Globo Lighting BOSTON Outdoor Pedestal Light

1. Sarrera

Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.

2. Segurtasun-argibideak

• Segurtasun elektrikoa: Instalazioa elektrizista kualifikatu batek egin behar du, tokiko eta estatuko arau elektriko guztien arabera. Deskonektatu beti korrontea zirkuitu nagusiko etengailutik instalazioa, mantentze-lanak edo bonbilla ordezkatu aurretik.
• Kanpoko erabilera: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
• Bonbilla mota: Use only E27 bulbs with the specified wattage. Ez gainditu gehienezko wat-atage fixturean adierazita.
• Manipulazioa: Kontu handiz maneiatu tresna. Saihestu erortzea edo kolpe bortitzak jasatea.
• Garbiketa: Do not use abrasive cleaners or solvents. Clean with a soft, damp oihal.
• Beroa: Allow the bulb to cool completely before attempting to replace it.

3. Paketearen edukia

Mesedez, egiaztatu osagai guztiak daudela eta kalterik ez dutela instalazioa hasi aurretik:

• 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
• 1x Muntatzeko oinarria
• 1x Set of Mounting Hardware (screws, anchors)
• 1x Erabiltzailearen eskuliburua

Note: E27 bulb is not typically included and must be purchased separately.

4. Zehaztapenak

5. Konfigurazioa eta instalazioa

Garrantzitsua: Instalazioa hasi aurretik, ziurtatu korronte-iturri nagusia etengailu elektrikoan itzalita dagoela.

1. Aukeratu kokapena: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
2. Prestatu kableatua: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
3. Muntatu oinarria: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
4. Konektatu kable elektrikoak: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
5. Instalatu Bonbilla: Insert a suitable E27 bulb (not included) into the lamp titularra. Ez estutu gehiegi.
6. Gailu segurua: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
7. Berrezarri boterea: Instalazioa amaitutakoan eta konexio guztiak ondo finkatuta daudenean, berrezarri korrontea etengailu nagusitik.

Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.

6. Funtzionamendu-argibideak

The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.

• Piztu: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
• Mugimendu-sentsorea: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
• Itzaltze automatikoa: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
• Egun/Gau Sentsorea: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.

Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.

Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.

7. Mantentzea

• Garbiketa: Aldian-aldian garbitu tresna leun batekin, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
• Bonbillaren ordezkoa:
  1. Ensure the power supply to the fixture is turned off at the circuit breaker.
  2. Utzi bonbilla zaharra guztiz hozten ukitu aurretik.
  3. Carefully unscrew the top cover or access panel to reach the E27 bulb.
  4. Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
  5. Securely reattach the cover or access panel, ensuring a watertight seal.
  6. Berrezarri boterea.
• Ikuskapena: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.

8. Arazoak

If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.

9. Bermea eta Laguntza

This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.

Harremanetarako informazioa normalean produktuaren ontzian edo fabrikatzailearen ziurtagiri ofizialean aurki daiteke. webgunea.