Erabiltzailearen eskuliburua

1. Sarrera

The BAANOOL BN-401A-N is a 4G GPS tracker designed for precise localization and management of vehicles in North American regions. This device offers real-time tracking, historical playback, and various alarm functions, all accessible via a free mobile application and web platform. It is compatible with a wide range of vehicles including cars, motorcycles, trucks, and more.

This manual provides detailed instructions for the installation, operation, and maintenance of your BN-401A-N GPS tracker to ensure optimal performance and longevity.

2. Segurtasun informazioa

Please read and understand all safety instructions before installing and operating the device. Failure to follow these instructions may result in damage to the device, vehicle, or personal injury.

• Ensure the vehicle's power is disconnected before installation to prevent electrical shock or short circuits.
• Install the device in a secure location away from extreme heat, moisture, or direct sunlight.
• Ez saiatu gailua irekitzen edo aldatzen. Mantendu konponketa guztiak langile kualifikatuen esku.
• Use only the provided accessories and wiring harness.
• Egiaztatu liburu zuzenatage (12-24V) before connecting to the vehicle's power supply.

3. Paketearen edukia

Paketea irekitzean, egiaztatu honako elementu guztiak daudela:

• Opari-kutxa
• Relay (if applicable for your specific kit)
• GPS unit (BN-401A-N)
• Arnesa
• Erabiltzailearen eskuliburua

Figure 3.1: Package Contents of BN-401A-N GPS Tracker.

4. Zehaztapenak

The following table outlines the technical specifications of the BN-401A-N GPS Tracker:

Figure 4.1: Device Dimensions and Key Specifications.

5. Konfigurazio gida

5.1 SIM txartelaren instalazioa

The BN-401A-N requires a Nano SIM card (not included) for cellular communication. Ensure the SIM card is active and has data, SMS, and call capabilities. This model is specifically designed for North American 4G networks.

1. Bilatu SIM txartelaren zirrikitua gailuan.
2. Carefully insert the Nano SIM card into the slot with the correct orientation until it clicks into place.
3. Ziurtatu SIM txartela ondo sartuta dagoela.

5.2 Kableatua eta instalazioa

The device should be installed on the vehicle's onboard power supply (12-24V). Professional installation is recommended.

1. Identify a stable 12-24V power source in your vehicle (e.g., ACC power, battery).
2. Connect the red wire of the device's harness to the positive (+) terminal of the power source.
3. Connect the black wire of the device's harness to the negative (-) terminal or vehicle ground.
4. If your model includes a relay for remote engine cut-off, follow the specific wiring diagram provided with the relay.
5. Secure the GPS unit in a hidden but accessible location within the vehicle, ensuring it has a clear view of the sky for optimal GPS signal reception. Avoid placing it near large metal objects that could interfere with the signal.

Figure 5.1: BN-401A-N GPS Tracker with Wiring.

5.3 App and Web Plataformaren konfigurazioa

BAANOOL provides a free mobile application and web platform for managing your GPS tracker.

1. Deskargatu aplikazioa: Bilatu "BAANOOL IOT" on the Apple App Store or Google Play Store and install it on your smartphone.
2. Sarbidea Web Plataforma: Visit the official BAANOOL tracking webgunea (URL typically provided in the packaging or quick start guide).
3. Erregistratu/Hasi saioa: Create an account or log in using your existing credentials. You will typically register the device using its unique ID number (IMEI), found on the device itself or its packaging.
4. Konfiguratu APN: Depending on your SIM card provider, you may need to configure the APN settings. This can usually be done via SMS commands sent to the device or through the platform/app settings. Refer to your SIM card provider's APN information.

Figure 5.2: BAANOOL Tracking App Interface.

6. Funtzionamendu-argibideak

6.1 Denbora errealeko jarraipena

Once the device is installed and connected to the platform, you can view bere denbora errealeko kokapena.

• Open the BAANOOL IOT app or log in to the web plataforma.
• Hautatu zure gailua zerrendatik.
• The map will display the current location of your vehicle. Information such as speed, direction, and status (e.g., ACC on/off) will also be shown.

6.2 History Playback

Review past routes and activities of your vehicle.

• Navigate to the "History Playback" section in the app or web plataforma.
• Hautatu nahi duzun data eta ordu-tartea.
• The system will display the vehicle's route during that period, along with details like stops and speeds.

6.3 GEO-Fence Setup

Set up virtual boundaries to receive alerts when the vehicle enters or exits a defined area.

• Go to the "GEO-Fence" or "Geofence" section.
• Draw a polygon or circle on the map to define the desired area.
• Name the geofence and configure alert preferences (e.g., entry alert, exit alert).
• Save the geofence.

6.4 Bluetooth Configuration (BN-401A-N)

The BN-401A-N supports parameter configuration via Bluetooth, allowing for easy setup and adjustments.

• Ziurtatu Bluetootha gaituta dagoela zure telefonoan.
• Open the BAANOOL IOT app and navigate to the device settings or configuration section.
• Select the option to connect via Bluetooth. The app will search for nearby devices.
• Once connected, you can configure various parameters such as alarm settings, reporting intervals, and more.

6.5 Remote Control (for BN-401B-N model)

Note: This feature is primarily available for the BN-401B-N model. If your BN-401A-N model supports a remote control, refer to its specific instructions.

The remote control allows for arming/disarming the device and potentially other functions like engine cut-off (if wired with a relay).

• Press the arm button to activate security features.
• Press the disarm button to deactivate security features.
• For engine cut-off, ensure the relay is correctly installed and follow the specific instructions for activating this function via the app or remote.

Figure 6.1: Key Features of the BN-401A-N GPS Tracker.

7. Alarma-funtzioak

The BN-401A-N is equipped with several alarm functions to enhance vehicle security and monitoring:

• ACC Alarm: Triggers when the vehicle's ignition (ACC) is turned on or off unexpectedly.
• Shock Alarm: Alerts you to sudden impacts or vibrations detected by the device.
• Bateria baxuaren alarma: Notifies you when the device's internal backup battery is running low.
• External Power Disconnection Alarm: Informs you if the main power supply to the device is cut.
• SOS alarma: Can be triggered manually (if an SOS button is connected or via specific command) to send an emergency alert.
• Mugimenduaren alarma: Alerts if the vehicle moves from its parked location without authorization.
• Abiadura Gaineko Alarma: Notifies you if the vehicle exceeds a pre-set speed limit.

These alarms can typically be configured via the BAANOOL IOT app or web platform, allowing you to set thresholds and notification methods (e.g., app push, SMS, email).

8. Mantentzea

To ensure the longevity and reliable performance of your BAANOOL GPS tracker, consider the following maintenance tips:

• Ohiko egiaztapenak: Periodically check the device's physical connections to ensure they are secure and free from corrosion.
• Software eguneraketak: Keep the BAANOOL IOT app updated to the latest version to benefit from new features and bug fixes.
• Garbitasuna: Keep the device free from dust and debris. Wipe with a soft, dry cloth if necessary.
• Bateria osasuna: While the device is primarily powered by the vehicle, its internal battery provides backup. Avoid prolonged periods of vehicle inactivity if relying solely on the internal battery.

9. Arazoak

If you encounter issues with your BN-401A-N GPS tracker, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact BAANOOL customer support for further assistance.

10. Bermea eta Laguntza

BAANOOL GPS trackers come with a 15 hilabeteko bermea. As an original manufacturer, BAANOOL provides comprehensive after-sales service.

If you experience any issues with your device or require technical assistance, please do not hesitate to contact BAANOOL customer support. Provide your device's IMEI number and a detailed description of the problem to receive prompt and satisfied solutions.

For more information, visit the official BAANOOL store on Amazon: BAANOOL Store