GOOLOO GP2000 Abiarazle eta AP150 Pneumatikoen Puzgailuaren Erabiltzaile Eskuliburua

1. Sarrera

Thank you for choosing the GOOLOO GP2000 Jump Starter and AP150 Tire Inflator. This combined unit provides essential tools for vehicle emergencies, offering both powerful jump-starting capabilities and efficient tire inflation. This manual provides detailed instructions for the safe operation, maintenance, and troubleshooting of your device. Please read it thoroughly before first use and retain it for future reference.

Image: The GOOLOO GP2000 Jump Starter (right) and AP150 Tire Inflator (left) side-by-side, showcasing both components of the product.

2. Segurtasun neurri garrantzitsuak

Always observe the following safety guidelines to prevent injury or damage to the device and property:

• Irakurri argibide guztiak produktua erabili aurretik.
• Ez jarri gailua euria edo hezetasunera.
• Ez erabili gailua erori edo hondatu bada.
• Mantendu haurren eskura.
• Ziurtatu aireztapen egokia erabiltzen eta kargatzen ari den bitartean.
• Ez desmuntatu unitatea. Mantendu konponketa guztiak langile kualifikatuen esku.
• Saihestu zirkuitulaburra abiarazlearen cl-an.amps.
• Do not use the tire inflator for purposes other than inflating tires or specified items.
• The GP2000 Jump Starter features 10 Kinds of Protections including reverse-charge, high and low-temperature, over-current, spark-proof, and short-circuit protection for enhanced safety.

Image: The GOOLOO GP2000 Jump Starter connected to a car battery, illustrating its advanced safety features such as reverse-charge, over-current, and spark-proof protections.

3. Paketearen edukia

Mesedez, egiaztatu elementu guztiak zure paketean daudela:

• For AP150 Tire Inflator:
• 1. Tire Inflator (AP150 unit)
• 2. Aire mahuka
• 3. USB kargatzeko kablea
• 4. Long Tapered Nozzle
• 5. Short Tapered Nozzle
• 6. Presta Balbula egokitzailea
• 7. Ball Needle Adapter
• 8. British Valve Adapter
• 9. Erabiltzailearen eskuliburua
• For GP2000 Jump Starter:
• 1. GP2000 Jump Starter Unit
• 2. Smart Jumper Cables
• 3. USB-C kargatzeko kablea
• 4. Biltegiratzeko kaxa
• 5. Erabiltzailearen eskuliburua

Image: A visual representation of the GOOLOO AP150 Tire Inflator package contents, including the inflator unit, air hose, charging cable, various nozzles, and user manual.

4. Produktua amaitu daview

4.1 GOOLOO GP2000 Abiarazle-abiarazlea

The GP2000 is a powerful portable jump starter designed to start vehicles with dead batteries. It features multiple output ports for charging other devices.

• Abiarazteko ataka: Connects to smart jumper cables.
• USB Output Ports (Output1, Output2): Smartphone-ak, tabletak eta bestelako USB bidez elikatzen diren gailuak kargatzeko.
• USB-C sarrerako ataka: Abiarazle-unitatea kargatzeko.
• LED linterna: Provides illumination with multiple modes (lighting, flashing, SOS).
• Bateriaren adierazle argiak: Show the remaining battery level.

Image: The GOOLOO GP2000 Jump Starter displaying its various ports, including two USB output ports and one USB-C input port, indicating its capability to charge external devices.

4.2 GOOLOO AP150 Tire Inflator

The AP150 is a portable, cordless tire inflator with a digital display and multiple inflation modes.

• LED pantaila digitala: Shows real-time and preset tire pressure, battery level, and selected mode.
• Kontrol-botoiak: Power, mode selection, and pressure adjustment buttons.
• Aire hodiaren konexioa: Point for attaching the air hose.
• USB irteerako ataka: Functions as a power bank for charging small electronic devices.
• LED argia: Integrated light for use in low-light conditions, with normal and SOS modes.

Image: The GOOLOO AP150 Tire Inflator demonstrating its versatility as a power bank for charging a smartphone and its built-in LED light for nighttime use or emergencies.

5. Gailua kargatzea

It is recommended to fully charge both the GP2000 Jump Starter and AP150 Tire Inflator before first use.

5.1 GP2000 abiarazlea kargatzea

1. Connect the provided USB-C charging cable to the USB-C input port on the GP2000 unit.
2. Konektatu USB-C kablearen beste muturra USB hormako egokitzaile batera (ez dago barne) edo USB ataka elikagarri batera.
3. The battery indicator lights will illuminate and flash during charging. All lights will be solid when fully charged.

5.2 Charging the AP150 Tire Inflator

1. Connect the provided USB charging cable to the charging port on the AP150 unit.
2. Connect the other end of the USB cable to a USB wall adapter (not included) or a powered USB port.
3. The digital display will show the charging status. The battery icon will indicate a full charge when complete.

6. Operating the GP2000 Jump Starter

Follow these steps to safely jump start your vehicle:

1. Ensure the GP2000 unit is sufficiently charged (at least 50%).
2. Connect the blue end of the smart jumper cables into the jump start port on the GP2000 unit.
3. Erantsi cl gorriaamp (+) to the positive terminal of the vehicle's battery.
4. Erantsi cl beltzaamp (-) to the negative terminal of the vehicle's battery.
5. Check the indicator light on the smart jumper cable. A solid green light indicates a safe connection. If it's red or flashing, check connections or refer to troubleshooting.
6. Hasi zure ibilgailua.
7. Once the vehicle starts, immediately remove the jumper cables from the vehicle battery, then disconnect from the GP2000 unit.

Image: The GOOLOO GP2000 Jump Starter with its smart clamps connected to a car battery, illustrating its capability to jump start various vehicles including cars, trucks, motorcycles, and boats.

Image: A close-up comparison highlighting the quality metal construction and copper material of the GOOLOO jump starter clamps, emphasizing their sturdy and reliable design.

7. Operating the AP150 Tire Inflator

The AP150 offers quick and easy inflation with preset modes and auto shut-off.

7.1 Oinarrizko inflazio-urratsak

1. Connect the right nozzle: Screw the air hose onto the AP150 unit and attach the appropriate nozzle to the item you wish to inflate.
2. Piztu: Hold the power button for 3 seconds to turn on the tire inflator. The digital display will light up.
3. Choose Mode & Set Pressure: Press the mode button to cycle through the 5 inflation modes (SUV, car, bicycle, ball, and customizable). Use the '+' and '-' buttons to adjust the preset pressure value. The display shows both real-time and preset pressure.
4. Hasi inflazioa: Sakatu berriro pizteko botoia puzten hasteko. Puzgailua automatikoki geldituko da aurrez ezarritako presioa lortzen denean.
5. Deskonektatu: Remove the nozzle and air hose.

Image: A four-step visual guide demonstrating the easy operation of the GOOLOO AP150 Tire Inflator: 1. Connect nozzle, 2. Power on, 3. Choose mode & set pressure, 4. Start inflation until auto-stop.

7.2 Inflation Modes and Typical Pressures

The AP150 offers specific modes for common inflation needs:

• Auto modua: Default 36 PSI (adjustable). Inflates a standard car tire (205/55/R14) from 25 PSI to 36 PSI in approximately 1 minute.
• Motozikleta modua: Default 35 PSI (adjustable).
• Bizikleta modua: Default 60 PSI (adjustable).
• Pilota modua: Default 8 PSI (adjustable).
• Customizable Mode: Allows manual setting of desired pressure.

Image: The GOOLOO AP150 Tire Inflator displaying its preset modes for car, motorcycle, bicycle, and ball inflation, along with the customizable option, and highlighting its auto shut-off feature.

Image: The GOOLOO AP150 Tire Inflator connected to a large vehicle tire, demonstrating its cordless fast inflation capability up to 150 PSI, with an example of inflating a 205/55 R16 tire in under 1 minute.

8. Mantentzea

Mantentze egokiak zure GOOLOO gailuen iraupena eta errendimendu optimoa bermatzen ditu.

• Garbiketa: Garbitu unitateak zapi leun batekin,amp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.
• Biltegiratzea: Store both units in a cool, dry place, away from direct sunlight and extreme temperatures.
• Bateria zaintzea: For optimal battery life, charge the units at least once every three months, even if not in use. Avoid fully discharging the batteries for extended periods.
• Osagarrien egiaztapena: Periodically inspect the jumper cables and air hose for any signs of wear or damage. Replace if necessary.

9. Arazoak

Arazoak badituzu, jo ezazu honako arazo eta irtenbide ohikoenei:

10. Zehaztapenak

11. Bermea eta Laguntza

GOOLOO products are designed for reliability and performance. For warranty information, technical support, or any inquiries regarding your GP2000 Jump Starter and AP150 Tire Inflator, please contact GOOLOO customer service through their official webgunea edo zure produktuaren ontzian emandako harremanetarako informazioa.

Please visit the official GOOLOO store for more information: GOOLOO denda Amazonen