1. Sarrera
This manual provides detailed instructions for the installation, operation, and maintenance of the LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna. This antenna is designed for robust outdoor use, offering comprehensive connectivity for 4G LTE, Wi-Fi, and GNSS applications.
It is engineered to provide reliable signal reception and transmission in various environments, making it suitable for a wide range of compatible cellular routers and devices.
2. Produktua amaitu daview eta Ezaugarriak
The LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna is a high-performance, multi-functional antenna system. It integrates five distinct antenna elements into a single, compact, and durable unit.
Figure 2.1: LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna. This image shows the compact, dome-shaped antenna unit with its five integrated cables, each terminated with a specific connector for LTE, GNSS, and Wi-Fi.
Ezaugarri nagusiak:
- 5-in-1 Combo Antenna: Integrates 2x 4G LTE MIMO, 2x Wi-Fi, and 1x GNSS antenna elements for comprehensive connectivity.
- Outdoor Roof Type: Designed for screw mounting on outdoor surfaces, ideal for vehicles, marine vessels, and fixed installations.
- IP67 Iragazgaitzaren balorazioa: Ensures high resistance to water and dust ingress, providing ultimate reliability in harsh outdoor conditions.
- Global 4G LTE Coverage: Supports a wide frequency range (698~960MHz/1710~2690MHz) for compatibility in most countries. Features 2x SMA Male Connectors for LTE.
- Banda bikoitzeko Wi-Fia: Operates on 2400~2483.5MHz and 4900~5825MHz frequencies. Features 2x RP-SMA Male Connectors for Wi-Fi.
- GNSS antena: Dedicated GNSS (Global Navigation Satellite System) antenna with a frequency range of 1575.42 - 1610 MHz. Features 1x SMA Male Connector.
- Kable integratuak: Each antenna element comes with a 3-meter (10 ft) cable for flexible installation.
- Bateragarritasun zabala: Works with various 4G LTE cellular routers with 2, 3, 4, or 5 antenna interfaces, including Linovision IOT-R32, Inhand IR302/IR305, Teltonika RUT241, RUT240, RUT360, RUT956, and RUTX11.
Figure 2.2: Antenna Interface Diagram. This diagram illustrates the five cable outputs from the antenna, showing the specific connector types for LTE (2x SMA Male), GNSS (1x SMA Male), and Wi-Fi (2x RP-SMA Male).
Figure 2.3: Outdoor Roof SMA Antenna in Rain. This image demonstrates the antenna's IP67 waterproof capability, showing it mounted on a roof during rainfall, highlighting its suitability for outdoor environments.
Figure 2.4: Antenna Application Examples. This collage shows various applications for the antenna, including RVs, transportation (trucks), marine vessels, and construction sites, illustrating its versatility.
Figure 2.5: Rugged Design Features. This image highlights the antenna's robust design, showcasing its wide operating temperature range (-40°F to 185°F), IP67 rating, and ability to withstand 95% relative humidity.
3. Zehaztapenak
| Atributua | Balioa |
|---|---|
| Modelo zenbakia | ANT-4GCombo5 |
| Antena Mota | Combo 5-in-1 (2x 4G LTE MIMO, 2x Wi-Fi, 1x GNSS) |
| 4G LTE Frequency Range | 698~960MHz / 1710~2690MHz |
| 4G LTE Connectors | 2x SMA Male |
| Wi-Fi maiztasun barrutia | 2400~2483.5MHz / 4900~5825MHz |
| Wi-Fi Connectors | 2x RP-SMA Male |
| GNSS maiztasun-tartea | 1575.42 - 1610 MHz |
| GNSS konektorea | 1x SMA Male |
| Kablearen luzera | 3 metro (10 oin) |
| Muntatze Mota | Screw Mount (Outdoor Roof Type) |
| IP balorazioa | IP67 (Uraren eta hautsaren aurkakoa) |
| Funtzionamendu-tenperatura | -40°F eta 185°F (-40°C eta 85°C) |
| Hezetasun erlatiboa | Gehienez %95 |
| Neurriak (diametroa x altuera) | Approx. 4.37" (111mm) x 2.14" (54.5mm) |
| Muntatzeko zuloaren diametroa | 0.98" (25 mm) |
| Elementuaren pisua | 1.21 libra (0.55 kg) |
| Kolorea | Beltza |
Figure 3.1: Antenna Dimensions Diagram. This diagram provides detailed measurements of the antenna unit, including its diameter, height, and the required mounting hole size, along with the cable length.
4. Paketearen edukia
Paketea irekitzean, egiaztatu honako elementu guztiak daudela:
- 1x LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna (Model: ANT-4GCombo5)
- 1x Erabiltzailearen eskuliburua
Figure 4.1: Package Contents. This image displays the main antenna unit as it appears when unboxed, confirming the inclusion of the ANT-4GCombo5 antenna.
Figure 4.2: User Manual. This image shows the included user manual, which contains detailed instructions for the antenna's setup and operation.
5. Konfigurazioa eta instalazioa
The LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna is designed for screw-mount installation on a flat surface, typically a roof or panel. Ensure the mounting location is clear of obstructions and provides optimal line-of-sight for signal reception.
Instalazio urratsak:
- Prestatu muntatzeko gainazala: Choose a flat, stable surface for mounting. Ensure there is sufficient space underneath for cable routing and securing the antenna.
- Zulagailuaren muntaketa-zuloa: Drill a hole with a diameter of approximately 0.98 inches (25mm) at the chosen mounting location. This hole will accommodate the antenna's threaded base.
- Itsasgarria aplikatu (aukerakoa baina gomendagarria): For enhanced sealing and stability, apply the included 3M double-sided tape or a suitable sealant around the drilled hole on the mounting surface.
- Insert Antenna: Carefully insert the antenna's threaded base through the drilled hole from the top side of the mounting surface.
- Secure Antenna: From the underside of the mounting surface, thread the large nut onto the antenna's base and tighten it securely. Ensure the antenna is firmly seated and does not wobble.
- Konektatu kableak: Route the five cables to your compatible cellular router or device. Connect each cable to its corresponding port:
- 2x SMA Male connectors for 4G LTE (Main and Aux)
- 2x RP-SMA Male connectors for Wi-Fi (Main and Aux)
- 1x SMA Male connector for GNSS
Figure 5.1: Antenna Installation Steps. This diagram visually guides the user through the four main steps of installing the antenna: drilling the hole, preparing the base, inserting the antenna, and securing it with the nut.
Note: For optimal performance, ensure the antenna is mounted in a location with a clear view of the sky for GNSS reception and minimal obstructions for LTE/Wi-Fi signals.
6. Funtzionamendu-argibideak
Once the LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna is physically installed and all cables are securely connected to your compatible router or device, its operation is largely passive. The antenna will automatically begin receiving and transmitting signals for 4G LTE, Wi-Fi, and GNSS as soon as the connected device is powered on and configured.
Eragiketa orokorra:
- Bideratzailearen konfigurazioa: Refer to your specific cellular router's user manual for instructions on how to configure its WAN (LTE) and WLAN (Wi-Fi) settings to utilize external antennas. Ensure the router's antenna settings are correctly configured to use the external antenna ports.
- Seinalearen indarraren jarraipena: Most compatible routers provide an interface to monitor signal strength (e.g., RSSI, RSRP, SINR for LTE). Use these metrics to verify optimal antenna placement and connection.
- GNSS Functionality: The GNSS antenna provides location data to compatible devices. Ensure your device's GNSS/GPS features are enabled and configured to receive data from the external antenna.
- Wi-Fi Extension: The Wi-Fi antennas extend the range and improve the performance of your router's Wi-Fi network.
No direct user interaction with the antenna itself is required after installation.
7. Mantentzea
The LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna is designed for minimal maintenance due to its robust construction and IP67 waterproof rating.
- Ohiko ikuskapena: Periodically inspect the antenna and its cables for any visible signs of damage, wear, or loose connections. Ensure the mounting nut remains tight.
- Garbiketa: If the antenna becomes dirty, gently wipe it with a damp cloth. Avoid using harsh chemicals or abrasive materials that could damage the housing.
- Konektoreen zainketa: Ensure the cable connectors remain clean and free of corrosion. If disconnecting, protect the connectors from moisture and dirt.
- Ingurumenari buruzko gogoetak: While the antenna is designed for extreme temperatures and humidity, prolonged exposure to severe conditions (e.g., direct lightning strikes, extreme physical impact) should be avoided if possible.
8. Arazoak
If you experience issues with your LINOVISION 4G LTE MIMO Combo 5-in-1 Antenna, consider the following troubleshooting steps:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Poor 4G LTE Signal | Loose or incorrect LTE cable connection; Antenna obstruction; Router configuration issue; Weak cellular network coverage in the area. |
|
| Wi-Fi seinale ahula | Loose or incorrect Wi-Fi cable connection; Router Wi-Fi settings. |
|
| No GNSS/GPS Signal | Loose or incorrect GNSS cable connection; Antenna obstruction; Device GNSS settings. |
|
| Antenna Not Secure | Mounting nut loose; Incorrect installation. |
|
If problems persist after attempting these solutions, please contact LINOVISION customer support.
9. Bermea eta Laguntza
LINOVISION products are manufactured to high quality standards. For information regarding warranty coverage and technical support, please refer to the warranty card included with your product or visit the official LINOVISION webgunea.
For direct assistance, you may contact LINOVISION customer support through their official channels. Please have your product model number (ANT-4GCombo5) and purchase details ready when contacting support.
Bisita dezakezu LINOVISION Store on Amazon informazio gehiago eta produktuen eguneratzeetarako.
