hardware compatibility. It features a metal mesh front panel, tempered glass side panel, and comes with three pre-installed 140mm PWM ARGB fans.

• Metal mesh front panel with up to 51% porosity ensures optimal airflow and dustproof protection, while the unique bottom mesh structure extends cooling throughout the case.
• Sky Two GX boasts a 10mm taller on top for better radiator support and a 5mm wider cable management space, now at 25mm compared to Sky Two.
• Equipped with three AX140 ARGB PWM fans and support for up to 11 fans, this system delivers efficient cooling for high-end hardware, complemented by 24 integrated LEDs.
• The swivel side panel improves accessibility and simplifies maintenance tasks.
• Multifunctional side panel supports SSI-EEB motherboards and 2x 2.5-inch SSDs, with quick detachment for fan installation, offering versatility and convenience for system configurations.

Konfigurazioa eta Instalazioa

Follow these steps for proper setup and installation of your PC components within the Montech Sky Two GX case.

1. Kutxa irekitzea eta prestatzea

Carefully remove the case from its packaging. Inspect for any damage during transit. Place the case on a stable, flat surface. Remove the tempered glass side panel by gently swinging it open (it's hinged) and lifting it off the hinges if necessary for easier access.

2. Plaka amaren instalazioa

The Sky Two GX supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards. Install the necessary standoffs for your motherboard size. Carefully place your motherboard into the case, aligning it with the standoffs, and secure it with screws.

3. Elikatze-iturriaren (PSU) instalazioa

Install your PSU into the dedicated PSU shroud area at the bottom of the case. Ensure proper orientation for airflow. The case supports PSUs up to 210mm in length.

4. Biltegiratze unitatearen instalazioa

The case provides mounting points for 2.5-inch SSDs and 3.5-inch HDDs. Utilize the drive cages and mounting brackets as needed. The multifunctional side panel supports 2x 2.5-inch SSDs.

5. Grafiko Txartelaren (GPU) eta Hedapen Txartelaren Instalazioa

Install your graphics card and other PCIe expansion cards into the motherboard's slots. The case supports GPUs up to 400mm in length.

6. Cooling System Installation (Fans & Radiators)

The Sky Two GX comes with three pre-installed 140mm ARGB PWM fans at the front. Additional fans and radiators can be installed at the top, rear, and bottom. The case supports up to 11 fans and radiators up to 360mm at the top and front.

7. Kableen kudeaketa

Erabili ample cable management space (25mm) behind the motherboard tray and the included cable ties to route and secure cables. This improves airflow and aesthetics.

8. Front Panel I/O Connections

Connect the front panel I/O cables (USB 3.0, USB Type-C, audio, power, reset, LED) to the corresponding headers on your motherboard. The case features an all-in-one F-Panel connector for simplified connection.

Konfigurazioa amaitu daview Bideoa

Watch this official video for a visual guide on the features and setup of the Montech Sky Two GX case.

Funtzionamendu-argibideak

Once your system is assembled, operating the Montech Sky Two GX is straightforward. The case provides easy access to essential functions.

Powering On/Off and Reset

Use the power button located on the top I/O panel to turn your system on or off. A reset button is also available for system restarts. Ensure all internal connections are secure before powering on.

ARGB haizagailuaren kontrola

The pre-installed AX140 ARGB PWM fans are designed for efficient cooling and customizable lighting. Connect the fan's ARGB cables to your motherboard's 3-pin 5V ARGB header and the PWM cables to your motherboard's fan headers. Control fan speed and RGB lighting effects through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, GIGABYTE RGB Fusion, ASRock Polychrome Sync).

USB and Audio Ports

Utilize the top-mounted USB 3.0, USB Type-C, and audio jacks for convenient peripheral connectivity. Ensure the internal headers are correctly connected to your motherboard for full functionality.

Mantentzea

Regular maintenance helps ensure optimal performance and longevity of your Montech Sky Two GX case and the components within.

Cleaning Dust Filters and Mesh Panels

The case features a metal mesh front panel and other filtered areas to prevent dust ingress. Periodically clean these filters to maintain optimal airflow. The front mesh panel has a convenient quick-release mechanism for effortless maintenance.

Barne osagaietara sartzea

The swivel tempered glass side panel allows for easy access to internal components for upgrades or cleaning. Simply swing the panel open. For full removal, lift the panel off its hinges when open.

Arazoak konpontzea

This section addresses common issues you might encounter. For more complex problems, refer to your individual component manuals or contact Montech support.

System Not Powering On

• Ziurtatu PSU etengailua 'ON' posizioan dagoela.
• Verify all power cables (24-pin ATX, CPU, GPU) are securely connected to the motherboard and components.
• Check that the front panel power button cable is correctly connected to the motherboard's F-Panel header.

Fans Not Spinning or RGB Not Working

• Confirm that the fan PWM cables are connected to appropriate fan headers on the motherboard.
• Ensure the ARGB cables are connected to a 3-pin 5V ARGB header on your motherboard, not a 4-pin 12V RGB header. Incorrect connection can damage LEDs.
• Check your motherboard's BIOS/UEFI settings and RGB software to ensure fans and lighting are enabled and configured correctly.

Aire-fluxu eskasa edo tenperatura altuak

• Clean all dust filters and mesh panels regularly.
• Verify that fans are oriented correctly for optimal airflow (intake at front/bottom, exhaust at rear/top).
• Ziurtatu kableek ez dutela kaxa barruko aire-fluxuaren bideak oztopatzen.

Zehaztapenak

Bermea eta Laguntza

Montech products are manufactured to high quality standards and are covered by a limited warranty. Please refer to the warranty information provided with your purchase or visit the official Montech webtermino eta baldintza zehatzetarako webgunea.

For technical support, troubleshooting assistance, or warranty claims, please contact Montech customer service through their official website or the contact information provided in your product packaging. When contacting support, please have your product model number (SKYTWOGXW) and proof of purchase ready.

Official Montech Webgunea: www.montechpc.com