aigo AF12 3-in-1 ARGB Fan Kit Instruction Manual

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Produktuaren Ezaugarriak

The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:

• Eredua: AF123IN1-BK
• Fan kantitatea: 3 x 120 mm-ko haizagailu
• Fan abiadura: 800-2000 RPM (±% 10)
• Fan Noise Level: ≤30dBA
• Aire-fluxua: 86.6 CFM
• Presio estatikoa: 1.27mm-H²O
• Working Current (Motor): ≤0.2A (12V)
• Working Current (Light): ≤0.48A (5V)
• Neurriak: 120 x 120 x 25 mm
• ARGB argiztapena: Addressable RGB lighting for customizable effects.

Paketearen edukia

Egiaztatu behean zerrendatutako elementu guztiak zure paketean daudela:

• 3 x aigo AF12 ARGB Fans
• Muntatzeko Torlojuak
• ARGB Controller (if included in kit)
• Cables (Power, ARGB Sync)

Instalazio Gida

Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.

1. Prestatu zure sistema: Power off your computer and disconnect it from the power source. Open your computer case.
2. Muntatzeko kokapenak identifikatu: Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
3. Haizagailuak muntatu: Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
   

   Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
4. Konektatu elikatze-kableak: Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
5. Connect ARGB Cables: Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
   

   Irudia: Alboko profesional batfile of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.

6. Kableen kudeaketa: Route cables neatly to prevent interference with other components and to improve airflow.
7. Itxi kaxa eta piztu: Close your computer case, reconnect the power, and power on your system.

Funtzionamendu-argibideak

Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

Fan Abiadura Kontrola

Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.

ARGB Argiztapen Kontrola

If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.

If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.

Mantentzea

Regular maintenance ensures optimal performance and extends the lifespan of your fans.

• Hautsa garbitzea: Aldian-aldian garbitu hautsa haizagailuaren palen eta karkasaren gainetik aire konprimatua edo eskuila leun bat erabiliz. Ziurtatu sistema itzalita dagoela garbitu aurretik.
• Kablearen egiaztapena: Verify that all cables are securely connected and free from damage.
• Zarataren monitorizazioa: Listen for unusual noises, which may indicate a fan bearing issue or obstruction.

Arazoak konpontzea

If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:

Haizagailuak ez biratzen

• Egiaztatu energia-konexioa: Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
• Egiaztatu BIOS ezarpenak: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
• Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.

ARGB Lights Not Working

• Egiaztatu ARGB konexioa: Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
• Check Software: Confirm that your motherboard's ARGB software is installed and configured correctly.
• Bateragarritasuna: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.

Gehiegizko Zarata

• Begiratu oztoporik dagoen: Ensure no cables or other components are touching the fan blades.
• Muntatzeko torlojuak: Verify that all mounting screws are tightened to prevent vibrations.
• Hauts-pilaketa: Clean any dust from the fan blades.

Zehaztapen Teknikoak

Bermea eta Laguntza

This aigo product comes with a 12 hilabeteko bermea erosketa-datatik aurrera, fabrikazio-akatsak estaliz.

For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their webgunea.

Official aigo Store: aigo Store on Amazon