YESWELDER FLUX-135 MINI 135Amp 3-in-1 soldagailuaren argibideen eskuliburua

1. Produktua amaitu daview

The YESWELDER FLUX-135 MINI is a versatile 135Amp 3-in-1 welding machine designed for various welding tasks. It supports Flux Core Gasless MIG, Stick, and Lift TIG welding processes. This machine is suitable for both beginners and experienced welders due to its intuitive controls and synergic features.

1. irudia: Aurrealdea view of the YESWELDER FLUX-135 MINI welding machine.

Ezaugarri nagusiak:

• Multi-Process Capability: Supports Flux Core Gasless MIG, Stick, and Lift TIG welding.
• Kontrol Sinergikoa: Automatically matches recommended voltage when adjusting wire feed speed for optimized welding parameters.
• Eragiketa erraza: Intuitive control panel for straightforward adjustment of welding modes, voltage, and current/wire feed speed.
• Diseinu trinkoa: Mini size for portability and convenience.

Figure 2: The 3-in-1 multi-function welding machine illustrating Flux Cored, Lift TIG, and Stick welding capabilities.

2. Segurtasun informazioa

Welding can be hazardous. Always follow safety precautions to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.

Segurtasun-neurri orokorrak:

• Deskarga elektrikoa: Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the welding machine is properly grounded.
• Keak eta gasak: Can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes from the breathing zone and general area.
• Arku izpiak: Begiak eta azala erre ditzake. Soldatzeko kaskoa itzal-iragazki egokiarekin eta babes-arropa erabiliz erabili.
• Sutea eta leherketa: Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
• Zati beroak: Erredura larriak eragin ditzake. Utzi ekipamendua hozten ukitu aurretik.
• Zarata: Zarata gehiegiak entzumena kaltetu dezake. Erabili belarri-babesak.
• Lan eremua: Keep the work area clean, dry, and free from clutter. Ensure adequate lighting.

3. Konfigurazioa eta instalazioa

3.1 Energia-konexioa

Connect the welder to a standard 110V AC power outlet. Ensure the power source is capable of providing sufficient current for the welding operations.

3.2 Welding Wire Installation (Flux Core MIG)

1. Open the wire feeder compartment.
2. Place a 2LB (4-inch spool diameter) welding wire spool onto the spindle. The FLUX-135 MINI is compatible with .030"/.08mm flux cored wire.
3. Thread the wire through the guide tube and into the drive roller mechanism.
4. Close the drive roller tension arm and adjust the tension appropriately.
5. Feed the wire through the MIG torch liner until it exits the nozzle.

Figure 3: Installation of a 2LB gasless flux cored welding wire spool.

3.3 Electrode/Torch Connections

• Soldadura MIG: The MIG torch is typically pre-connected. Ensure the ground clamp is securely attached to the workpiece.
• Stick Welding: Connect the electrode holder to the positive (+) terminal and the ground clamp to the negative (-) terminal for most common electrodes. Refer to electrode manufacturer specifications.
• TIG soldadura igogailua: An additional Lift TIG torch (not included) is required. Connect the TIG torch to the negative (-) terminal and the ground clamp (+) terminal positibora.

4. Funtzionamendu-argibideak

4.1 Kontrol-panela amaituview

The FLUX-135 MINI features a simple and intuitive control panel. It includes a digital display, mode selection knob, and adjustment knobs for voltage/current and wire feed speed.

4. irudia: Xehetasuna view of the control panel, highlighting synergic control and efficiency.

4.2 Modu hautaketa

Use the mode selection knob to choose between Flux MIG, Stick, or Lift TIG welding processes.

4.3 Synergic Control and Parameter Adjustment

The synergic control feature simplifies parameter setting. When operating in Flux MIG mode, adjusting the wire feed speed knob will automatically suggest the corresponding voltage for optimal welding performance. For Stick and Lift TIG modes, the knobs will adjust current (amparoa).

4.4 Welding Processes

• Flux Core Gasless MIG Welding:
  This mode uses flux-cored wire, eliminating the need for external shielding gas. Select Flux MIG mode, set your wire feed speed (voltage will adjust synergically), and begin welding. Ensure proper stick-out and travel speed for best results.
• Stick Welding (SMAW):
  Select Stick mode. Insert the appropriate electrode into the electrode holder. Adjust the current (amperage) based on the electrode type and material thickness. Maintain a consistent arc length and travel speed.
• Lift TIG Welding (GTAW):
  Note: Requires an additional Lift TIG torch (not included). Select Lift TIG mode. Connect the TIG torch and ground clamp as described in Section 3.3. Use ER70S-6 mild steel TIG welding rods for fabrication of mild steel. Initiate the arc by gently touching the tungsten electrode to the workpiece and then lifting it slightly. Adjust current (amperage) as needed.
  

  Figure 5: YESWELDER ER70S-6 mild steel TIG welding rods.
  

  Figure 6: ER70S-6 TIG welding rods available in 1/16", 3/32", and 1/8" diameters, all 16" long.

  

  Figure 7: An operator performing Lift TIG welding.

5. Mantentzea

Mantentze-lan erregularrak zure soldadura-makinaren iraupena eta errendimendu optimoa bermatzen ditu.

5.1 Garbiketa

• Periodically clean the exterior of the machine with a dry, soft cloth.
• Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.

5.2 Kable eta konexioen ikuskapena

• Regularly inspect all welding cables, torch leads, and ground clamps for signs of wear, damage, or loose connections. Replace damaged components immediately.
• Ziurtatu konexio elektriko guztiak estu eta seguru daudela.

5.3 Wire Feeder Mantentzea (MIG)

• Clean the drive rollers and wire guide tubes to prevent wire feeding issues.
• Check the MIG torch liner for blockages or wear. Replace if necessary.

6. Arazoak

Atal honek aurki ditzakezun arazo ohikoenei irtenbideak eskaintzen ditu.

Hemen zerrendatu ez diren arazorik baduzu edo arazoak jarraitzen badu, jarri harremanetan bezeroarentzako arreta-zerbitzuarekin.

7. Zehaztapenak

Technical specifications for the YESWELDER FLUX-135 MINI.

8. Bermearen informazioa

This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official YESWELDER webwebgunean bermearen baldintza zehatzak ikusteko. Gorde erosketaren frogagiria bermearen erreklamazioetarako.

9. Bezeroarentzako arreta

For technical assistance, spare parts, or any inquiries regarding your YESWELDER FLUX-135 MINI, please contact YESWELDER customer support. You can typically find contact information on the official YESWELDER webgunea edo zure dendariaren bidez.

Sareko baliabideak: Bisitatu YESWELDER Store on Amazon produktuari buruzko informazioa eta laguntza lortzeko.