ZIBOO 15B PRO True RMS Digital Multimeter User Manual

1. Segurtasun informazioa

Before using the ZIBOO 15B PRO Digital Multimeter, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or personal injury.

1.1 Segurtasun Jarraibide Orokorrak

• Neurketak egin aurretik, ziurtatu beti multimetroa funtzio eta tarte egokian dagoela.
• Ez erabili multimetroa hondatuta badago edo proba-kableak hondatuta badaude.
• Observe all safety precautions for working with electricity, including wearing appropriate personal protective equipment (PPE).
• Never exceed the maximum input values for any function.
• The device is rated CAT III 600V and CAT II 1000V. Adhere to these ratings for safe operation.
• The multimeter features double fuse protection to prevent damage from overload.

2. Produktua amaitu daview

The ZIBOO 15B PRO True RMS Digital Multimeter is a compact and reliable tool designed for a wide range of electrical testing applications. It offers accurate measurements for AC/DC voltage, AC/DC current, resistance, continuity, diode, capacitance, and duty cycle. Its True RMS capability ensures precise readings for non-sinusoidal waveforms.

1. irudia: Aurrealdea view of the ZIBOO 15B PRO Digital Multimeter, showing the display, rotary dial, and function buttons.

2.1 Ezaugarri nagusiak

• Egiazko RMS: Provides accurate measurements for both sinusoidal and non-sinusoidal AC waveforms.
• 6000 zenbakien pantaila: High-resolution display for precise readings.
• AC / DC boltage: Measures up to 1000V.
• AC/DC korrontea: Measures up to 10A (optional current clamp for up to 600A).
• Resistance, Continuity, Diode, Capacitance, Duty Cycle: Essential functions for comprehensive electrical troubleshooting.
• VFD AC 600V: Variable Frequency Drive measurement capability.
• NCV/LIVE: Kontaktu gabeko boltage and Live Wire Detection with Red LED Flash.
• Datuak gordetzea: Freezes the displayed reading for easier recording.
• Atzeko argia: Bright white backlight for clear visibility in various lighting conditions.
• Babes Casing: Kanpoko c iraunkorraasing for enhanced protection.

Figure 2: Visual representation of the various measurement functions available on the multimeter.

2.2 Zer dago kutxan

• ZIBOO 15B PRO Digital Multimeter
• Multimetroaren proba-kableak (gorria eta beltza)
• Protective Caps for Test Leads
• Erabiltzailearen eskuliburua

Note: AC pliers are an optional accessory and are not included with the standard package.

3. Konfigurazioa

3.1 Bateriaren instalazioa

1. Ziurtatu multimetroa itzalita dagoela.
2. Kokatu bateriaren konpartimendua gailuaren atzealdean.
3. Unscrew the single Phillips #1 screw to open the compartment.
4. Insert three AA 1.5V batteries, observing correct polarity.
5. Jarri bateriaren konpartimenduaren estalkia eta lotu torlojuarekin.

3.2 Proba-kableak konektatzea

1. Sartu proba-kable beltza 'COM' (Komuna) hartunean.
2. Neurketa gehienetarako (bolumentage, resistance, continuity, diode, capacitance, frequency, duty cycle), insert the red test lead into the 'VΩHz' jack.
3. 10A-ra arteko korronte-neurketetarako, sartu proba-kable gorria '10A' konektorean.
4. Milirakoampere (mA) or microampere (µA) measurements, insert the red test lead into the 'µAmA' jack.

Figure 3: The ZIBOO 15B PRO Multimeter with its test leads, showing the connection points.

4. Funtzionamendu-argibideak

4.1 Piztea/Itzaltzea eta pantaila

Turn the rotary dial from 'OFF' to any desired function to power on the multimeter. To power off, turn the dial back to 'OFF'. The device features an automatic power-off function to conserve battery life. Press the LED button to activate or deactivate the display backlight for improved visibility.

4.2 Neurketa funtzioak

Rotate the dial to select the desired measurement function. Use the MODUA button to toggle between different sub-functions within a dial position (e.g., AC/DC voltage, NCV/LIVE).

1. liburukiatage Neurketa (AC/DC):
   Set the dial to 'V~' for AC voltage edo 'V=' DC bolumenerakotage. Connect the test leads in parallel to the circuit or component being measured. The display will show the voltagirakurketa.
2. Korrontearen neurketa (AC/DC):
   Set the dial to 'A~' for AC current or 'A=' for DC current. Ensure the red test lead is in the appropriate current jack (10A or µAmA). Connect the multimeter in series with the circuit.
3. Erresistentziaren neurketa (Ω):
   Set the dial to 'Ω'. Connect the test leads across the component. Ensure the circuit is de-energized before measuring resistance.
4. Jarraipen proba ():
   Set the dial to 'Ω' and press MODUA until the continuity icon appears. A buzzer will sound and a green LED will flash if continuity is detected (low resistance).
5. Diodoaren proba ():
   Set the dial to 'Ω' and press MODUA until the diode icon appears. Connect the test leads across the diode.
6. Kapazitantziaren neurketa (F):
   Set the dial to 'F'. Connect the test leads across the capacitor. Ensure the capacitor is discharged before measurement.
7. NCV (Kontakturik gabeko boltage) / LIVE (Live Wire Detection):
   Set the dial to 'NCV LIVE'. The multimeter will detect AC voltage without direct contact. 'L' indicates a live wire with voltage, accompanied by a red LED flash and buzzer. 'EF' indicates non-contact detection.

Figure 4: The multimeter's NCV function detecting voltage near an electrical outlet, indicated by 'EF' on the display.

4.3 Funtzio bereziak

• EUTSI: Sakatu EUTSI botoia pantailan uneko irakurketa izozteko. Sakatu berriro askatzeko.
• MIN / MAX: Sakatu MIN / MAX button to record the minimum and maximum values during a measurement session. Press again to cycle through MIN, MAX, and current readings.
• GAMA: Sakatu RANGE button to switch between auto-ranging and manual ranging.

5. Mantentzea

5.1 Garbiketa

Garbitu multimetroaren casiniragarkiarekin gamp cloth and mild detergent. Do not use abrasive cleaners or solvents. Ensure the device is completely dry before use.

5.2 Bateria ordezkatzea

When the battery indicator appears on the display, replace the batteries as described in Section 3.1. Always use three new AA 1.5V batteries.

5.3 Fusiblearen ordezkapena

The multimeter is equipped with internal fuses for protection. If a current measurement function stops working, the fuse may need replacement. To access the fuses, open the battery compartment (Section 3.1). The fuses are located inside. Replace with fuses of the correct type and rating (e.g., 10A/1000V and 500mA/1000V).

5. irudia: Barnekoa view highlighting the double fuse protection for safety and durability.

5.4 Test Lead Care

The test leads come with protective caps. Use these caps to protect the sharp tips when not in use or when measuring in situations where only a short tip is required. This helps prevent damage to the probes and ensures safety.

6. Arazoak

If you encounter issues with your ZIBOO 15B PRO Digital Multimeter, refer to the following common troubleshooting steps:

• Pantailarik ez/Pantaila ahula: Check battery levels and replace if necessary. Ensure the multimeter is powered on.
• Irakurketa okerrak: Verify the test leads are correctly inserted into the appropriate jacks for the selected function. Ensure the rotary dial is set to the correct measurement type and range. Check for damaged test leads.
• Current Function Not Working: The internal fuse for current measurement may have blown due to an overload. Replace the fuse as described in Section 5.3.
• Jarraitutasun-buzzerrak ez du jotzen: Ensure the multimeter is in continuity mode. Check for open circuits or high resistance.

For persistent issues, consult the manufacturer's support resources.

7. Zehaztapenak

Note: Accuracy specifications are typical values and may vary slightly.

Figure 6: A detailed table outlining the technical specifications for the ZIBOO 15B PRO multimeter.

8. Bermea eta Laguntza

For warranty information and customer support, please refer to the official ZIBOO website or contact the seller directly through the platform where the product was purchased. Standard return policies typically apply (e.g., 30-day return window).