1. Sarrera
This manual provides comprehensive instructions for the installation, operation, and maintenance of your MONTECH HyperFlow ARGB 360 AIO CPU Liquid Cooler. Designed for optimal thermal performance, this cooler features an enhanced 3100RPM water pump and three Metal Pro 12 ARGB cooling fans, ensuring efficient heat dissipation for Intel and AMD compatible systems.
2. Produktuaren ezaugarriak
- Industry-leading 6-year warranty period for peace of mind.
- Gemstone design water pump with a rapid 3100RPM speed for efficient heat dissipation.
- Metal Pro 12 ARGB 28mm Fans operating at 2200 RPM for robust airflow pressure.
- Slim 27mm radiator with a single-row 20FPI fin design for powerful and efficient cooling.
- Flexible compatibility with Intel LGA 1700/1200/15X/2066 and AMD AM3/AM4/AM5 motherboard platforms.
- Simplified cable management with a pre-connected 7-pin short cable, compatible with 4-pin and 5V3pin connectors.
- Pre-installed fans and pre-applied thermal paste for quick setup.
3. Paketearen edukia
Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:
- MONTECH HyperFlow ARGB 360 AIO Unit (Radiator, Pump, and Fans pre-assembled)
- Mounting Hardware for Intel LGA 1700/1200/15X/2066 sockets
- Mounting Hardware for AMD AM3/AM4/AM5 sockets
- Thermal Paste (pre-applied on cold plate)
- Thermal Paste Stencil (for reapplication)
- Erabiltzailearen eskuliburua
4. Konfigurazioa eta instalazioa
Follow these steps for proper installation of your HyperFlow ARGB 360 AIO cooler. Ensure your system is powered off and unplugged before proceeding.
4.1 Instalazioaren aurreko egiaztapena
The fans are pre-installed on the radiator, and thermal paste is pre-applied to the cold plate. This simplifies the installation process significantly.
4.2 Mounting the Radiator and Fans
Mount the radiator and fans to an available 360mm mounting location in your PC case (e.g., top, front). Ensure proper airflow direction for optimal cooling.
4.3 Installing the Water Block
Select the appropriate mounting bracket for your CPU socket (Intel LGA 1700/1200/15X/2066 or AMD AM3/AM4/AM5). Secure the water block to your CPU according to the specific instructions for your motherboard and socket type. Ensure even pressure for proper thermal contact.
4.4 Kableen konexioak
The cooler features a pre-connected 7-pin short cable for simplified wiring. Connect the 4-pin PWM connector to your motherboard's CPU_FAN header and the 5V3pin ARGB connector to a compatible ARGB header on your motherboard for lighting control.
5. Funtzionamendu-argibideak
Once installed, the MONTECH HyperFlow ARGB 360 operates automatically, regulating pump and fan speeds based on CPU temperature. Ensure your motherboard's BIOS/UEFI settings are configured to allow PWM control for the CPU fan header.
5.1 Fan and Pump Operation
- Ur-ponpa: Operates at a maximum rotational speed of 3100 RPM, ensuring rapid coolant circulation.
- Hozteko zaleak: Metal Pro 12 ARGB fans operate up to 2200 RPM, providing robust airflow.
- Zarata maila: The cooler is designed for quiet operation, with a typical noise level of 28 dB.
5.2 ARGB Argiztapen Kontrola
The ARGB lighting can be controlled via your motherboard's RGB software (if compatible with 5V3pin ARGB headers) or a dedicated ARGB controller (not included).
6. Mantentzea
Mantentze-lan erregularrak zure AIO hozkailuaren errendimendu optimoa eta iraupena bermatzen ditu.
- Hautsa kentzea: Aldian-aldian garbitu erradiadorearen hegatsetatik eta haizagailuaren paletatik hautsa aire konprimatua edo eskuila leun bat erabiliz. Ziurtatu haizagailuak ez direla biraka ari garbiketa bitartean.
- Pasta termikoa: The pre-applied thermal paste is designed for long-term use. If you need to remove and re-install the water block, clean off old thermal paste and apply new paste using the provided stencil for even coverage.
- Hodien ikuskapena: Occasionally inspect the tubing for any signs of kinks, leaks, or damage.
7. Arazoak
If you encounter issues with your cooler, refer to the following common troubleshooting steps:
- CPUaren tenperatura altuak:
- Ensure the water block is securely mounted and making good contact with the CPU.
- Verify that the pump is running (you may feel a slight vibration or hear a faint hum). Check pump power connection.
- Confirm fans are spinning and airflow is unobstructed.
- Check thermal paste application. Reapply if necessary.
- Haizagailuak ez dira biratzen/ARGB ez da argitzen:
- Check all power and ARGB cable connections to the motherboard.
- Ensure appropriate headers are enabled in BIOS/UEFI.
- Test fans/ARGB with different headers or a known working setup if possible.
- Ezohiko zaratak:
- A gurgling sound immediately after installation may indicate air bubbles. This usually resolves itself over time.
- Ziurtatu kableek ez dutela haizagailuaren palei oztopatzen.
8. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Modelo zenbakia | HyperFlow ARGB 360 Black |
| Produktuaren neurriak | 15.63"L x 4.72"Z x 1.06"A (39.7 x 12 x 2.7 cm) |
| Pisua | 4.23 libra (1.92 kg) |
| Hozteko metodoa | Ura hoztea |
| Ponparen Abiadura | Gehienez 3100 RPM |
| Fan Abiadura | Max 2200 RPM (Metal Pro 12 ARGB) |
| Zarata Maila | 28 dB (tipikoa) |
| Energia konektore mota | 4-Pin (PWM) |
| ARGB Connector Type | 5V3pin |
| liburukiatage | 5 Volt |
| Wattage | 14.28 watt |
| Gailu bateragarriak | Joko ordenagailua |
| CPU Socket bateragarritasuna | Intel LGA 1700/1200/15X/2066, AMD AM3/AM4/AM5 |
| Erradiadorea Materiala | Aluminum (with 20 FPI fin design) |
9. Bermea eta Laguntza
MONTECH provides an industry-leading 6 urteko bermea for the HyperFlow ARGB 360 AIO CPU Liquid Cooler. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact MONTECH customer service through their official webproduktua erosi zen gunea edo dendaria.
