Sarrera
This manual provides essential information for the proper setup, operation, and maintenance of your Aguilar Gen 2 TH 500 500-watt Bass Amplifier. Please read this manual thoroughly before using the amperrendimendu eta iraupen optimoa bermatzeko lifikatzailea.
Segurtasun informazio garrantzitsua
- Energia iturria: Konektatu ampzehaztutako bolumenera bakarrik bizigarritage (100-240VAC, 50/60Hz).
- Aireztapena: Ziurtatu aireztapen egokia dagoela. Ez blokeatu aireztapen-irekidurak.
- Hezetasuna: Ez jarri unitatea euri edo hezetasunera.
- Zerbitzua: Konponketa guztiak zerbitzu-langile kualifikatuei eskatu. Ez saiatu produktu hau zeuk konpontzen.
- Metxa: The internal fuse is 6.3A/250V.
- 65. proposamena Abisua: Produktu honek Kaliforniako estatuak minbizia eta jaiotzako akatsak edo ugalketa beste kalteak sor ditzakeen produktu kimikoak izan ditzake.
Ezaugarri nagusiak
- Powerful 500 watts of output.
- 3-band EQ with semi-parametric midrange for precise tone shaping.
- Drive control for added grit and punch.
- Supports a 2.67-ohm speaker load.
- Universal mains for international voltage bateragarritasuna.
- Eramangarritasunerako diseinu arina.
- XLR DI out for direct connection to a mixer or PA system.
- Entzungailuen irteera isilpeko praktikarako.
- IR loader for cabinet simulation technology integration.
- High-quality components for durability.
Konfigurazio Gida
1. Desontziratzea eta ikuskatzea
Kendu arretaz amplifier from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. Retain all packaging materials for future transport or service needs.
2. Potentziara konektatzen
Connect the provided power cable to the IEC inlet on the rear panel of the amplifier and then to a grounded AC outlet. The amplifier supports universal mains (100-240VAC, 50/60Hz).
Image: Rear panel connections including the power inlet and power switch.
3. Bozgorailu konexioak
Connect your bass speaker cabinet(s) to the "SPEAKER OUTPUT" on the rear panel using a SpeakON cable. The amplifier supports a minimum total speaker load of 2.67 ohms. Ensure your cabinet's impedance matches or exceeds this requirement.
Image: Detail of the SpeakON speaker output on the rear panel.
4. Tresnaren sarrera
Connect your bass guitar to the "INPUT" jack on the front panel using a standard 1/4-inch instrument cable. If your instrument has a very high output, you can engage the -10dB pad switch located next to the input jack to prevent signal clipping.
Image: Front panel with input and -10dB pad switch.
Funtzionamendu-argibideak
1. Piztu/Itzaltzea
After all connections are made, flip the power switch on the rear panel to the "ON" position. The "STATUS" indicator on the front panel will illuminate. Always turn the amplifier off when not in use.
2. Aurrealdeko panelaren kontrolak
Image: Front panel controls overview.
- IRABAZIA: Controls the input level of your instrument. Adjust for desired signal strength without clipping.
- GIDATU: Adds harmonic content and overdrive. Turn clockwise for more saturation.
- ERDI MAILA: Adjusts the boost or cut of the midrange frequencies.
- MAIZTASUN ERTAINA: Selects the center frequency for the MID LEVEL control (180 Hz to 1 kHz).
- BAXUA: Maiztasun baxuko erantzuna kontrolatzen du.
- Treble: Maiztasun handiko erantzuna kontrolatzen du.
- bolumena: Irteerako bolumenaren kontrola.
- MUTU: Isilarazten du amplifier output to the speaker and DI.
- DI.1 (XLR DI Out): Provides a balanced output for connecting to a mixing console or recording interface.
- AURRERA/BIZI: Selects whether the DI signal is taken before (PRE) or after (POST) the EQ section.
- IGOGAILUA/LURRA: Lurrerako altxatze-etengailua burrunba ezabatzeko.
3. Rear Panel Connections and Controls
Image: Rear panel connections and controls overview.
- BOZLARIAREN IRTEERA: SpeakON connector for speaker cabinets. Minimum total impedance 2.67 ohms.
- EFFECTS LOOP (SEND/RETURN): For connecting external effects pedals.
- AUX IN: 1/8-inch stereo input for connecting external audio devices (e.g., MP3 player) for practice.
- AURIKULARRA: 1/8-inch stereo output for silent practice. The "MIX" knob adjusts the balance between instrument and AUX IN.
- SINTONIZADORA IRTEERA: Unbuffered output for connecting an external tuner.
- USB-C: For connecting to a computer for firmware updates and IR loader management.
- CAB IR SELECT (1, 2, 3): Selects between loaded Impulse Responses for cabinet simulation.
Mantentzea
- Garbiketa: Erabili zapi leun eta lehor bat garbitzeko amplifier's exterior. Do not use liquid cleaners or solvents.
- Aireztapena: Regularly check that the ventilation fan and vents are clear of dust and debris.
- Biltegiratzea: Gorde amplifier in a dry, temperature-controlled environment when not in use.
- Fusiblearen ordezkapena: Fuse replacement should only be performed by qualified personnel. The internal fuse is 6.3A/250V.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Ez dago soinu irteerarik |
|
|
| Soinu distortsionatua |
|
|
| Burrunba edo zarata |
|
|
Zehaztapenak
- Irteera Wattage: 500 Watt
- Elementuaren eredu-zenbakia: TH500V2
- Elementuaren pisua: 4 kilo
- Produktuaren neurriak: 12 x 6 x 14.5 hazbete
- Energia iturria: Kable elektrikoa
- Sarrera boltage: 100-240VAC, 50/60Hz (Universal Mains)
- Barne fusiblea: 6.3A/250V
- Minimum Speaker Load: 2.67 ohmio
- Materiala: Metala
- Gailu bateragarriak: Gitarra baxua
- Konektore mota: 6.35mm Jack (Input), SpeakON (Speaker Out), XLR (DI Out), 1/8-inch (Aux In, Headphone Out, Tuner Out), USB-C
Bermea eta Laguntza
For warranty information and technical support, please visit the official Aguilar website or contact your authorized Aguilar dealer. Keep your purchase receipt as proof of purchase.
