1. Sarrera
This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.
Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.
2. Paketearen edukia
Egiaztatu osagai guztiak paketean daudela:
- Electronic Depth Gage Unit
- Set of Measurement Rods (7 pieces)
- Biltegiratze-zorroa
- Warranty Letter
Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.
3. Ezaugarri nagusiak
- Ebazpena: 0.0005-inch / 0.01mm for precise measurements.
- Estandarra betetzea: Manufactured in accordance with DIN863 standards.
- Burua: Hardened, ground, and lapped for enhanced accuracy.
- Aniztasuna: Designed to accommodate a broad range of measurement applications.
- Pantaila: Large, digital display for clear and quick readings.
- Eraikuntza: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
- Zero-berrezarri: Ability to reset to zero at any position for comparative depth measurements.
4. Konfiguratzeko argibideak
4.1. Bateriaren instalazioa
The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:
- Bilatu bateriaren konpartimentuaren estalkia pantaila digitalaren unitatearen atzealdean.
- Erabili bihurkin txiki bat edo txanpon bat estalkia irekitzeko.
- Sartu CR2032 bateria berri bat alde positiboa (+) gora begira duela.
- Jarri bateriaren konpartimenduaren estalkia ongi.
4.2. Attaching Measurement Rods
Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.
- Identify the threaded end of the measurement rod.
- Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
- Ensure the rod is securely attached and straight.
Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.
Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.
5. Funtzionamendu-argibideak
5.1. Piztu/Itzali
- Sakatu ON/OFF gailua pizteko botoia.
- Sakatu ON/OFF button again to power off the device.
5.2. Unit Conversion (Inch/Millimeter)
- Sakatu mm/in button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.
5.3. Zero Setting
The zero-reset function allows for comparative measurements or setting a reference point.
- Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
- Sakatu ZERO botoia. Pantailak '0.000' edo '0.00' erakutsiko du.
5.4. Neurketa bat egitea
- Ensure the depth gage is zeroed on a reference surface.
- Place the base of the depth gage firmly on the surface from which the depth is to be measured.
- Lower the measurement rod into the hole or recess until its tip contacts the bottom.
- Irakurri neurketa zuzenean pantaila digitalean.
5.5. Eutsi funtzioa
- Sakatu EUTSI button to freeze the current reading on the display.
- Sakatu EUTSI botoia berriro sakatu irakurketa askatzeko eta neurketa errealera itzultzeko.
5.1 irudia: Xehetasun zehatza view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.
6. Mantentzea
6.1. Garbiketa
- Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
- Zikinkeria egoskorrerako, erabili zapi arin batampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
- Ensure no liquid enters the electronic components.
6.2. Biltegiratzea
- Store the depth gage in its protective case when not in use.
- Gorde gailua leku lehor batean, eguzki-argitik, tenperatura muturrekoetatik eta hezetasun handitik babestuta.
- Denbora luzez gordetzen baduzu, kendu bateria isuriak saihesteko.
6.3. Bateria ordezkatzea
Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.
7. Arazoak
- Pantaila hutsik edo ilun dago:
Check battery installation. Replace the battery if necessary. Ensure the device is powered on. - Irakurketa zehaztugabeak:
Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached. - Botoiek ez dute erantzuten:
Check battery level. If the issue persists after battery replacement, contact customer support.
8. Produktuaren zehaztapenak
| Zehaztapena | Xehetasuna |
|---|---|
| Modelo zenbakia | 4710-1205 |
| Neurketa-eremua | 0-16 hazbete / 0-400 mm |
| Ebazpena | 0.0005 hazbete / 0.01 mm |
| Zehaztasuna | 0.0015 hazbete / 0.03 mm |
| Materiala | Altzairu herdoilgaitz gogortua |
| Energia iturria | CR2032 Battery (typical) |
| Paketearen neurriak | 9 x 5 x 2 hazbete |
| Elementuaren pisua | 12.8 ontza |
Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.
9. Bermea eta Laguntza
This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official webgune edo bezeroarentzako arretarako kanalak.
