Sarrera
This manual provides comprehensive instructions for the safe and effective operation of the MASTECH MS6252D Digital Anemometer. Please read this manual thoroughly before using the device and retain it for future reference.
The MS6252D is a versatile digital anemometer designed for measuring wind speed, air volume, ambient temperature, and humidity. It features a wireless interface for convenient data transfer and a clear display with backlight for easy readability.
Produktua amaituview
1. irudia: Aurrealdea view of the MS6252D Digital Anemometer, showing the impeller, LCD display, and control buttons.
2. irudia: Atzealdea view of the MS6252D Digital Anemometer, showing the battery compartment cover.
3. irudia: Atzealdea view of the MS6252D Digital Anemometer with the battery compartment open, revealing the battery slot.
Ezaugarri nagusiak:
- Display 9999 counts for precise readings.
- Automatic Power Off function to conserve battery life.
- Adjustable Flow Area Setting for accurate air volume calculations.
- MAX / MIN measurement modes to capture extreme values.
- Data Hold function to freeze current readings on the display.
- Display Backlight for improved visibility in low-light conditions.
- Low Battery Display indicator.
- Selectable temperature units (℃/℉).
- Measurement of Ambient temperature, Dew Point, and Wet Bulb temperature.
- Wireless Interface for data connectivity.
Konfigurazioa
Bateriaren instalazioa:
- Kokatu bateriaren konpartimendua gailuaren atzealdean.
- Use a small screwdriver to open the battery compartment cover.
- Sartu 2 LR44 pila, polaritate zuzena (+/-) ziurtatuz.
- Jarri bateriaren konpartimenduaren estalkia eta lotu torlojuarekin.
Hasierako piztea:
Sakatu BOTEREA button to turn on the device. The display backlight will illuminate, and the device will perform a self-test before entering measurement mode.
Funtzionamendu-argibideak
Measuring Wind Speed:
Hold the anemometer so that the impeller faces directly into the airflow. The wind speed will be displayed on the LCD. Use the UNITATEA button to cycle through different units (m/s, km/h, ft/s, Knots, mile/h, ft/m).
Measuring Air Volume:
To measure air volume (CFM, CMM, CMS), you must first set the flow area. Refer to the 'Flow Area Setting' section for detailed instructions. Once the area is set, the device will calculate and display the air volume based on the measured wind speed.
Temperature and Humidity Measurement:
The device automatically measures ambient temperature and humidity. Press the FUNC button to cycle through Ambient Temperature, Dew Point, and Wet Bulb temperature displays. Use the ℃/℉ botoia Celsius eta Fahrenheit artean aldatzeko.
MAX/MIN and Data Hold:
- Sakatu MAX/MIN once to display the maximum recorded value. Press again for the minimum value. Press a third time to exit MAX/MIN mode.
- Sakatu EUTSI to freeze the current reading on the display. Press EUTSI again to release and resume live measurements.
Pantailaren atzeko argia:
Sakatu ARGIA button to turn the display backlight on or off. The backlight will automatically turn off after a period of inactivity to save power.
Mantentzea
Garbiketa:
Garbitu gailua leun batekin, damp cloth. Do not use abrasive cleaners or solvents. Ensure the impeller is free from dust and debris for accurate readings.
Bateria ordezkatzea:
When the low battery indicator appears on the display, replace the batteries as described in the 'Battery Installation' section. Dispose of old batteries responsibly.
Biltegiratzea:
If the device will not be used for an extended period, remove the batteries to prevent leakage. Store the anemometer in a cool, dry place, away from direct sunlight and extreme temperatures.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Gailua ez da pizten. | Bateriak hilda edo gaizki instalatuta. | Egiaztatu bateriaren polaritatea edo ordezkatu bateriak. |
| Irakurketa okerrak. | Impeller obstructed or dirty; incorrect flow area setting. | Clean the impeller; verify and adjust flow area setting. |
| Pantaila ilun edo hutsik dago. | Bateria gutxi; atzeko argia itzalita. | Replace batteries; press the LIGHT button to activate backlight. |
| Haririk gabeko konexio arazoak. | Out of range; interference; software issue. | Move closer to the receiver; check for sources of interference; restart device and software. |
Zehaztapenak
4 Irudia: Gainetikview of MS6252D features, specifications, and included accessories.
Figure 5: Detailed technical specifications including measurement ranges, resolutions, and accuracies.
| Parametroa | Balioa |
|---|---|
| Modelo zenbakia | GL-MS6252D |
| Bistaratu zenbaketak | 9999 |
| Energia iturria | 2 x LR44 bateria (barne) |
| Produktuaren neurriak (L x W x H) | 6.3 x 3.54 x 1.97 hazbete |
| Elementuaren pisua | 0.5 kilogramo (1.1 libera) |
| Materiala | Akrilonitrilo Butadieno Estirenoa (ABS) |
| Tenperatura tartea | -10 ℃ eta 60 ℃ (14 ℉ eta 140 ℉) |
| Haizearen abiadura-tartea (m/s) | 0.80 ~ 30.00 m/s |
| Haizearen abiadura-tartea (km/h) | 2.88 ~ 108.0 km/h |
| Wind Speed Range (ft/s) | 2.62 ~ 98.50 oin/s |
| Wind Speed Range (Knots) | 1.6 ~ 58.30 korapilo |
| Wind Speed Range (mile/h) | 1.8 ~ 90.00 mile/h |
| Wind Speed Range (ft/m) | 157.5 ~ 5900 oin/m |
| Hezetasun erlatiboa | 20-80% RH |
| Interfazea | Haririk gabekoa |
Bermea eta Laguntza
MASTECH/MGL provides a 1-year EU Spare Part Availability Duration for this product. For technical support, warranty claims, or service inquiries, please contact your local distributor or visit the official MASTECH webgunea.
Gorde erosketa-agiria erosketaren frogagiri gisa, bermearen ondorioetarako.