1. Produktua amaitu daview
The Satco S11520 ST19 LED bulb combines classic design with modern energy efficiency. This 6-watt LED bulb is designed to replace a traditional 40-watt incandescent bulb, providing 500 lumens of warm 2700K illumination. Its vintage ST19 shape, clear glass housing, and flex gray coil filament offer a decorative aesthetic suitable for various fixtures. The bulb features a standard medium E26 base, is fully dimmable on 120V circuits, and is rated for use in enclosed fixtures and wet locations.
1. irudia: Aurrealdea view of the Satco S11520 ST19 LED Bulb, showcasing its clear glass and flex gray coil filament.
Ezaugarri nagusiak:
- VintagDiseinua: ST19 shape with clear glass and gray flex coil filament for a classic aesthetic.
- Energia eraginkorra: 6W LED replaces 40W incandescent, delivering 500 lumens.
- Argi zuri epela: 2700K color temperature for a comfortable and inviting glow.
- Erregulagarria: Compatible with most standard 120V dimmer switches for adjustable light levels.
- Koloreen errendatze handia: CRI of 93+ ensures accurate and vibrant color representation.
- Bateragarritasun zabala: Medium E26 base fits most standard household fixtures.
- Iraunkorra: Rated for 15,000 hours of operation and suitable for enclosed fixtures and wet locations.
2. Segurtasun informazioa
Please read and understand all safety instructions before installing or using this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Itzali: Always turn off the power to the fixture at the circuit breaker or fuse box before installation, removal, or inspection.
- Egokia Voltage: Ziurtatu hornidura boltage is 120V AC, 60Hz. This bulb is designed for 120V circuits only.
- Gailuen bateragarritasuna: Use only in fixtures designed for light bulbs with a medium E26 base.
- Pisua: Do not exceed the weight limit of the fixture. This bulb weighs approximately 2.72 ounces.
- Manipulazioa: Handle the bulb by its base, not the glass, to avoid breakage or damage.
- Tenperatura: Do not use in environments where the operating temperature exceeds the bulb's rating (-4°F to +113°F / -20°C to +45°C).
- Xedapena: Bonbilla erabiliak tokiko araudien arabera bota.
- Dimmers: When using with a dimmer, ensure the dimmer is compatible with LED bulbs. Incompatible dimmers may cause flickering or damage to the bulb.
3. Instalazioa
Follow these steps to safely install your Satco S11520 LED bulb:
- Itzali energia: Before beginning, ensure the power to the light fixture is completely turned off at the circuit breaker or wall switch.
- Kendu bonbilla zaharra: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it was recently in use.
- Ikuskatu finkapena: Check the fixture for any damage or loose wiring. Ensure the socket is clean and dry.
- Instalatu bonbilla berria: Gently screw the Satco S11520 LED bulb into the E26 medium base socket until it is snug. Do not overtighten.
- Berrezarri boterea: Piztu berriro korrontea etengailu elektrikoan edo hormako etengailuan.
- Proba: Piztu argiaren etengailua bonbilla behar bezala funtzionatzen duela baieztatzeko.
Figure 2: Dimensions of the Satco S11520 ST19 LED Bulb, showing its E26 medium base.
This bulb is suitable for use in enclosed fixtures and wet locations, offering versatility for various indoor and covered outdoor applications.
4. Funtzionamendu-argibideak
The Satco S11520 LED bulb operates like a standard light bulb but offers dimming capabilities and energy efficiency.
- Piztu/Itzaltzea: Use your existing wall switch to turn the light on or off.
- Iluntzeko funtzioa: If connected to a compatible LED dimmer switch, adjust the dimmer control to achieve your desired brightness level. The bulb supports smooth dimming down to soft accent levels.
- Argiaren irteera: This bulb provides 360° omnidirectional lighting, ensuring consistent and balanced illumination in your space.
5. Mantentzea
The Satco S11520 LED bulb requires minimal maintenance due to its long lifespan.
- Garbiketa: Ziurtatu argindarra itzalita dagoela garbitu aurretik. Erabili zapi leun eta lehor bat bonbilla garbitzeko. Ez erabili garbitzaile likidorik edo material urratzailerik.
- Ordezkoa: This LED bulb has an average life of 15,000 hours. When replacement is needed, follow the installation steps in Section 3.
6. Arazoak
If you encounter issues with your Satco S11520 LED bulb, refer to the following common troubleshooting steps:
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Bonbilla ez da pizten. | No power to the fixture, loose connection, or faulty bulb. |
|
| Bulb flickers or hums. | Argi-erregulatzaile bateraezina edo elikatze-iturri ezegonkorra. |
|
| Argi-irteera oso ahula edo oso distiratsua da. | Dimmer setting or incorrect bulb for application. |
|
If the problem persists after trying these steps, please contact Satco customer support.
7. Zehaztapenak
Detailed technical specifications for the Satco S11520 ST19 LED Bulb:
| Atributua | Balioa |
|---|---|
| Modelo zenbakia | S11520 |
| Marka | Satco |
| Bonbilla mota | LED |
| Bonbilla Forma Tamaina | ST19 |
| Wattage | 6 Watt |
| Goritasunezko baliokidea | 40 Watt |
| Distira | 500 lumen |
| Kolore Tenperatura | 2700 Kelvin (zuri epela) |
| Kolore errendatze indizea (CRI) | 93+ |
| Oinarri Mota | E26 (ertaina) |
| liburukiatage | 120 V AC |
| Erregulagarria | Bai |
| Beam Angelua | 360° norabide guztietan |
| Batez besteko Bizitza | 15,000 ordu |
| Funtzionamendu-tenperatura | -4°F eta +113°F (-20°C eta +45°C) |
| Kokapenaren balorazioa | Wet Location Rated, Enclosed Fixture Rated |
| Neurriak (L x D) | 5.31" x 2.28" (134.87 mm x 57.91 mm) |
| Elementuaren pisua | 2.72 ontza |
| UPC | 045923115202 |
Figure 3: Product packaging displaying key specifications for the Satco S11520 ST19 LED Bulb.
Figure 4: Lighting Facts label, detailing brightness, energy cost, life, and light appearance for the Satco S11520 ST19 LED Bulb.
8. Bermea eta Laguntza
The Satco S11520 LED bulb is backed by a 3 urteko berme mugatuaBerme honek materialen eta fabrikazioaren akatsak estaltzen ditu erabilera eta zerbitzu normalaren pean.
For warranty claims, technical assistance, or any questions regarding your product, please contact Satco customer support. Keep your proof of purchase for warranty validation.
Satco Customer Support:
- Refer to the official Satco webharremanetarako informazioa lortzeko gunea.
- Provide the model number (S11520) when contacting support.
