TP-Link Mercusys MS116GS 16 atakako Gigabit switch-aren erabiltzailearen eskuliburua

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of your TP-Link Mercusys MS116GS 16-Port Gigabit Switch. The MS116GS is designed to expand your wired network with high-speed Gigabit Ethernet ports, offering features like Plug & Play setup, Isolation Mode, and Loop Prevention for enhanced network performance and security.

2. Produktua amaitu daview

The Mercusys MS116GS is a 16-port Gigabit Ethernet switch, ideal for expanding network capacity in homes or small offices. It features a durable metal casing and fanless design for silent operation.

2.1. irudia: Aurrealdea view of the Mercusys MS116GS 16-Port Gigabit Switch, showing 16 RJ45 ports, LED indicators, and mode switches.

Ezaugarri nagusiak:

• Gigabit ataka osoak: 16 RJ45 ports with 10/100/1000 Mbps auto-negotiation supporting Auto-MDI/MDIX.
• Plug and Play: Simple to use and saves time and effort.
• Isolamendu modua: Allows one-click client traffic separation for higher security and performance.
• Begizta prebentzioa: Automatically detects and blocks network loops to prevent broadcast storms.
• Metalezko C iraunkorraasing: Allows for efficient heat dissipation and long network life.
• Funtzionamendu isila: Fanless design for quiet use.

Paketearen edukia:

• Mercusys MS116GS 16-Port Gigabit Switch
• Elikatze-moldagailua
• Erabiltzailearen eskuliburua

3. Konfigurazioa

The MS116GS switch is designed for easy installation. No software configuration is required.

3.1 Instalazio fisikoa

1. Lekua: Place the switch on a stable, flat surface, such as a desktop, or mount it in a rack. Ensure adequate ventilation around the device.
2. Potentzia-konexioa: Connect the provided power adapter to the switch's power port and then plug the adapter into a standard electrical outlet. The Power LED on the front panel should illuminate.
3. Sare-konexioak: Connect your network devices (e.g., computers, printers, IP cameras, routers) to any of the 16 RJ45 ports using Ethernet cables. The corresponding Link/Act LED for each connected port will light up, indicating an active connection.

3.1. irudia: Atzekoa view of the Mercusys MS116GS, showing the power input and ventilation.

3.2. irudia: Illustration of the Plug and Play setup, showing the switch connected to a computer.

3.2 LED adierazleak

The front panel features LED indicators to monitor the switch's status:

• Power LED:
  • Aktibatuta: etengailua piztuta dago.
  • Off: etengailua itzalita dago.
• Link/Act LEDs (for each port):
  • On: A device is connected to the corresponding port.
  • Flashing: Data is being transmitted or received through the corresponding port.
  • Desaktibatuta: ez dago gailurik konektatutako dagokion ataka batera.

4. Funtzionamendu-argibideak

The MS116GS switch operates automatically once connected. It supports two special modes: Isolation Mode and Loop Prevention Mode, which can be activated via physical switches on the device.

4.1. irudia: Close-up of the mode switches for Isolation and Loop Prevention, located on the right side of the switch.

4.1 Isolamendu modua

Isolation Mode allows for one-click client traffic separation. When enabled, ports 1-14 are isolated from each other, preventing them from communicating directly. All isolated ports can still communicate with ports 15-16 (uplink ports). This mode enhances security and performance by preventing broadcast storms and improving LAN security.

• To enable Isolation Mode: Set the "Isolation" switch to the "On" position.
• To disable Isolation Mode: Set the "Isolation" switch to the "Off" position (Default Mode).

4.2 Loop Prevention Mode

Loop Prevention Mode automatically detects and blocks network loops. A network loop occurs when there are multiple paths between two network devices, which can cause broadcast storms and network instability. When a loop is detected, the switch will block the corresponding port to prevent network disruption.

• To enable Loop Prevention Mode: Set the "Loop Prevention" switch to the "On" position.
• To disable Loop Prevention Mode: Set the "Loop Prevention" switch to the "Off" position (Default Mode).

5. Mantentzea

Proper maintenance ensures the longevity and optimal performance of your MS116GS switch.

• Garbiketa: Garbitu etengailuaren kanpoaldea aldizka oihal leun eta lehor batekin. Ez erabili garbitzaile likido edo aerosolik.
• Aireztapena: Ensure that the ventilation holes on the sides of the switch are not obstructed. Proper airflow is crucial for heat dissipation.
• Elikatze-iturria: Use only the power adapter provided with the switch. Using an incorrect power adapter may damage the device.
• Ingurumena: Erabili etengailua zehaztutako tenperatura eta hezetasun tarteetan. Saihestu eguzki-argitan edo bero-iturrien ondoan jartzea.

6. Arazoak

This section addresses common issues you might encounter with your MS116GS switch.

6.1 Power LED is Off

• Ziurtatu korronte-egokitzailea etengailura eta funtzionatzen duen entxufe elektriko batera ondo konektatuta dagoela.
• Egiaztatu entxufea behar bezala funtzionatzen duela beste gailu bat konektatuz.

6.2 Link/Act LED is Off for a Connected Device

• Egiaztatu Ethernet kablea ondo konektatuta dagoela bai switch atakan bai sareko gailuan.
• Ziurtatu konektatutako gailua piztuta dagoela eta bere sare-egokitzailea behar bezala funtzionatzen duela.
• Try a different Ethernet cable or a different port on the switch.
• Verify that the cable length does not exceed the maximum recommended length (typically 100 meters for Ethernet).

6.3 Sarearen abiadura motela

• Ziurtatu konektatutako gailu eta kable guztiek Gigabit Ethernet (1000 Mbps) onartzen dutela errendimendu optimoa lortzeko.
• Check for network loops. If Loop Prevention Mode is off, consider enabling it.
• If Isolation Mode is enabled, ensure it is not inadvertently affecting communication between devices that need to interact directly.
• Berrabiarazi etengailua eta konektatutako gailuak.

7. Zehaztapenak

8. Bermea eta Laguntza

For warranty information and technical support, please refer to the official Mercusys website or contact your local Mercusys support team. Details regarding spare parts availability and software update guarantees are not provided in the product specifications.

You can find more information and support resources at the official Mercusys webgunea: www.mercusys.com