KYORITSU AC Clamp Meter 2002PA Instruction Manual

1. Bukatu daview

The KYORITSU AC Clamp Meter 2002PA is a versatile electrical measuring instrument designed for accurate measurement of AC current up to 2000A. It features a large teardrop-shaped core for easy clamping around conductors, a recorder output terminal, and multiple functions including AC/DC voltage, resistance, and continuity testing. This manual provides essential information for safe and effective use of the device.

Figure 1: KYORITSU AC Clamp Meter 2002PA

This image shows the KYORITSU AC Clamp Meter 2002PA, a black handheld device with a red clamp jaw at the top. The display shows "000" and there are several buttons below it. The device is designed for measuring electrical current without direct contact.

2. Segurtasun informazioa

Always read and understand this instruction manual before using the KYORITSU AC Clamp Meter 2002PA. Failure to follow safety instructions may result in electric shock, fire, or damage to the device. This product complies with IEC 61010-1, IEC 61010-031, IEC 61010-2-032, and IEC 61326-1 standards.

• Ez use the meter if it appears damaged or is operating abnormally.
• Ez aplikatu voltage or current exceeding the maximum rated values.
• Ensure the battery cover is securely closed before operation.
• Always wear appropriate personal protective equipment (PPE) when working with electrical circuits.
• Ez use the meter in wet environments or during electrical storms.
• Refer to local and national safety codes for proper electrical work procedures.

3. Ezaugarri nagusiak

• Large Teardrop Core: Erraztu egiten du cl errazaamping around thick conductors.
• Korronte Handiko Neurketa: Capable of measuring large AC currents up to 2000A.
• Funtzio anitzekoa: Measures AC current, AC voltage, DC boltage, erresistentzia eta jarraitutasuna.
• Recorder Output Terminal: Allows connection to external recording devices.
• Bereizmen handia: Features a small resolution of 0.1A for precise measurements.
• Data Hold & Peak Hold: For capturing stable or peak readings.
• Energia aurrezte automatikoa: Extends battery life by automatically turning off after a period of inactivity.

4. Konfigurazioa

4.1 Bateriaren instalazioa

1. Bilatu bateriaren konpartimentuaren estalkia neurgailuaren atzealdean.
2. Use a screwdriver (if required) to open the battery compartment.
3. Insert two AA (R6P, 1.5V) batteries, ensuring correct polarity.
4. Replace the battery compartment cover and secure it firmly.

4.2 Connecting Test Leads (for Voltage/Erresistentzia/Jarraitasuna)

1. Insert the red test lead into the VΩ terminal.
2. Sartu proba-kable beltza COM terminalean.
3. Ensure connections are secure before taking measurements.

5. Funtzionamendu-argibideak

5.1 Korronte alternoaren neurketa

1. Turn the rotary switch to the "ACA" position.
2. Ireki clamp masailezurra palanka sakatuz.
3. Enclose only one conductor of the circuit to be measured within the clamp masailezurra.
4. Release the lever to close the clamp jaw securely around the conductor.
5. Irakurri LCD pantailan agertzen den korronte alternoaren balioa.

5.2 AC Vol. neurtzeatage

1. Turn the rotary switch to the "ACV" position.
2. Connect the test leads across the circuit points where voltage neurtu behar da.
3. Irakurri AC liburukiatagLCDan bistaratzen den balioa.

5.3 DC Vol. neurtzeatage

1. Turn the rotary switch to the "DCV" position.
2. Connect the test leads across the circuit points where voltage is to be measured, observing polarity.
3. Irakurri DC liburuatagLCDan bistaratzen den balioa.

5.4 Erresistentzia neurtzea

1. Biratu biraketa-etengailua "Ω" posiziora.
2. Ziurtatu zirkuitua deskonektatuta dagoela erresistentzia neurtu aurretik.
3. Connect the test leads across the component or circuit path to be measured.
4. Irakurri LCD pantailan agertzen den erresistentzia balioa.

5.5 Jarraitasun proba

1. Turn the rotary switch to the "Continuity" position (often indicated by a speaker icon).
2. Ziurtatu zirkuitua desenergizatuta dagoela.
3. Konektatu proba-kableak osagaiaren edo zirkuituaren bidean zehar.
4. If continuity exists (resistance below approximately 50±35Ω), the buzzer will sound.

6. Mantentzea

6.1 Garbiketa

• Wipe the meter with a soft, dry cloth.
• Ez erabili garbitzaile urratzaileak edo disolbatzaileak.

6.2 Bateria ordezkatzea

• When the battery indicator appears on the display, replace the batteries as described in Section 4.1.
• Kendu bateriak neurgailua denbora luzez erabiliko ez bada, isuriak saihesteko.

7. Arazoak

8. Zehaztapenak

Figure 2: Detailed specifications for KYORITSU AC Clamp Meter 2002PA and 2002R (RMS).

This image displays a table of detailed specifications for the KYORITSU AC Clamp Meter models 2002PA and 2002R. It includes measurement ranges and accuracies for AC current, AC voltage, DC boltage, resistance, and continuity, along with physical dimensions, power source, and compliance standards.

9. Bermea eta Laguntza

For warranty information, technical support, or service inquiries, please refer to the contact details provided in the product packaging or visit the official KYORITSU webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa berme-erreklamazioetarako.