GOOLOO GP4000 Abiarazle eta GT150 Pneumatikoen Puzgailuaren Erabiltzaile Eskuliburua

1. Sarrera

Eskerrik asko erosketagatik.asing the GOOLOO GP4000 Jump Starter and GT150 Tire Inflator. This comprehensive device combines a powerful car jump starter with a versatile portable air compressor, designed to provide reliable emergency assistance and convenient tire maintenance for a wide range of vehicles and inflatable items. Please read this manual thoroughly before use to ensure proper operation and safety.

Image: The GOOLOO GP4000 Jump Starter (right) and GT150 Tire Inflator (left), showcasing both devices included in the package.

2. Segurtasun informazioa

Beti jarraitu segurtasun neurri hauek gailuei lesioak edo kalteak saihesteko:

• Do not expose the devices to extreme temperatures, direct sunlight, or moisture.
• Mantendu haurren eskura.
• Ziurtatu aireztapen egokia erabiltzen eta kargatzen ari den bitartean.
• Ez desmuntatu edo aldatu gailuak.
• For jump starting, connect the red clamp terminal positibora (+) eta cl beltzeraamp to the negative (-) terminal. Reverse polarity can cause damage.
• Avoid over-inflating tires or other items. Always refer to the manufacturer's recommended pressure.
• Bateria clamps touch each other, a spark may occur. Avoid this contact.
• Ez erabili abiarazle elektrikoa bateria itxita badago.amps edo kableak hondatuta daude.

3. Paketearen edukia

Mesedez, egiaztatu paketea elementu hauek dituen:

• GOOLOO GP4000 Jump Starter Unit
• GOOLOO GT150 Tire Inflator Unit
• Smart Jumper Cables (with clamps)
• USB-C kargatzeko kablea
• Various Air Nozzles/Adapters for GT150
• Erabiltzailearen eskuliburua
• Biltegiratze-kutxa (paketearen arabera alda daiteke)

4. Produktuaren ezaugarriak eta osagaiak

4.1 GOOLOO GP4000 Abiarazle-abiarazlea

The GP4000 is a powerful and versatile jump starter designed for various vehicles.

• Korronte gailurra: 4000 Amps
• Motorra bateragarritasuna: All gasoline engines, up to 10.0L diesel engines.
• Irteerako atakak: Dual USB charging ports (one supports fast charging), USB Type-C (5V/3A).
• Sarrerako ataka: USB Type-C for recharging the unit.
• Segurtasun Ezaugarriak: Reverse polarity protection, over-current protection, short-circuit protection, over-voltage protection, over-charge protection.
• Ezaugarri gehigarriak: LED flashlight with multiple modes (steady, strobe, SOS).

Irudia: Xehetasun handikoa view of the GOOLOO GP4000 Jump Starter, highlighting its LED indicator, power button, Type-C input/output, quick charging output, and 15V/10A output port.

Image: The GOOLOO GP4000 Jump Starter demonstrating its capacity to charge multiple devices like smartphones and tablets, suitable for outdoor use.

4.2 GOOLOO GT150 Pneumatikoen puzgailua

The GT150 is a compact and efficient portable air compressor.

• Presio maximoa: 150 PSI
• Inflazio moduak: 5 preset modes (car, motorcycle, bicycle, ball, customize).
• Presio-unitateak: PSI, KPA, BAR, KG/CM².
• Pantaila: Ultra-bright LED screen for real-time and preset pressure values.
• Itzaltze automatikoa: Automatically stops when preset pressure is reached.
• Eramangarritasuna: Cordless design, easy to carry.

Image: The GOOLOO GT150 Tire Inflator displaying its large LED screen, which provides clear visibility of pressure readings even in bright conditions.

5. Konfigurazioa eta kargatzea

5.1 GP4000 abiarazlea kargatzea

Before first use, fully charge the GP4000. It is recommended to recharge the unit after each use or every 3-6 months if not used frequently.

1. Connect the USB-C charging cable to the Type-C input port on the GP4000.
2. Connect the other end of the cable to a USB wall adapter (not included) or a powered USB port.
3. The LED indicators will show the charging progress. All LEDs will be solid when fully charged.

5.2 GT150 pneumatikoen puzgailua kargatzea

The GT150 also requires charging before use. Use the provided USB-C cable.

1. Connect the USB-C charging cable to the charging port on the GT150.
2. Connect the other end to a USB wall adapter or powered USB port.
3. Pantailak kargatze-egoera adieraziko du.

6. Funtzionamendu-argibideak

6.1 GP4000 abiarazle elektrikoa erabiltzea

Follow these steps to jump start a vehicle:

1. Ensure the GP4000 is sufficiently charged.
2. Connect the blue plug of the smart jumper cables into the jump start port on the GP4000.
3. Konektatu gorria clamp to the vehicle's positive (+) battery terminal.
4. Konektatu beltza clamp to the vehicle's negative (-) battery terminal.
5. Once connected, the indicator light on the smart cable will turn green (or solid green if using BOOST function). If the light is red or flashing, check connections.
6. Piztu ibilgailuaren motorra.
7. Once the vehicle starts, immediately remove the jumper cables from the GP4000, then disconnect the black clamp, ondoren cl gorriaamp ibilgailuaren bateriatik.

Note on BOOST Function: If the vehicle battery is extremely low or completely dead, the smart cable may not detect it. In this case, press and hold the "BOOST" button on the smart cable for 3 seconds until the indicator light turns solid green. This bypasses safety checks and forces the jump start. Use with caution.

Image: The GOOLOO GP4000 Jump Starter connected to a car battery, demonstrating the proper setup for jump starting a vehicle.

Image: A comparison highlighting the robust, copper-material clamps of the GOOLOO jump starter against other types, emphasizing durability and reliability.

6.2 GT150 pneumatikoen puzgailua erabiltzea

Inflate tires or other items using the GT150:

1. Ensure the GT150 is sufficiently charged.
2. Connect the air hose to the tire valve stem. Ensure a secure connection to prevent air leakage.
3. Turn on the GT150. The current tire pressure will be displayed.
4. Press the 'M' button to cycle through the 5 preset inflation modes (car, motorcycle, bicycle, ball, custom).
5. Use the '+' and '-' buttons to adjust the desired target pressure.
6. Press the power button to start inflation. The inflator will automatically stop when the target pressure is reached.
7. Disconnect the air hose from the tire valve.

Unitateak aldatzea: Press the unit button (often labeled with a symbol like a gear or 'U') to switch between PSI, KPA, BAR, and KG/CM².

Image: The GOOLOO GT150 Tire Inflator in use, demonstrating its cordless operation while inflating a car tire.

Image: The GOOLOO GT150 Tire Inflator showing its display with both real-time and preset pressure values, indicating its auto shut-off feature.

Image: The GOOLOO GT150 Tire Inflator positioned with various items it can inflate, including car tires, motorcycle tires, bicycle tires, and balls, illustrating its versatility.

7. Mantentzea

• Garbiketa: Garbitu gailuak zapi leun eta lehor batekin. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Biltegiratzea: Gorde gailuak leku fresko eta lehor batean, eguzki-argitik eta hezetasunetik babestuta.
• Bateria zaintzea: For optimal battery life, fully charge both units every 3-6 months, even if not in use.
• Kableen ikuskapena: Regularly inspect the jumper cables and air hose for any signs of damage or wear. Replace if necessary.

8. Arazoak

9. Zehaztapenak

10. Bermea eta Laguntza

GOOLOO products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your GP4000 Jump Starter or GT150 Tire Inflator, please contact GOOLOO customer service through their official webproduktua erosi zen gunea edo dendaria.

For more information, visit the official GOOLOO store: GOOLOO denda Amazonen