efperfect Modern 3 Lights Glass Pendant Light Instruction Manual

Sarrera

Eskerrik asko erosketagatik.asing the efperfect Modern 3 Lights Glass Pendant Light, model EF1408736001. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before beginning installation and retain them for future reference.

This pendant light features three distinct smoky gray glass lampshades, designed to enhance various indoor spaces with a blend of modern and vintage estetika.

Figure 1: The efperfect Modern 3 Lights Glass Pendant Light, showcasing its design in a bright room.

Figure 2: The pendant light enhancing a dining room setting.

Figure 3: The pendant light providing illumination in a bedroom.

Segurtasun Informazioa

• OHARRA: To avoid electric shock, always disconnect power at the main circuit breaker or fuse box before installation or servicing.
• Konexio elektriko guztiak tokiko kodeen, ordenantzen edo Kode Elektriko Nazionalaren (NEC) arabera egin behar dira. Kontsultatu elektrizista kualifikatu bati kableatu elektrikoekin ohituta ez bazaude.
• Ziurtatu elementua sabaiko egitura-osagai bati ondo finkatuta dagoela.
• Ez gainditu gehienezko wat-atagBonbilletarako zehaztutakoa.
• Kontu handiz maneiatu beirazko osagaiak haustura saihesteko.
• Aparailu hau barruko erabilerarako soilik diseinatuta dago.

Paketearen edukia

Instalazioarekin jarraitu aurretik, egiaztatu osagai guztiak daudela eta kalterik gabe daudela.

• Ceiling Canopy with integrated wiring
• 3 Beira Lampshades (various shapes and sizes)
• Mounting Hardware (crossbar, mounting screws, wire connectors)
• Adjustable Hanging Wires (pre-attached to canopy and lamp titularrak)
• Argibide eskuliburua

Oharra: E26 bonbillak ez daude barne eta aparte erosi behar dira.

Zehaztapenak

Konfigurazioa eta Instalazioa

Instalazio profesional bat egitea gomendatzen da. Jarraitu aurretik, ziurtatu etengailuan korrontea itzalita dagoela.

1. Prestatu instalazioa

• Turn off electricity at the main fuse box or circuit breaker.
• Osagai guztiak arretaz deskonprimitu eta kalterik dagoen egiaztatu.
• Gather necessary tools (screwdriver, wire strippers, electrical tape, ladder).

2. Mount the Crossbar

Attach the mounting crossbar to the junction box in your ceiling using the provided screws. Ensure it is securely fastened.

Figure 4: Installation diagram illustrating the mounting process and electrical connections.

3. Hari-konexioak

• Konektatu argiaren lurrerako kablea (normalean kobre biluzia edo berdea) etxeko lurrerako kableari.
• Konektatu aparatuaren neutro kablea (normalean zuria) etxeko neutro kablearekin (zuria).
• Connect the fixture's live wire (usually black) to the house live wire (black).
• Secure all connections with wire connectors and wrap with electrical tape for added safety.

5. irudia: Xehetasuna view of the ceiling canopy and wiring points before final installation.

4. Secure the Ceiling Canopy

Carefully tuck all wires into the junction box. Align the ceiling canopy with the mounting screws on the crossbar and secure it with the provided decorative nuts or screws.

5. Adjust Hanging Wires

The hanging wires for each glass globe are adjustable. To adjust the length, gently push the small pin on the canopy where the wire enters, then pull or push the wire to the desired length. Release the pin to lock the wire in place. Ensure the wires are taut and the globes hang evenly or as desired.

Figure 6: The three distinct glass shades with adjustable hanging wires, allowing for customized arrangement.

6. Bonbillak instalatu

Screw E26 base bulbs (not included) into each lamp holder. Ensure bulbs are fully seated. The fixture supports incandescent, LED, CFL, and halogen bulbs up to 60W each. For dimming functionality, use dimmable E26 bulbs and a compatible dimmer switch (not included).

Figure 7: Detail of an E26 bulb correctly installed within a glass shade.

7. Attach Glass Shades

Carefully attach each glass lampshade to its respective lamp holder according to the design. Ensure they are securely fastened but do not overtighten.

Figure 8: The efperfect pendant light installed, demonstrating its aesthetic appeal in a living space.

Funtzionamendu-argibideak

• Piztu/Itzaltzea: Once installed and power is restored, operate the light fixture using your wall switch.
• Iluntzeko funtzionaltasuna: If you have installed dimmable E26 bulbs and a compatible dimmer switch, you can adjust the light intensity by using the dimmer switch.

Figure 9: Visual representation of the dimmable feature and potential light color temperatures when using compatible bulbs.

Mantentzea

• Garbiketa: Disconnect power before cleaning. Wipe the fixture and glass shades with a soft, dry, or slightly damp oihal. Ez erabili garbitzaile edo disolbatzaile urratzailerik, akabera edo beira kaltetu baitezakete.
• Bonbillaren ordezkoa: Ensure power is off. Allow bulbs to cool completely before attempting to replace them. Unscrew the old bulb and screw in a new E26 bulb of the appropriate wattage (gehienez 60W).

Arazoak konpontzea

Bermearen informazioa

efperfect offers a 60-day return service for any damaged or defective product. Additionally, free replacement is provided for any non-working or broken part within five years of purchase. Please retain your proof of purchase for warranty claims.

Bezeroarentzako Arreta

If you encounter any issues or have questions regarding your efperfect Modern 3 Lights Glass Pendant Light, please contact our customer support team. We aim to respond to inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official efperfect store online.

Thank you for choosing efperfect.