1. Sarrera
Thank you for choosing the HAARAY Solar Lights Outdoor. This manual provides detailed instructions for the proper installation, operation, and maintenance of your solar security flood lights. Designed for outdoor use, these lights feature a 180° PIR motion sensor, 236 LEDs providing 2500 lumens of brightness, and 360° adjustable illumination. They are built to withstand various weather conditions with an IP65 waterproof rating.
2. Segurtasun informazioa
- Ziurtatu eguzki-panela eguzki-argia zuzenean jasotzen duela kargatze optimoa izan dadin.
- Do not disassemble or modify the product. This may cause damage and void the warranty.
- Produktua sutik edo tenperatura altuetatik urrun eduki.
- Bota bateriak tokiko araudiaren arabera.
- Saihestu begiak LED argiaren eraginpean zuzenean jartzea.
3. Paketearen edukia
Paketeak honako elementu hauek ditu:
- Solar Lights (4 units)
- Mounting Hardware (screws, anchors, wall brackets)
- Ground Stakes (for in-ground installation)
- Argibide eskuliburua (dokumentu hau)
4. Produktuaren ezaugarriak
- Instalazio bikoitzeko aukerak: Can be installed in-ground with stakes or wall-mounted with included hardware.
- 180° PIR Motion Sensor: Equipped with two sensitive PIR motion sensors for enhanced detection of people, animals, and vehicles. Automatically turns off after 20 seconds of no motion.
- 360° Wide Angle Illumination: Features 236 LEDs and 2500 lumens. Adjustable LED panels on both sides allow for a 360° illumination range.
- 3 argiztapen moduak: Offers various lighting modes for different security and energy-saving needs.
- IP65 Iragazgaitza: Constructed with high-quality ABS housing and IP65-certified sealing technology, ensuring resistance to extreme weather conditions.
- Altuera Erregulagarria: Two adjustable mounting heights are provided for varied terrains.
5. Konfigurazioa eta instalazioa
The HAARAY Solar Lights offer flexible installation options. Choose between in-ground or wall-mount setup based on your lighting needs and location.
5.1. Horma-muntatzeko instalazioa
- Select a location on a wall that receives direct sunlight for the solar panel.
- Use the provided mounting hardware (screws and anchors) to secure the wall bracket to the desired surface.
- Attach the solar light unit to the secured wall bracket. Ensure it is firmly in place.
- Adjust the LED panels and the solar panel to achieve the desired illumination angle and optimal sun exposure.

Image: HAARAY Solar Light mounted on a wall, showing dimensions and included mounting hardware.
5.2. In-Ground Installation
- Choose a spot in your yard or garden where the solar panel can receive maximum direct sunlight.
- Assemble the ground stake by connecting the extension pieces if desired for adjustable height.
- Attach the solar light unit to the top of the assembled ground stake.
- Gently push the stake into the ground until it is stable. Avoid forcing it into hard soil to prevent damage.
- Adjust the LED panels and the solar panel for optimal lighting and charging.

Image: HAARAY Solar Light installed in the ground using the provided stakes, illuminating a pathway.
6. Funtzionamendu-argibideak
The HAARAY Solar Lights feature an ON/OFF switch button and multiple lighting modes to suit your preferences. The solar panel charges the internal battery during the day, and the lights activate automatically at dusk.
6.1. Hasierako aktibazioa eta kargatzea
Before first use, ensure the solar panel is exposed to direct sunlight for 6-8 hours to fully charge the battery. The light will automatically turn on at dusk once charged.

Image: Illustration showing the solar light charging during the day and automatically illuminating at dusk.
6.2. Adjusting Illumination Angle
The three LED panels can be manually adjusted up to 360° to direct light where needed, providing wide-angle illumination.

Image: Close-up of the HAARAY Solar Light demonstrating the adjustable LED panels for 360° illumination.
6.3. Argiztapen moduak
The light features 3 distinct operating modes, selectable via the switch button on the unit or the included remote control. The remote control allows for convenient mode switching from a distance.

Image: Diagram illustrating the three lighting modes of the HAARAY Solar Light.
- Mode 1 (Motion Sensor Full Brightness): The light remains off until motion is detected. Upon detection, it illuminates at full brightness (2500 lumens) for approximately 20 seconds, then turns off. This mode is ideal for security lighting.
- Mode 2 (Dusk to Dawn Constant Low Light): The light automatically turns on at a low brightness (approximately 30% of full brightness) at dusk and stays on continuously until dawn, regardless of motion.
- Mode 3 (Dusk to Dawn Dim + Motion Sensor Full Brightness): The light stays on at a dim brightness (approximately 10% of full brightness) from dusk until dawn. When motion is detected, it switches to full brightness for approximately 20 seconds, then returns to dim.
To cycle through the modes, press the ON/OFF/Mode switch button located on the back of the main light unit, or use the corresponding mode buttons on the remote control.
7. Mantentzea
- Eguzki-panela garbia: Garbitu eguzki-panela aldizka zapi leun eta lehor batekinamp hautsa, zikinkeria edo hondakinak kentzeko zapi bat. Panel garbi batek kargatze eraginkorra bermatzen du.
- Egiaztatu konexioak: Periodically inspect all connections to ensure they are secure and free from corrosion.
- Bateria zaintzea: The included D batteries are designed for long-term use. If replacement is ever needed, use compatible rechargeable D batteries.
- Eguraldiaren babesa: While IP65 waterproof, ensure the light is securely mounted to prevent damage during strong winds or heavy storms.
8. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Argia ez da gauez pizten. | Insufficient solar charge; switch is off; sensor malfunction. | Ensure solar panel is in direct sunlight for 6-8 hours. Check if the ON/OFF switch is in the ON position. Test different modes. |
| Argia ahula da edo denbora gutxian bakarrik egoten da piztuta. | Insufficient solar charge; dirty solar panel; old battery. | Clean the solar panel. Relocate the light to a sunnier spot. Allow for a full day's charge. |
| Mugimendu sentsoreak ez du mugimendurik detektatzen. | Obstruction in sensor's path; incorrect mounting height; sensor sensitivity. | Clear any obstructions. Ensure mounting height is within 6-8 feet for optimal detection. Test sensor by walking past it. |
9. Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Marka | HARAY |
| Ereduaren izena | JY2328 |
| Argi iturri mota | LED (236 LED) |
| Distira | 2500 lumen |
| Kolore Tenperatura | 7000 Kelvin |
| Mugimendu-sentsorea | 180°-ko PIR mugimendu-sentsorea |
| Argiztapen Angelua | Up to 360° (adjustable panels) |
| Uraren Erresistentzia Maila | IP65 Iragazgaitza |
| Materiala | Akrilonitrilo Butadieno Estirenoa (ABS) |
| Energia iturria | Solar Powered (1 D battery included) |
| Instalazio mota | Wall Mount, In-Ground Mount |
| Produktuaren neurriak | 11"L x 7.5"Z x 15"A |
| Elementuaren pisua | 4.22 kilo (4ko paketearentzat) |
10. Bermea eta Laguntza
The HAARAY Solar Lights come with an Extended Warranty. For any quality issues or support needs, please contact our customer support team directly. We are committed to providing reasonable solutions and ensuring the best product experience.
For further assistance, please visit the official HAARAY Store: HAARAY Store on Amazon.
