GAME 7011-E hareazko iragazketa sistemaren argibideen eskuliburua

Sarrera

This manual provides essential information for the safe and efficient operation, installation, and maintenance of your GAME 7011-E Sand Filtration System. This system is designed for above-ground pools up to 25,000 gallons, featuring a 16-inch filter tank, a 3/4 HP pump, and a digital timer for automated filtration cycles. Please read all instructions carefully before assembly and use.

Segurtasun Informazioa

OHARRA: Argibide hauek ez jarraitzeak lesio larriak edo heriotza eragin ditzake.

• Deskonektatu beti ponparen energia edozein zerbitzu edo mantentze-lan egin aurretik.
• Ensure the electrical supply is protected by a Ground Fault Circuit Interrupter (GFCI).
• Ez erabili ponpa kablea edo entxufea hondatuta badago.
• Keep children away from the filtration system during operation.
• The system must be installed on a solid, level surface.
• Ez lurperatu korronte-kablea.
• Consult a qualified electrician for electrical connections if unsure.

Paketearen edukia

Egiaztatu behean zerrendatutako osagai guztiak daudela eta kalterik gabe muntatzen hasi aurretik.

Image: A visual representation of all components included in the package, such as the six-way valve, sand filter tank, pump, hoses, and hardware.

• Six-Way Valve
• 16-inch Sand Filter Tank
• 16-inch Sand Filter Tank Base
• 16-inch Manifold Tube
• Manifold Lateral Assembly
• Brida Clamp
• 0.75 HP Pump & Motor Assembly & Base
• Hareazko Ezkutua
• Fasteners, Hardware & Gaskets
• Presio-neurgailua
• Sand Filter Tank Drain Plug
• 20", 40" & 120" Hoses
• Iragazki saskia
• Strainer Basket Lid
• Motor Drain Plug
• Bista

Muntaia eta Instalazioa

Follow these steps for proper assembly and installation of your sand filtration system.

Image: The complete GAME 7011-E Sand Filtration System, including the sand filter tank, pump, and multi-port valve.

1. Sistema kokatzea: Place the filter system on a firm, level surface, preferably concrete, at least 2 feet from the pool. Ensure the location allows for proper drainage when backwashing.
2. Assembling the Tank Base: Secure the sand filter tank onto its base.
3. Installing Lateral Assembly: Insert the manifold lateral assembly into the bottom of the filter tank. Ensure laterals are spread evenly.
4. Iragazki-harea gehitzea: Carefully pour approximately 120 pounds of #20 silica sand (0.45-0.55mm) into the filter tank. Ensure the manifold tube remains centered during this process. Fill the tank about two-thirds full.
5. Attaching the Six-Way Valve: Place the six-way valve onto the top of the filter tank, aligning the ports. Secure it with the flange clamp, ensuring a tight seal. Use a #3 Phillips screwdriver for the clamp screws and ensure washers are used to prevent damage to the plastic flange. Align the clamp openings with the ridges on the valve.
6. Ponpa konektatzea: Attach the pump to the six-way valve using the provided hoses and fittings. Ensure all connections are tight to prevent leaks. The system uses 1.5-inch inlet and outlet connections.
7. Connecting to Pool: Connect the pool's skimmer line to the pump's inlet and the pool's return line to the six-way valve's 'RETURN' port using the provided hoses.
8. Installing Pressure Gauge: Screw the pressure gauge into the designated port on the six-way valve.
9. Filling the Pump with Water: Before starting, remove the strainer basket lid and fill the pump with water to prime it. Replace the lid securely.
10. Konexio elektrikoa: Plug the 7.9-meter power cord into a GFCI-protected outlet.

Image: The compact sand filtration system positioned beside an above-ground pool, demonstrating its suitable size for various setups.

Funtzionamendua

The GAME 7011-E Sand Filtration System features a 6-way valve and a digital timer for controlling filtration cycles.

Irudia: Gehiagoview highlighting the pressure gauge for monitoring system performance, the 6-way valve for controlling water flow, and the strainer basket for pre-filtering debris.

6-Way Valve Functions

Always turn off the pump before changing the valve position to prevent damage.

• Iragazkia: Normal filtering mode. Water flows through the sand, trapping debris, and returns to the pool.
• Atzera-garbiketa: Cleans the filter sand by reversing water flow, sending dirty water to waste. Use when pressure gauge reads 8-10 PSI above starting pressure.
• GARBITU: Used after backwashing to flush out any remaining dirty water from the valve and sand bed to waste before returning to FILTER mode.
• HONDAKINAK/HUSTUKETA: Bypasses the filter, sending water directly to waste. Useful for lowering pool water level or vacuuming heavy debris directly to waste.
• BIRKIRKULATU: Bypasses the filter, circulating water directly back to the pool. Useful for mixing chemicals without filtering.
• ITXITA: Shuts off all flow to the filter and pump. Use for servicing the pump or filter.

Tenporizadore digitalaren funtzionamendua

Image: Close-up of the integrated digital timer, allowing for programmable filtration cycles.

The digital timer allows for automated control of filtration cycles. Refer to the timer's specific instructions for setting daily run times. Ensure the timer is set to provide adequate filtration for your pool size and usage, typically 8-12 hours per day.

Mantentzea

Regular maintenance ensures optimal performance and longevity of your filtration system.

• Atzerako garbiketa: Perform backwashing when the pressure gauge reads 8-10 PSI above its clean starting pressure, or when water flow to the pool decreases significantly.
• Garbiketa: Always rinse for 30-60 seconds after backwashing to settle the sand and prevent dirty water from returning to the pool.
• Iragazki-saskiaren garbiketa: Regularly inspect and clean the pump's strainer basket. Turn off the pump, close necessary valves, remove the lid, empty debris, and replace.
• Harea ordezkatzea: Filter sand typically needs to be replaced every 3-5 years, depending on usage and water chemistry.
• Neguan egitea: In cold climates, drain all water from the pump and filter tank to prevent freezing damage. Store the pump and valve indoors if possible.

Arazoak konpontzea

This section addresses common issues you might encounter with your sand filtration system.

Zehaztapenak

Bermea eta Laguntza

The GAME 7011-E Sand Filtration System comes with a 2 urteko fabrikatzailearen bermea. For warranty claims, technical assistance, or replacement parts, please contact GAME customer support. Refer to the product packaging or the official GAME webuneko harremanetarako informazioa lortzeko gunea.

Image: The sand filtration system integrated with a GAME SCG (Saltwater Chlorinator Generator) system, illustrating compatibility.