Graco Ultra 695 XT Standard Series Electric Airless Sprayer User Manual

1. Sarrera

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Graco Ultra 695 XT Standard Series Electric Airless Sprayer. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

The Graco Ultra 695 XT is designed for professional use, offering high performance for various painting and coating applications. Understanding its features and functions is crucial for optimal results.

2. Segurtasun informazioa

Always observe safety precautions to reduce the risk of fire, electric shock, and personal injury. This equipment operates under high pressure, which can cause serious injury.

• Irakurri argibide guztiak: Familiarize yourself with the sprayer's operation and safety guidelines.
• Erabili babes pertsonaleko ekipamendu (BPE) egokia: This includes safety glasses, gloves, and a respirator.
• Ziurtatu aireztapen egokia: Operate in a well-ventilated area to avoid inhaling fumes.
• Ground the equipment: Always connect the sprayer to a properly grounded outlet.
• Never point the spray gun at yourself or others: High-pressure fluid can penetrate skin and cause severe injury.
• Presioa arindu: Always relieve system pressure before cleaning, checking, or servicing any part of the sprayer.
• Use compatible materials: Ensure all paints and solvents are compatible with the sprayer components.

3. Produktua amaitu daview

The Graco Ultra 695 XT is an electric airless sprayer designed for heavy-duty applications. It features a robust motor and pump system mounted on a durable Hi-Boy cart for easy portability.

3.1. irudia: Complete Graco Ultra 695 XT Airless Sprayer setup, including the main unit on its Hi-Boy cart, high-pressure hose, and spray gun. This image shows the full system ready for operation.

3.2. irudia: Aldea view of the Graco Ultra 695 XT main sprayer unit mounted on its Hi-Boy cart. This view highlights the robust frame and large wheels designed for mobility on job sites.

3.3. irudia: Aurrealdea view of the Graco Ultra 695 XT sprayer's pump and motor assembly. This image provides a clear look at the control panel and fluid section components.

Funtsezko osagaiak:

• Motor eta ponpa muntaketa: Provides the power for high-pressure fluid delivery.
• Hi-Boy Cart: Wheeled frame for easy transport and stability.
• Presio handiko mahuka: Connects the sprayer to the spray gun.
• Spray pistola: Controls the application of material.
• Fluid Section: Draws material from the container and pressurizes it.
• Presioaren kontrola: Adjusts the spraying pressure.

4. Konfigurazioa

Proper setup is crucial for safe and effective operation.

1. Deskargatu eta ikuskatu: Remove all components from the packaging. Inspect for any shipping damage.
2. Saskia muntatu: If not pre-assembled, attach the wheels and handles to the Hi-Boy cart according to the included assembly guide.
3. Konektatu presio handiko mahuka: Securely attach one end of the high-pressure hose to the fluid outlet on the sprayer and the other end to the spray gun. Ensure all connections are tight.
4. Install the Spray Tip: Insert the appropriate spray tip into the spray gun guard and secure it.
5. Konektatu energia: Plug the sprayer into a grounded electrical outlet. Ensure the power source matches the sprayer's voltage eskakizunak.
6. Materiala prestatu: Stir and strain your paint or coating material as recommended by the manufacturer. Place the suction tube into the material container.
7. Prestatu ihinztagailua: Follow the priming procedure outlined in the operating instructions to remove air from the system and fill it with material.

5. Funtzionamendu-argibideak

Follow these steps for safe and effective spraying.

5.1. Ihinztagailua prestatzea

1. Ensure the prime/spray valve is in the "Prime" position.
2. Place the drain tube into a waste bucket.
3. Turn on the sprayer and slowly increase the pressure until material flows smoothly from the drain tube, free of air bubbles.
4. Ihinztagailua itzali.

5.2. Ihinztatzea

1. After priming, turn the prime/spray valve to the "Spray" position.
2. Turn on the sprayer and set the desired pressure using the pressure control knob.
3. Test the spray pattern on a piece of cardboard or scrap material. Adjust pressure as needed for an even pattern.
4. Maintain a consistent distance and speed while spraying for uniform coverage.
5. Always release the spray gun trigger when moving or adjusting your position.

5.3. Itzaltzea

1. Ihinztagailua itzali.
2. Turn the prime/spray valve to the "Prime" position.
3. Engage the spray gun trigger lock.
4. Relieve pressure by holding the spray gun into a waste bucket and disengaging the trigger lock, then pulling the trigger until all pressure is released.
5. Deskonektatu korronte-kablea.

6. Mantentzea

Regular maintenance ensures the longevity and performance of your sprayer.

6.1. Erabilera bakoitzaren ondoren garbiketa

1. After relieving pressure, remove the suction tube from the material and place it into a bucket of appropriate cleaning solution (water for latex, mineral spirits for oil-based paints).
2. Place the drain tube into a waste bucket.
3. Turn the prime/spray valve to "Prime" and turn on the sprayer. Allow the cleaning solution to circulate until it runs clear from the drain tube.
4. Turn the prime/spray valve to "Spray" and spray the cleaning solution through the gun into a waste bucket until it runs clear.
5. Turn off the sprayer, relieve pressure, and disconnect the power.
6. Remove and clean the spray tip and filter separately.

6.2. Biltegiratzea

For long-term storage, flush the system with pump protector fluid to prevent corrosion and freezing.

6.3. Ohiko egiaztapenak

• Inspect hoses for wear, cuts, or leaks.
• Check spray gun for proper function and cleanliness.
• Ziurtatu konexio guztiak estuak direla.

7. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei heltzen die.

For issues not listed here, refer to the comprehensive troubleshooting guide in the full Graco service manual or contact Graco customer support.

8. Zehaztapenak

9. Bermea eta Laguntza

For detailed warranty information, please refer to the warranty card included with your product or visit the official Graco website. For technical assistance, parts, or service, contact Graco customer support directly.

Oharra: Baimenik gabeko konponketek edo aldaketek zure bermea baliogabetu dezakete.