LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor User Manual

1. Sarrera

Thank you for choosing the LEDVANCE 17W 2400LM IP65 LED Spotlight with Motion and Light Sensor. This manual provides essential information for the safe installation, operation, and maintenance of your new LED spotlight. Please read these instructions carefully before installation and retain them for future reference.

2. Segurtasun informazioa

• Segurtasun elektrikoa: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected before installation, maintenance, or repair.
• liburukiatage: Produktu honek 220 Voltekin funtzionatzen du. Egiaztatu zure energia-iturriak baldintza hau betetzen duela.
• IP65 balorazioa: The spotlight is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is suitable for outdoor use but should not be submerged in water.
• Beroa: Do not cover the spotlight during operation, as this may cause overheating.
• Erregulagarria ez: This LED spotlight is non-dimmable. Do not connect it to a dimmer switch.
• Argi iturria: LED argi-iturria ezin da ordezkatu. Argi-iturria huts egiten badu, luminaria osoa ordezkatu behar da.

3. Paketearen edukia

Mesedez, egiaztatu paketea osagai guztiak daudela ziurtatzeko:

• LEDVANCE 17W 2400LM LED Spotlight unit
• Muntatzeko tarte
• Screws and wall anchors (may vary by region)
• Argibide eskuliburua

4. Konfigurazioa eta instalazioa

Instalazio egokia lortzeko, jarraitu urrats hauek:

4.1 Aurreinstalazioa

• Itzali: Ziurtatu instalazio-eremuko energia-hornidura nagusia etengailu magnetotermikoan itzalita dagoela.
• Kokapena aukeratzea: Choose a suitable outdoor location for the spotlight. Consider the desired coverage area for the light and the effective range of the motion and light sensors. Ensure the mounting surface is sturdy enough to support the fixture.
• Dimensions Check: Refer to the product dimensions to ensure adequate space for installation.

This diagram illustrates the physical dimensions of the LEDVANCE LED Spotlight. The front view shows a width of 157 mm, and the side view shows a height of 183 mm and a depth of 56.5 mm, providing crucial measurements for installation planning.

4.2 Muntaketa

1. Position the mounting bracket on the desired surface and mark the drilling points.
2. Egin zuloak markatutako posizioetan eta sartu hormako aingurak beharrezkoa bada.
3. Lotu muntatzeko euskarria gainazalera emandako torlojuak erabiliz.
4. Attach the LED spotlight unit to the mounting bracket, ensuring it is firmly secured. Adjust the angle of the spotlight as needed.

4.3 Kableatua

• Connect the spotlight's electrical wires to your mains power supply (220V). Ensure correct polarity (Live, Neutral, Earth) according to local wiring regulations.
• Properly insulate all connections to prevent short circuits and ensure safety.
• Kableatua osatu eta seguru dagoenean, berrezarri korrontea zirkuituari.

This image displays the product packaging for the LEDVANCE Floodlight Sensor, highlighting key features such as 17W power, 2400 lumens, IP65 rating, 5-year guarantee, 4000K color temperature, and motion/light sensor capabilities. It also shows the product's model number and various certifications.

5. Funtzionamendu-argibideak

The LEDVANCE spotlight is designed for automatic operation based on its integrated motion and light sensors.

• Light Sensor (Dusk-to-Dawn): The integrated light sensor detects ambient light levels. The spotlight will automatically activate when the ambient light falls below a certain threshold (e.g., at dusk) and deactivate when sufficient light is present (e.g., at dawn).
• Mugimendu-sentsorea: The motion sensor detects movement within its detection range. When motion is detected, the spotlight will illuminate for a set duration. After the motion ceases and the set time expires, the light will turn off, provided the ambient light level is above the threshold set by the light sensor.
• Doikuntzak: While specific adjustment controls are not detailed, some models may feature adjustable settings for motion sensitivity, light threshold, and illumination duration. Refer to any labels on the fixture itself for potential adjustment dials.

6. Mantentzea

The LEDVANCE spotlight requires minimal maintenance.

• Garbiketa: Periodically clean the surface of the spotlight and the sensor lens with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or the sensor.
• Ikuskapena: Aldian-aldian ikuskatu instalazioa kalteen, kable solteen edo korrosioaren zantzurik dagoen ikusteko. Konpondu edozein arazo berehala.
• Erabiltzaileak ez du zerbitzurik gabeko piezarik: There are no user-serviceable parts inside the fixture. Do not attempt to open or repair the unit yourself.

7. Arazoak

If you encounter issues with your LEDVANCE spotlight, refer to the following common problems and solutions:

8. Zehaztapenak

9. Bermea eta Laguntza

This LEDVANCE spotlight comes with a 5 urteko bermea erosketa-datatik aurrera. Berme honek ohiko erabileran materialen eta eskulanen akatsak estaltzen ditu.

For warranty claims, technical support, or any questions not covered in this manual, please contact your retailer or the LEDVANCE customer service directly. Keep your proof of purchase for warranty validation.