LAUNCH X431 CRP919 EV Scanner User Manual

1. Sarrera

The LAUNCH X431 CRP919 EV is a state-of-the-art diagnostic scan tool designed for both traditional internal combustion engine (ICE) vehicles and the rapidly growing new energy vehicle (NEV) market, including hybrid and electric vehicles (EVs). This intelligent scanner provides comprehensive system diagnostics, advanced service functions, and bidirectional control capabilities, making it an essential tool for professional technicians and advanced DIY enthusiasts.

Equipped with an Android 10.0 operating system, a 7.0-inch touch screen, and robust hardware, the CRP919 EV offers fast, efficient, and accurate vehicle diagnostics. It supports modern communication protocols like CANFD and DOIP, ensuring broad compatibility with vehicles up to the latest models.

Figure 1.1: LAUNCH X431 CRP919 EV Scanner and its protective carrying case.

2. Segurtasun informazioa

Always observe the following safety precautions when operating the LAUNCH X431 CRP919 EV scanner to prevent personal injury or damage to the device or vehicle:

• Ensure the vehicle's ignition is off before connecting or disconnecting the diagnostic cable.
• Do not operate the scanner in wet conditions or with wet hands.
• Mantendu gailua eremu magnetiko indartsuetatik eta tenperatura altuetatik urrun.
• Always refer to the vehicle manufacturer's service manual for specific diagnostic procedures and safety warnings, especially when working with high-voltage EV systems.
• Use appropriate personal protective equipment (PPE) when performing vehicle diagnostics.
• Do not attempt to disassemble or modify the scanner. Refer all servicing to authorized personnel.

3. Zer dago kutxan

Paketea irekitzean, egiaztatu osagai guztiak daudela:

• LAUNCH X431 CRP919 EV Main Unit
• Main Diagnostic Cables
• C motako kargagailua
• Power Adaptors (various regional types)
• Erabiltzailearen eskuliburua
• Hasierako gida azkarra
• Babes-estalkia

Figure 3.1: Included components with the LAUNCH X431 CRP919 EV scanner.

4. Konfigurazioa

4.1 Hasierako karga

Before first use, fully charge the CRP919 EV scanner. Connect the Type-C charger to the device's charging port and plug it into a power outlet. The charging indicator will show the charging status. A full charge can provide up to 15 hours or more of battery life.

4.2 Piztu/Itzaltzea

• Pizteko: Press and hold the Power button located on the side of the device until the screen illuminates.
• Itzaltzeko: Press and hold the Power button until a power-off menu appears. Select "Power Off" and confirm.

4.3 Sareko konexioa

For software updates, online feedback, and cloud services, connect the device to a Wi-Fi network:

1. From the main menu, tap "Settings".
2. Hautatu "Wi-Fi" eta aktibatu.
3. Aukeratu nahi duzun Wi-Fi sarea zerrendatik eta idatzi pasahitza eskatzen bazaizu.
4. Confirm connection. The device supports 2.4GHz and 5GHz dual-band Wi-Fi for faster transmission.

4.4 Software eguneraketak

Regular software updates are crucial for optimal performance, new vehicle coverage, and bug fixes. The CRP919 EV offers 2 years of free updates.

1. Ensure the device is connected to Wi-Fi.
2. From the main menu, tap "Software Update".
3. The system will check for available updates. Follow the on-screen prompts to download and install them.

Figure 4.1: Software update interface and hardware optimization.

5. Funtzionamendu-argibideak

The LAUNCH X431 CRP919 EV provides a wide range of diagnostic and service functions. Below are key operational aspects:

5.1 Ibilgailuarekin konektatzea

1. Locate the vehicle's OBD-II diagnostic port (usually under the dashboard).
2. Connect the main diagnostic cable to the CRP919 EV and then to the vehicle's OBD-II port.
3. Jarri ibilgailuaren piztea "ON" posizioan (motorra itzalita).
4. On the scanner, select "Local Diagnose" to begin communication.

5.2 Full System Diagnostics (EV & ICE)

This function allows you to scan all available electronic control units (ECUs) in the vehicle, including engine, transmission, ABS, SRS, and specific EV high-voltage sistemak.

• Eskaneatu automatikoa 2.0: The device features an intelligent Auto VIN function that automatically identifies the vehicle's VIN for quick system access.
• Irakurri/Garbitu kodeak: Retrieve diagnostic trouble codes (DTCs) and clear them after repairs.
• Datu-jario zuzena: View real-time data parameters from various sensors and components in text, graph, or multi-in-one formats.
• EV System Diagnostics: Specifically for EVs, perform battery pack analysis and high-voltage system diagnostics. This includes reading/clearing codes, performing HV parts replacement, and generating HV system diagnostic reports.

5.1 Irudia: Gainetikview of All System Diagnose capabilities.

5.3 Kontrol bidirekzionala (proba aktiboa)

Bidirectional control allows the scanner to send commands to vehicle ECUs to perform specific tests and functions, such as activating solenoids, relays, or motors, to verify system integrity without using the vehicle's controls.

• Access this function from the "Active Test" menu.
• Common tests include activating fuel pumps, cycling ABS solenoids, testing window motors, or operating cooling fans.
• This feature helps in quickly locating faulty components.

Figure 5.2: Bidirectional control functionality for component testing.

5.4 43+ Zerbitzu Funtzio

The CRP919 EV supports over 43 common maintenance and reset functions, accelerating repair processes.

• Olioaren berrezarpena: Berrezarri olioaren bizitza-sistema olio-aldaketa baten ondoren.
• EPB Berrezarri: Reset the electronic parking brake after brake pad replacement.
• SAS Berrezarri: Kalibratu direkzio-angeluaren sentsorea.
• BMS Berrezarri: Register new battery and clear fault codes.
• Throttle Reset: Relearn throttle body position.
• ABS odoljarioa: Egin ABS balaztak husteko prozedurak.
• TPMS berrezarri: Berrezarri pneumatikoen presioaren kontrol sistema.
• And many more, including Injector Coding, Gear Reset, DPF Regeneration, etc.

5.3. irudia: Adibamples of 43+ service functions available.

5.5 ECUren kodeketa

ECU Coding allows for customization of vehicle settings, module matching, unlocking hidden functions, and module retrofitting. This advanced function requires careful operation and knowledge of vehicle systems.

5.6 CANFD & DOIP Protocols

The CRP919 EV supports the latest CANFD and DOIP communication protocols, ensuring compatibility with newer vehicle models (up to 2024/2025) that utilize these advanced network architectures.

5.7 FCA AutoAuth

For FCA (Fiat Chrysler Automobiles) vehicles, the scanner supports FCA AutoAuth, allowing secure access to protected diagnostic functions on these vehicles.

Figure 5.4: Global compatibility and protocol support.

5.8 Ezaugarri gehigarriak

• WiFi Print: Directly print diagnostic reports via Wi-Fi.
• Cloud Health Report: Generate and store vehicle health reports in the cloud for easy access and sharing.
• Lineako iritzia: Submit feedback or issues directly to LAUNCH for support.
• DTCs Library: Built-in database for looking up diagnostic trouble code definitions.
• Remote Diagnose: Potential for remote assistance (requires additional setup/software).

Figure 5.5: User interface and support features.

6. Mantentzea

Proper maintenance ensures the longevity and optimal performance of your LAUNCH X431 CRP919 EV scanner:

• Garbiketa: Erabili zapi leun eta lehor bat gailua garbitzeko. Saihestu garbitzaile edo disolbatzaile urratzaileak.
• Biltegiratzea: Store the scanner in its protective carrying case in a cool, dry place when not in use. Avoid extreme temperatures.
• Bateria zaintzea: For long-term storage, ensure the battery is charged to approximately 50-70% to preserve its lifespan. Recharge periodically if stored for extended periods.
• Software eguneraketak: Regularly update the software to ensure compatibility with new vehicles and access to the latest features and bug fixes.
• Kableen ikuskapena: Periodically inspect diagnostic cables for any signs of wear, damage, or corrosion. Replace damaged cables immediately.

7. Arazoak

This section addresses common issues you might encounter with the CRP919 EV scanner.

8. Zehaztapenak

9. Bermea eta Laguntza

LAUNCH provides comprehensive support for the CRP919 EV scanner:

• Software eguneraketak: Enjoy 2 years of free software updates from the date of activation.
• Laguntza teknikoa: Access 7/24/365 online support for any operational or technical queries.
• Sareko baliabideak: Utilize the built-in "Online Library," "FAQ," and "Online Feedback" features for self-help and direct communication with LAUNCH support.
• Bermea: Refer to your purchase documentation for specific warranty terms and conditions. Typically, LAUNCH products come with a standard manufacturer's warranty covering defects in materials and workmanship.

For further assistance, please visit the official LAUNCH webgunera edo jarri harremanetan zuzenean bezeroarentzako arreta-zerbitzuarekin.