Sarrera
The Pro-Ject T1 Evo Phono Turntable is designed to deliver high-fidelity audio for vinyl enthusiasts. This model features a built-in phono pre-amplifier, allowing for direct connection to various audio systems. It comes equipped with an Ortofon OM 10 moving magnet cartridge, pre-aligned for optimal performance. The turntable's plinth is CNC-machined, avoiding plastic components to minimize resonant hollow spaces, ensuring pure sound reproduction. An elegant dust cover with adjustable hinges and a low-capacitance Connect it Phono E RCA cable are included for convenience and quality.
Konfigurazio Gida
1. Desontziratzea eta kokatzea
Kontu handiz atera osagai guztiak paketetik. Jarri biragailua gainazal egonkor eta lau batean, eguzki-argitik, bero-iturrietatik eta bibrazio gehiegizkoetatik urrun. Ziurtatu aireztapen egokia dagoela unitatearen inguruan.
Figure 1: Pro-Ject T1 Evo Phono Turntable with dust cover open.
Figure 2: Pro-Ject T1 Evo Phono Turntable with dust cover closed, protecting the components.
2. Muntaketa
- Jarri platera ardatzaren gainean.
- Carefully place the felt mat on top of the platter.
- Attach the dust cover by aligning its hinges with the slots on the turntable's base.
3. Konexioak
Connect the included RCA cable from the turntable's output to an available input on your amplifier or powered speakers. Since this model has a built-in phono pre-amplifier, you can connect it directly to a line-level input (e.g., AUX, CD, Line In). Ensure the ground wire is connected from the turntable to your amplifagailuaren lurrerako terminala burrunba gutxitzeko.
Figure 3: Rear connections for RCA output and ground wire.
Connect the power adapter to the turntable and then to a wall outlet.
Funtzionamendu-argibideak
1. Piztu/Itzali
Locate the power switch on the side of the turntable. Flip the switch to the 'On' position to power on the unit. The platter will begin to rotate. Flip to 'Off' to power down.
4 irudia: Pizteko etengailuaren kokapena.
2. Disko bat erreproduzitzea
- Ensure the dust cover is open or removed.
- Place your vinyl record onto the felt mat on the platter.
- Kontu handiz kendu boligrafoaren babeslea kartutxotik.
- Altxatu besoa altxatzeko palanka erabiliz.
- Mugitu besoa astiro-astiro diskoaren hasierako ildoaren gainetik.
- Lower the tonearm using the tonearm lift lever. The stylus will gently descend onto the record, and playback will begin.
- To stop playback, lift the tonearm using the lever and return it to its rest.
Figure 5: Tonearm and Ortofon OM 10 cartridge.
Figure 6: Ortofon OM 10 cartridge detail.
3. Bluetooth konexioa
The T1 Evo Phono Turntable supports Bluetooth connectivity for wireless audio streaming to compatible Bluetooth speakers or headphones. Refer to your Bluetooth device's manual for pairing instructions. The turntable will automatically attempt to connect to previously paired devices when powered on.
Mantentzea
1. Biragailuaren garbiketa
- Wipe the plinth and dust cover with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
- For the acrylic dust cover, use a specialized acrylic cleaner to prevent scratches.
2. Arkatzaren zaintza
- Regularly inspect the stylus for dust and debris.
- Use a soft stylus brush, brushing gently from back to front, to remove any accumulated particles.
- Replace the stylus when sound quality degrades or after approximately 1,000 hours of playback.
Arazoak konpontzea
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Soinurik ez edo soinu oso baxua | Incorrect input selection on amplifier; loose cables; volume too low. | Ziurtatu amplifier input matches turntable connection (e.g., Line In); check all cable connections; increase volume. |
| Burrunba soinua | Ground wire not connected; interference from other electronics. | Connect the ground wire securely; move turntable away from other electronic devices. |
| Soinua saltoka edo distortsionatuta | Dirty or worn stylus; record is dirty or damaged; turntable not level. | Clean the stylus; clean the record; ensure turntable is on a level surface; replace stylus if worn. |
| Platera ez da biratzen | Power not connected; power switch off. | Check power connection; ensure power switch is in the 'On' position. |
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Produktuaren neurriak | 13.19 x 16.34 x 3.94 hazbete |
| Elementuaren pisua | 14.92 kilo |
| ASIN | B0DHTXH32G |
| Elementuaren eredu-zenbakia | T1 Evo with Preamp |
| Fabrikatzailea | Proiektua |
| Marka | Proiektua |
| Konektibitate Teknologia | Kableatua |
| Biraketa-abiadura maximoa | 45 RPM |
| Ezaugarri Berezia | Abiadura erregulagarria |
| Estiloa | Aurre integratuaamp |
| Kolorea | Satin zuria |
| Ereduaren izena | T1 Evo with Preamp |
| Seinaleen eta zarataren arteko erlazioa | 70 dB |
| Eskuragarri dagoen lehen data | 24ko irailaren 2024a |
Bermea eta Laguntza
Bermearen informazioa
This Pro-Ject T1 Evo Phono Turntable comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms, conditions, and duration. Retain your proof of purchase for warranty claims.
Bezeroarentzako Arreta
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact Pro-Ject customer support. Visit the official Pro-Ject webharremanetarako datuak eta baliabide gehigarriak lortzeko webgunea.
Note: Always ensure to use genuine Pro-Ject replacement parts and accessories to maintain product performance and warranty validity.
