1. Sarrera
This manual provides essential information for the safe and proper operation, maintenance, and troubleshooting of your Umarex GLOCK 19 Gen3 6mm BB Pistol Airsoft Gun. Please read this manual thoroughly before using the airsoft pistol.
The GLOCK 19 is a compact version of the GLOCK 17, designed for quick handling and easy carrying. This Umarex airsoft replica features ergonomics, function, and handling similar to its original counterpart, with a weight that closely matches the real firearm. It is powered by a 12-gram CO2 cartridge (not included) and is designed to shoot 6mm plastic airsoft BBs.
Key features include a metal slide, drop-free magazine, and a smooth action, making it suitable for airsoft play, target shooting, and as a training tool.
2. Segurtasun informazioa
WARNING: This is not a toy. Misuse or careless use may cause serious injury or death. Eye protection must be worn by the user and any person within range. Read all instructions before using.
- Always treat the airsoft pistol as if it were loaded.
- Always keep the muzzle pointed in a safe direction.
- Mantendu hatza abiarazletik at tiro egiteko prest egon arte.
- Be sure of your target and what is beyond it.
- Always wear appropriate eye protection (ANSI Z87.1 rated or higher) when handling or operating the airsoft pistol.
- Never point the airsoft pistol at people or animals.
- Use only 6mm plastic airsoft BBs. Do not use metal BBs or other projectiles.
- Store the airsoft pistol unloaded and in a secure location, out of reach of children.
- Do not alter or modify the airsoft pistol.
3. Konfigurazioa
3.1 Loading the CO2 Cartridge
- Ensure the airsoft pistol is unloaded and the safety is engaged.
- Remove the magazine from the airsoft pistol.
- Locate the CO2 cartridge compartment, typically at the base of the magazine.
- Unscrew the CO2 cap or piercing screw.
- Insert a new 12-gram CO2 cartridge into the compartment, narrow end first.
- Tighten the CO2 cap or piercing screw firmly until the cartridge is pierced and you hear a small hiss of gas. Do not overtighten.
- For best performance and to ensure a proper seal, Umarex-brand CO2 is recommended.
3.2 Loading BBs
- With the magazine removed from the airsoft pistol, locate the BB loading port.
- Pull down the follower spring tab at the bottom of the magazine track and hold it.
- Insert 6mm plastic airsoft BBs into the loading port. The magazine has a capacity of 11 rounds.
- Release the follower spring tab gently to allow the BBs to settle.
- Insert the loaded magazine back into the airsoft pistol until it clicks into place.
4. Funtzionamendu-argibideak
4.1 Firing the Airsoft Pistol
- Ensure you are in a safe shooting environment and wearing eye protection.
- Point the airsoft pistol at your intended target.
- Disengage the safety mechanism (refer to the pistol's specific safety lever location).
- Grip the pistol firmly and place your finger on the trigger.
- Pull the trigger to fire. The pistol is designed for a smooth action.
- After firing, engage the safety mechanism.
4.2 Disassembly (Field Stripping)
The GLOCK 19 airsoft pistol allows for field stripping similar to the original for cleaning and maintenance.
- Ensure the airsoft pistol is unloaded and the magazine is removed.
- Pull the slide back slightly and pull down on the takedown levers located on both sides of the frame.
- While holding the levers down, push the slide forward off the frame.
- Carefully remove the recoil spring and outer barrel assembly from the slide.
5. Mantentzea
Regular maintenance ensures the longevity and optimal performance of your Umarex GLOCK 19 airsoft pistol.
5.1 Garbiketa
- After field stripping, clean the inner barrel using a cleaning rod and a small piece of cloth or cotton swab.
- Apply a small amount of silicone oil (specifically designed for airsoft guns) to moving parts such as the slide rails and O-rings to ensure smooth operation and prevent wear. Do not use petroleum-based lubricants.
- Wipe down the exterior with a clean, dry cloth.
5.2 Biltegiratzea
- Always store the airsoft pistol unloaded and with the CO2 cartridge removed.
- Gorde leku fresko eta lehor batean, eguzki-argitik eta muturreko tenperaturatik urrun.
- Keep out of reach of children and unauthorized users.
6. Arazoak
| Arazoa | Kausa posiblea | Irtenbidea |
|---|---|---|
| Low FPS / Weak Shots | Low CO2 pressure; CO2 leak; Worn seals. | Replace CO2 cartridge; Check for leaks and tighten connections; Apply silicone oil to seals or replace if damaged. |
| BBs not feeding | Magazine improperly loaded; Damaged magazine; Incorrect BB size. | Ensure BBs are loaded correctly; Inspect magazine for damage; Use only 6mm plastic airsoft BBs. |
| Pistola ez da tiro egiten | Safety engaged; No CO2; Magazine not inserted correctly. | Disengage safety; Replace CO2 cartridge; Reinsert magazine firmly. |
7. Zehaztapenak
| Ereduaren izena | GLOCK 19 Gen3 6mm BB Pistol Airsoft Gun |
| Zati zenbakia | 2280118-P |
| Marka | Umarex |
| Energia iturria | 12-gram CO2 cartridge |
| Munizio mota | 6mm plastic airsoft BBs |
| Muzzle abiadura | Up to 350 FPS (Feet Per Second) |
| Aldizkariaren edukiera | 11 txanda |
| Upel Materiala | Metala |
| Markoaren materiala | Metala |
| Kolorea | Beltza |
| Dakarten osagaiak | GLOCK 19 Gen3 6mm BB Pistol Airsoft Gun, SB199 Compliant |
8. Bermea eta Laguntza
This Umarex airsoft pistol is typically covered by a manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the documentation included with your product packaging or visit the official Umarex USA webgunea.
For technical support, spare parts, or service inquiries, please contact Umarex USA directly through their official website or customer service channels. Always provide your model name (GLOCK 19 Gen3) and part number (2280118-P) when seeking support.
Official Umarex USA Webgunea: www.umarexa.com
9. Important Notes on Media
No relevant product images were found in the provided data for inclusion in this manual. The image provided was a placeholder "No image available" GIF.
No official product videos from the seller were found in the provided data for inclusion in this manual.
