TOTAL 20V Cordless Brushless Impact Wrench

1. Sarrera

Thank you for choosing the TOTAL 20V Cordless Brushless Impact Wrench, Model TIWLI2085. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your tool. Please read it thoroughly before use and keep it for future reference.

Figure 1: The TOTAL TIWLI2085 impact wrench with its 20V battery installed, showcasing its compact design and readiness for operation.

2. Segurtasun Jarraibide Orokorrak

Jarraitu beti oinarrizko segurtasun neurriak sute, deskarga elektriko eta lesio pertsonalen arriskua murrizteko tresna elektrikoak erabiltzean.

• Lan eremuko segurtasuna: Mantendu zure lan-eremua garbi eta ondo argiztatuta. Gune nahasi edo ilunetan istripuak gerta daitezke. Ez erabili tresna elektrikorik leherketa-atmosferan, hala nola likido, gas edo hauts sukoien aurrean.
• Segurtasun elektrikoa: Saihestu gorputza lurrera konektatutako edo lurrera konektatutako gainazalekin kontaktuan jartzea. Ez jarri tresna elektrikoak euripean edo hezetasunean.
• Segurtasun pertsonala: Beti eraman begien babesak. Erabili entzumen-babesak denbora luzez lanean ari zarenean. Jantzi behar bezala; saihestu arropa edo bitxi solteak. Lotu ile luzea.
• Tresnaren erabilera eta zaintza: Ez behartu tresna elektrikoa. Erabili zure aplikaziorako tresna egokia. Deskonektatu bateria-paketea tresna elektrikotik doikuntzak egin, osagarriak aldatu edo tresna elektrikoak gorde aurretik.
• Bateriaren erabilera eta zaintza: Recharge only with the charger specified by the manufacturer. Do not use battery packs with any other power tools. Do not open, crush, or expose battery packs to fire or high temperatures.

3. Produktua amaitu daview

The TOTAL TIWLI2085 is a powerful 20V cordless brushless impact wrench designed for heavy-duty fastening and loosening applications. It features a robust brushless motor for extended tool life and efficiency, an integrated LED work light for improved visibility, and multiple speed/impact settings for versatile use.

Dakarten osagaiak:

• 1 x TOTAL 20V Cordless Brushless Impact Wrench (TIWLI2085)
• 2 x 4.0Ah Lithium-Ion Batteries (TFBLI2002)
• 1 x Charger (TFCLI2001E, 220-240V~50/60Hz)
• 3 x Deep Impact Sockets (22mm, 24mm, 27mm)
• 1 x Eramateko poltsa

Figure 2: The TOTAL TIWLI2085 impact wrench displayed alongside the three included deep impact sockets (22mm, 24mm, 27mm), illustrating the complete kit.

4. Konfigurazioa

4.1 Bateria kargatzea

1. Connect the charger (TFCLI2001E) to a standard 220-240V~50/60Hz power outlet.
2. Slide the battery pack (TFBLI2002) onto the charger until it clicks into place.
3. The charging indicator light on the charger will illuminate, typically red for charging and green for fully charged.
4. Once fully charged, disconnect the charger from the power outlet and remove the battery pack.

Oharra: For optimal battery life, allow the battery to cool down before charging if it has been heavily used. Do not store batteries in a discharged state.

4.2 Attaching/Removing Sockets

1. Segurtasunerako, ziurtatu inpaktu-giltza itzalita dagoela eta bateria kenduta dagoela.
2. Align the square drive of the desired impact socket (e.g., 22mm, 24mm, or 27mm) with the 1/2 inch square drive anvil on the tool.
3. Push the socket firmly onto the anvil until it locks into place. Some sockets may require pulling back a retaining ring or pin.
4. To remove, reverse the process, pulling back the retaining mechanism if present, and pull the socket off.

5. Funtzionamendu-argibideak

5.1 Bateria instalatzea

Slide a charged battery pack into the base of the impact wrench handle until it clicks securely into place.

5.2 Piztea/itzaltzea eta norabidearen kontrola

• Aktibatu/Desaktibatuta: Squeeze the trigger switch to turn the tool on. Release the trigger to turn it off. The integrated LED work light will activate when the trigger is pressed.
• Norabidearen kontrola: Use the forward/reverse selector switch, typically located above the trigger, to choose the rotation direction (clockwise for fastening, counter-clockwise for loosening). Ensure the switch is fully engaged in the desired position before operating.

5.3 Speed and Impact Rate Adjustment

The TIWLI2085 features multiple speed and impact rate settings, allowing you to match the tool's performance to the task. Refer to the tool's controls for specific adjustment methods, which typically involve a button or switch to cycle through settings:

• Kargarik gabeko abiadura: 0-1600 / 0-2100 / 0-2400 RPM
• Eragin-tasa: 0-1500 / 0-1800 / 0-2200 BPM

Start with a lower setting for delicate tasks or when first engaging a fastener, and increase as needed.

5.4 Fastening and Loosening

1. Aukeratu finkagailurako egokia den entxufea.
2. Set the direction switch to the desired mode (forward for fastening, reverse for loosening).
3. Jarri entxufea finkagailuan.
4. Squeeze the trigger to begin operation. Apply steady pressure to keep the socket engaged.
5. For fastening, tighten until the desired torque is achieved. For loosening, continue until the fastener breaks free.

Figure 3: The TOTAL TIWLI2085 impact wrench being used to fasten a lug nut on a car wheel, demonstrating its application for automotive tasks.

Figure 4: The TOTAL TIWLI2085 impact wrench in action, fastening a bolt on a metal workpiece, highlighting its versatility for various heavy-duty applications.

6. Mantentzea

Regular maintenance ensures optimal performance and extends the life of your impact wrench.

• Garbiketa: Mantendu tresnaren aireztapen-irekidurak garbi eta hondakinik gabe. Erabili eskuoihal leun eta lehor bat.amp oihal bat erabili karkasa garbitzeko. Ez erabili produktu kimiko gogorrik edo garbitzaile urratzailerik.
• Bateria zaintzea: Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Do not store fully discharged batteries for extended periods.
• Ikuskapena: Periodically inspect the square drive anvil for wear or damage. Check the power cord of the charger for any cuts or fraying.
• Lubrifikazioa: This tool features a brushless motor and sealed components, requiring no user lubrication.

For any repairs or internal maintenance, contact qualified service personnel.

7. Arazoak

Atal honek zure inpaktu-giltzarekin izan ditzakezun arazo ohikoenak jorratzen ditu.

8. Zehaztapenak

Technical specifications for the TOTAL 20V Cordless Brushless Impact Wrench TIWLI2085:

9. Bermea eta Laguntza

TOTAL products are manufactured to high-quality standards. For warranty information, service, or technical support, please refer to the warranty card included with your product or contact your local TOTAL dealer or customer service center. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official TOTAL tools webwebgunean edo jarri harremanetan bere bezeroarentzako laguntzarekin.