Baseus Super Energy Pro+ Jump Starter Powerbank User Manual

1. Sarrera

The Baseus Super Energy Pro+ Jump Starter Powerbank is a versatile device designed to jump-start 12V vehicles and serve as a portable power bank for electronic devices. It features a 12,000mAh battery capacity and a peak current of 1200A, suitable for various vehicle types.

Image 1.1: Baseus Super Energy Pro+ Jump Starter Powerbank shown with different vehicle types, illustrating its broad compatibility.

2. Produktua amaitu daview eta Ezaugarriak

This device combines the functionality of a car jump starter and a power bank. Key features include:

• Goi-korronte gailurra: Provides up to 1200A peak current for effective vehicle starting.
• Bateriaren edukiera: 12,000mAh / 44.4Wh for multiple uses.
• Funtzio anitzekoa: Serves as both a jump starter and a portable power bank.
• Bistaratze digitala: Bateriaren karga-maila adierazten du.
• Larrialdiko LED argia: Features multiple lighting modes for safety.
• Alderantzizko polaritatearen babesa: Integrated safety mechanism to prevent damage from incorrect connections.
• Bateragarritasun zabala: Suitable for 12V vehicles with engines up to 8L (diesel) or 3.5L (gasoline).

Image 2.1: The jump starter displaying its digital battery percentage and highlighting its 1200A peak current capability.

Image 2.2: Visual representation of the 1200A high current output, powered by a 3-battery system.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• 1x Baseus Super Energy Pro+ Jump Starter Powerbank
• 1x Power Cable (USB-C)
• 1x Car Cable (EC5/Clamps)

4. Getting Started: Charging the Device

Before initial use, fully charge the jump starter. It is recommended to keep the device charged above 50% for optimal performance.

1. Connect the provided USB-C power cable to the jump starter's input port.
2. Konektatu USB-C kablearen beste muturra USB elikatze-egokitzaile bateragarri batera (ez dago barne).
3. The digital display will show the charging progress. Charge until the display indicates 100%.

4.1 irudia: Albokoa view of the jump starter, illustrating the various ports for charging and output.

5. Funtzionamendu-argibideak

5.1. Ibilgailua martxan jartzea laguntzaz

Ensure the jump starter is sufficiently charged before attempting to start a vehicle.

1. Connect the Smart Ignition Terminals: Insert the smart ignition terminals (EC5 connector) into the jump starter's EC5 interface. The indicator lights on the terminals will flash red and green, indicating readiness.
2. Attach to Car Battery: Open the car's hood. Connect the red clamp autoko bateriaren terminal positibora (+) eta cl beltzaraamp (-) terminal negatibora.
3. Hasi autoa: Return to the vehicle and start the engine.
4. Deskonektatu: Once the car starts, immediately disconnect the jump starter from the car battery. First remove the clamps from the battery terminals, then disconnect the smart ignition terminals from the jump starter.

Image 5.1: A user connecting the jump starter clamps to a car battery, demonstrating the correct procedure.

5.2. Power Bank gisa erabiltzea

The jump starter can charge mobile phones, tablets, and other USB-powered devices.

• Connect your device's charging cable to one of the USB-A output ports on the jump starter.
• Abiarazleak automatikoki hasiko da zure gailua kargatzen.

5.3. Using the Emergency LED Light

The built-in LED light offers multiple modes for various situations.

• Press and hold the power button to turn on the emergency lighting mode.
• Press the power button again to cycle through SOS mode and Strobing mode.
• Press and hold the power button again to turn off the light.

Image 5.2: The jump starter's emergency LED light illuminating an engine bay, showing its utility in low-light conditions.

6. Segurtasun-neurriak

• Do not short-circuit the jump starter.
• Do not expose the device to extreme temperatures (above 60°C or below -20°C).
• Mantendu haurren eskura.
• Ez desmuntatu edo aldatu gailua.
• Ensure correct polarity when connecting to a car battery. The smart clamps feature reverse polarity protection, which will trigger an alarm if connected incorrectly.
• Disconnect the jump starter immediately after the vehicle starts.

Image 6.1: Close-up of the smart clamps, emphasizing the built-in reverse polarity protection feature.

7. Mantentzea eta biltegiratzea

• Gorde abiarazlea leku fresko eta lehor batean, eguzki-argitik urrun.
• Charge the device every 3-6 months if not in regular use to maintain battery health.
• Garbitu gailua zapi leun eta lehor batekin. Ez erabili produktu kimiko gogorrik edo material urratzailerik.

8. Arazoak

• Gailua ez da pizten: Ensure the device is charged. If the battery level is very low, it may require a few minutes of charging before it can power on.
• Ibilgailua ez da martxan jartzen: Egiaztatu clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the jump starter has sufficient charge. The vehicle's battery may be severely discharged or damaged, requiring professional assistance.
• Reverse polarity alarm: If the smart clamps emit a buzzing sound, disconnect them immediately and re-attach them to the correct battery terminals.
• Charging slow or not at all: Ensure the charging cable and adapter are functioning correctly.

9. Zehaztapen Teknikoak

Image 9.1: Display of various international certifications for the product, ensuring compliance and safety standards.

10. Bermea eta Laguntza

For warranty information or technical support, please refer to the official Baseus website or contact your local retailer. Keep your purchase receipt for warranty claims.