roborock Q7 L5 Robot Vacuum and Mop Combo User Manual

1. Sarrera

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your roborock Q7 L5 Robot Vacuum and Mop Combo. Please read this manual thoroughly before using the product and retain it for future reference.

Image 1.1: The roborock Q7 L5 Robot Vacuum and Mop Combo, a white circular robot with a LiDAR sensor on top, shown next to a smartphone displaying the roborock app icon.

Ezaugarri nagusiak:

• Ultra-Powerful Deep Suction: 8,000 Pa HyperForce suction for effective cleaning.
• Dual Anti-Tangle Brushes: Main brush and zero-tangle side brush designed to minimize hair wrap.
• Precision LiDAR Navigation: 360° laser mapping for efficient route planning and multi-floor mapping.
• Vacuum & Mop in One Go: Integrated 270 ml water tank with three water levels and a removable mop pad.
• Garbiketa pertsonalizagarria: Set zones, schedules, and suction levels via the Roborock App.
• Joan ezineko guneak: Automatically identifies obstacles and suggests no-go zones to prevent interruptions.

2. Konfigurazioa

2.1 Kutxatik ateratzea eta osagaien egiaztapena

Kontu handiz atera osagai guztiak paketetik. Ziurtatu elementu hauek daudela:

• Q7 L5 Robot Vacuum (1)
• Fregona Modulua (1)
• Hezetasunaren aurkako alfonbra (1)
• Kargatzeko kaia (1)
• Egokitzailea (1)
• Erabiltzailearen eskuliburua (1)

2.2 Kargatzeko kaiaren kokapena

Place the charging dock against a wall on a hard, level surface. Ensure there is at least 0.5 meters (1.6 feet) of clear space on both sides and 1.5 meters (4.9 feet) in front of the dock for optimal navigation and docking. Connect the adapter to the charging dock and plug it into a power outlet.

Image 2.1: The roborock Q7 L5 robot vacuum docked at its charging station, positioned against a wall in a room.

2.3 Hasierako karga

Place the robot onto the charging dock. The power indicator light will illuminate, indicating that charging has begun. For first-time use, fully charge the robot before operation.

2.4 Aplikazioaren instalazioa eta konexioa

Deskargatu Roborock App from your device's app store. Follow the in-app instructions to connect your robot vacuum to your home Wi-Fi network (2.4G WiFi only supported). The app allows for advanced control and customization of cleaning settings.

Image 2.2: A collage showing the roborock Q7 L5 robot vacuum and various screenshots of the Roborock app interface, illustrating features like temporary cleaning, carpet boost mode, schedule cleaning, child lock, suction control, cleaning route setting, and clean intensity adjustment.

3. Funtzionamendu-argibideak

3.1 Basic Cleaning

Press the power button on the robot or use the Roborock App to start a cleaning cycle. The robot will automatically map your home using its LiDAR navigation system and plan the most efficient cleaning route.

Image 3.1: An illustration demonstrating the robot vacuum's smart navigation using LiDAR, showing a detailed mapped route compared to a less efficient, random path.

3.2 Vacuum and Mop Functionality

The Q7 L5 can vacuum and mop simultaneously. Attach the mop module and fill the 270 ml water tank. You can adjust the water flow level (three settings) via the app to suit different floor types and cleaning needs.

Image 3.2: The roborock Q7 L5 robot vacuum demonstrating its vacuum and mop capabilities, with visual indicators for dustbin capacity (400ml), water tank capacity (270ml), and three water flow levels for electronic mopping.

3.3 Customizing Cleaning with the Roborock App

• Programazioa: Set specific times for cleaning different rooms or areas.
• Xurgatze maila: Adjust suction power for various floor types and debris.
• Debekatutako Eremuak eta Horma Ikusezinak: Define areas the robot should avoid. The robot can suggest these zones automatically.
• Carpet Boost Mode: Automatically increases suction power when detecting carpets.
• Maila anitzeko mapaketa: Supports up to 3 maps for homes with multiple floors.
• Flexible Cleaning Options: Use "Add Area" for quick spot cleaning or "Skip Area" to temporarily bypass zones.

Image 3.3: An illustration showing the robot vacuum avoiding a designated 'No-Go Zone' under a dining table and an 'Invisible Wall' preventing it from entering a specific area.

3.4 Haurrentzako blokeoa

Activate the child lock feature through the Roborock app to prevent accidental starts by children or pets, ensuring uninterrupted operation.

3.5 Off-Peak Charging

Schedule charging during low-demand hours to save energy and ensure your vacuum is always ready to clean.

4. Mantentzea

Mantentze-lan erregularrak zure robot-xurgagailuaren errendimendu optimoa bermatzen du eta bizitza luzatzen du.

4.1 Zaborrontzia hustea

The 400 ml dustbin should be emptied regularly, especially after each cleaning cycle, to maintain suction power. Open the robot's top cover, remove the dustbin, and dispose of collected debris.

Image 4.1: An illustration highlighting the 400 ml dustbin capacity of the robot vacuum, showing it collecting various types of debris like short hair, pet fur, and dirt.

4.2 Iragazkien garbiketa

The filter inside the dustbin is washable. Rinse it under running water and allow it to air dry completely before reinserting. Do not use a brush or fingers to clean the filter, as this may damage it.

4.3 Eskuila nagusia eta alboko eskuila garbitzea

The Q7 L5 features a Dual Anti-Tangle System. Regularly check the main brush and side brush for tangled hair or debris. Use the cleaning tool provided to cut and remove any tangled hair. The zero-tangle side brush is designed to prevent hair wrap.

4.2 irudia: Leherketa bat view of the robot vacuum's underside, highlighting the JawScrapers Comb Anti-Tangle Brush and the upgraded Zero-Tangle Side Brush, designed to prevent hair tangling.

4.4 Mop Module Maintenance

After mopping, remove the mop pad and wash it. The mop pad is reusable. Empty any remaining water from the water tank and allow it to air dry to prevent odors and mildew.

5. Arazoak

If you encounter issues with your roborock Q7 L5, refer to the following common problems and solutions. For more detailed troubleshooting, consult the Roborock App or the official support resources.

5.1 Robot Gets Stuck Frequently

• Ensure the cleaning area is free of small objects, cables, or loose rugs that could obstruct the robot.
• Use the Roborock App to set Ez Joan Zonak or Invisible Walls around problematic areas like cables or table legs. The robot can suggest these zones automatically.

Image 5.1: A split image showing the Roborock app interface for setting 'No-Go Zones' and 'Invisible Walls', alongside visual examples of the robot avoiding these designated areas in a home environment.

5.2 Xurgatze-potentzia murriztua

• Hustu zaborrontzia.
• Garbitu edo ordeztu iragazkia.
• Check the main brush and side brush for tangled hair or debris and clean them.

5.3 Mopping Ineffectiveness

• Ziurtatu ur depositua beteta dagoela.
• Check if the mop pad is properly attached and clean.
• Adjust the water flow level in the app to a higher setting if needed.

5.4 Robota ez da kargatzen

• Ensure the charging dock is properly connected to power.
• Clean the charging contacts on both the robot and the dock with a dry cloth.
• Verify the robot is correctly positioned on the dock.

5.5 Maiz egiten diren galderak

• Q: How effective is the Dual Anti-Tangle System?
  A: The high-suction fan on Q7 L5 boasts a 95% hair pickup rate. All brushes have been tested and certified by TÜV Süd for anti-entanglement. The all-new Dual Anti-Tangle System aims to minimize hair tangles.
• Q: What type of water tank does Q7 L5 use?
  A: Q7 L5 is equipped with an electronic water tank, which offers several water flow levels so you can adjust the mopping water volume to match your floor types and preferences. Note: The water tank and mop cloth mount are detachable.
• Q: How long does it take to charge the robot?
  A: Roborock's smart auto top-up allows the robot to resume cleaning automatically at 80% battery charge after being interrupted for recharging—especially when cleaning larger homes (over 250 m²). In the charging process, it takes about 1 hour for every 20% increase in power and about 3 to 4 hours for a 20-100% increase.

6. Zehaztapenak

7. Bermea eta Laguntza

For detailed warranty information, please refer to the warranty card included with your product or visit the official roborock website. If you require technical support or have questions not covered in this manual, please contact roborock customer service through their official channels.