Montech Titan PLA 850W ATX jokoetarako elikatze-iturriaren erabiltzailearen eskuliburua

1. Sarrera

Thank you for choosing the Montech Titan PLA 850W ATX Gaming Power Supply. This manual provides essential information for the proper installation, operation, and maintenance of your power supply unit (PSU). Please read this manual thoroughly before installation and retain it for future reference.

2. Segurtasun informazioa

WARNING: Improper installation or use can lead to equipment damage, electric shock, or serious injury. Always follow these safety guidelines:

• Ensure the power supply is disconnected from the AC power outlet before installation, removal, or any maintenance.
• This product is designed for indoor use only. Do not expose it to moisture, high temperatures, or dusty environments.
• Ez ireki PSU casing. Bolumen handiatages are present inside, and opening the unit will void the warranty.
• Use only the modular cables provided with this power supply. Using third-party cables may cause damage to the PSU or connected components.
• Ensure proper grounding for your computer system.
• Instalazio-urratsen bat zalantzan jartzen baduzu, kontsultatu teknikari kualifikatu bati.

3. Paketearen edukia

Egiaztatu elementu guztiak zure paketean daudela:

• Montech Titan PLA 850W Power Supply Unit
• Modular Cable Set (including ATX 24-pin, CPU 8-pin, PCIe 6+2-pin, SATA, Peripheral 4-pin)
• AC korronte kablea
• Muntatzeko Torlojuak
• Kable Loturak
• Erabiltzailearen eskuliburua

4. Produktua amaitu daview

The Montech Titan PLA 850W is a high-performance, fully modular power supply designed for gaming and high-end PC systems. It features 80 Plus Platinum and Cybenetics Platinum certifications for exceptional efficiency, ATX 3.1 and PCIe 5.1 readiness for next-generation components, and a silent 135mm Fluid Dynamic Bearing (FDB) fan with a Zero RPM mode.

Irudia: Angelua view of the Montech Titan PLA 850W Power Supply, showcasing its white chassis and top fan grill.

Irudia: Gainetikview of key features including 80 PLUS Platinum, Cybenetics A+ certification, ATX 3.1 & PCIe 5.1 readiness, silent performance, premium build, and ultimate protection.

4.1 Ezaugarri nagusiak

• 80 PLUS Platinum & Cybenetics Platinum Certified: Achieves up to 90% efficiency, reducing heat and operating costs.
• ATX 3.1 eta PCIe 5.1rako prest: Fully compliant with the latest power standards for modern GPUs, supporting 2x total power excursion and 3x GPU power excursion.
• Diseinu guztiz modularra: Allows for clean cable management and improved airflow within your PC case.
• 135 mm-ko FDB haizagailu isila zero RPM moduarekin: Ensures quiet operation under low to moderate loads by stopping the fan.
• %100 japoniar 105 °C-ko kondentsadoreak: Provides enhanced durability, stability, and reliability.
• Babes integralak: Includes OVP, OPP, SCP, OCP, UVP, OTP for system safety.

Image: Diagram illustrating ATX 3.1 and PCIe 5.1 readiness, showing support for power and GPU excursions and hold time above 21ms.

Image: Logos for 80 PLUS Platinum and Cybenetics Platinum certifications, indicating high power efficiency.

Irudia: Gertuko planoa view of internal Japanese 105°C capacitors, highlighting premium component quality.

Image: Cybenetics A+ certification logo alongside a view of the 135mm FDB fan, emphasizing silent operation.

5. Konfiguratzeko argibideak

5.1 Instalazioaren aurreko kontrol zerrenda

• Ensure your computer case is compatible with ATX power supplies.
• Gather all necessary tools: screwdriver, cable ties (included).
• Unpack the PSU and all modular cables.

5.2 Instalazio fisikoa

1. Turn off your computer and disconnect the AC power cord from the wall outlet.
2. Ireki zure ordenagailuaren kaxa.
3. Carefully place the Montech Titan PLA 850W PSU into the designated PSU bay in your computer case. Ensure the fan is facing the correct direction (typically facing down if your case has a bottom vent, or up if it draws air from inside the case).
4. Secure the PSU to the case using the provided mounting screws.

5.3 Kableen konexioak

The Montech Titan PLA 850W is a fully modular power supply, allowing you to connect only the cables you need. Refer to the diagram below for connector types and locations.

Irudia: Atzealdea view of the Montech Titan PLA power supply showing the fully modular cable connection ports, labeled for M/B, CPU/PCI-E, Peripheral-IDE/SATA/Molex, and 12V-2x6.

1. Motherboard (M/B) Power: Connect the 24-pin ATX cable to the PSU and then to your motherboard's 24-pin connector.
2. CPUaren potentzia: Connect the 8-pin (4+4-pin) CPU cable(s) to the PSU and then to your motherboard's CPU power connector(s).
3. PCIe Power: Connect the 6+2-pin PCIe cable(s) to the PSU and then to your graphics card(s). Use separate cables for each high-power GPU connector if possible.
4. SATA potentzia: Connect SATA power cables to the PSU and then to your SSDs, HDDs, or optical drives.
5. Peripheral (Molex) Power: Connect peripheral cables to the PSU and then to any components requiring Molex connectors.
6. Once all necessary cables are connected, use cable ties to manage them neatly for better airflow and aesthetics.

5.4 Hasierako piztea

1. Ziurtatu konexio guztiak seguruak direla.
2. Itxi ordenagailuaren zorroa.
3. Connect the AC power cord to the PSU's input socket and then to a wall outlet.
4. Flip the power switch on the back of the PSU to the 'ON' (I) position.
5. Piztu ordenagailua.

Image: Rear panel of the Montech Titan PLA 850W Power Supply, showing the AC input, power switch, and input voltage label (100~240VAC).

6. Funtzionamendu-argibideak

6.1 Piztu/Itzaltzea

To power on your system, ensure the PSU switch is in the 'ON' position and press your computer's power button. To power off, shut down your operating system normally. For complete power disconnection, flip the PSU switch to the 'OFF' (O) position and unplug the AC cord.

6.2 Zero RPM modua

The Montech Titan PLA 850W features a Zero RPM mode. In this mode, the PSU fan will remain off under low to moderate loads to provide silent operation. The fan will automatically activate when the load increases to maintain optimal temperatures. This is normal operation and not an indication of a fault.

Irudia: Goitik behera view of the Montech Titan PLA 850W Power Supply fan, visible through the protective grill.

7. Mantentzea

To ensure the longevity and optimal performance of your Montech Titan PLA 850W PSU, follow these maintenance guidelines:

• Hautsa kentzea: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components. Always disconnect the AC power before cleaning.
• Ingurumen-baldintzak: Operate the PSU in a well-ventilated area, away from direct sunlight, heat sources, and excessive humidity.
• Kableen ikuskapena: Occasionally check all modular cable connections to ensure they are secure and free from damage.

8. Arazoak

If you encounter issues with your Montech Titan PLA 850W PSU, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Montech customer support for further assistance.

9. Zehaztapenak

Detailed specifications for the Montech Titan PLA 850W Power Supply:

Image: Rating label of a Montech Titan PLA power supply (750W variant shown), detailing AC input and DC output specifications.

10. Bermea eta Laguntza

The Montech Titan PLA 850W Power Supply is backed by a 10 urteko fabrikatzailearen bermea, covering defects in materials and workmanship under normal use. For warranty claims or technical support, please visit the official Montech webwebgunera edo jarri harremanetan bezeroarentzako arreta-zerbitzuarekin. Gorde erosketaren egiaztagiria bermea balioztatzeko.

For the most up-to-date support information, please refer to the official Montech support channels.