MONTECH HS01 PRO ATX Erdi-Dorreko PC Kaxa

1. Sarrera

The MONTECH HS01 PRO is an advanced ATX Mid-Tower PC case designed for high-performance gaming systems. It features a unique reversible layout, excellent airflow capabilities, and user-friendly toolless panels for easy assembly and maintenance. This manual provides detailed instructions for setting up, operating, and maintaining your HS01 PRO PC case.

Ezaugarri nagusiak:

• Diseinu itzulgarria: A top-down reversible layout allows the entire setup to be positioned on either the left or right side.
• Aireztapen bertikala: Beheko aire-sarrerak eta goiko irteerak tximinia efektu naturala sortzen dute beroa eraginkortasunez xahutzeko.
• Durability with One-Piece Bezel: A seamless front bezel enhances structural strength and stability.
• GPU bertikalerako prest: PCIe zirrikitu birakariek GPU bertikalki konfiguratzeko aukera ematen dute, euskarri edo oinarri gehigarririk behar izan gabe.
• Hondoratzeko diseinua: Beheko haizagailu eta plaka basearen diseinu hondoratu batek albo garbi eta oztoporik gabe mantentzen du view.
• Aurrez instalatutako haizagailuak: 5 GF120 V2 ARGB haizagailu aurrez instalatuta ditu, plaka basearen argiztapen kontrolarekin guztiz sinkronizagarriak.

2. Produktua amaitu daview

Familiarize yourself with the components and layout of your MONTECH HS01 PRO PC case.

2.1. irudia: Aurrealdea view MONTECH HS01 PRO PC zorroaren erakusleihoaasing the mesh front panel and pre-installed ARGB fans.

2.2. irudia: Barnekoa view of the MONTECH HS01 PRO PC Case, highlighting the spacious interior and fan placement.

I/O atakak:

Figure 2.3: Front I/O panel showing USB 3.0 ports, Type-C port, microphone jack, audio jack, power button, and LED button.

• USB 3.0 portuak: Bi portu abiadura handiko datuak transferitzeko.
• USB C motako ataka: One reversible Type-C connector.
• Audio-konektoreak: Separate microphone and headphone jacks.
• Pizteko botoia: Sistema pizteko/itzaltzeko.
• LED botoia: To cycle through ARGB lighting modes.

3. Konfigurazioa eta instalazioa

Follow these steps for proper installation of your PC components into the HS01 PRO case.

3.1 Reversible Layout Configuration

The HS01 PRO features a reversible design, allowing you to orient the case to display your build from either the left or right side. This involves re-orienting the internal components and panels.

Figure 3.1: The HS01 PRO case demonstrating its reversible layout capability, allowing for left or right side display.

Refer to the detailed instructions in the included physical manual for specific steps on reversing the layout, as it involves disassembling and reassembling certain internal structures.

3.2 Plaka amaierako instalazioa

The HS01 PRO supports Mini-ITX, Micro-ATX, and Standard ATX motherboards, including those with back-connect designs for cleaner cable management.

Figure 3.2: Diagram illustrating motherboard compatibility for Mini-ITX, Micro-ATX, and Standard ATX sizes within the case.

1. Remove the side panel by gently pulling it off (toolless design).
2. Install the necessary motherboard standoffs for your motherboard size.
3. Carefully place your motherboard onto the standoffs and secure it with screws.
4. Erabili ample cable routing options for a clean build, especially for back-connect motherboards.

3.3. irudia: Barnekoa view showing highlighted areas for back-connect motherboard support and cable management.

3.3 GPU Installation

The case supports modern GPU sizes and offers rotatable PCIe slots for vertical GPU mounting without additional accessories.

Figure 3.4: Illustration of the spacious interior supporting GPUs up to 420mm in length.

Figure 3.5: Comparison showing horizontal and vertical GPU mounting options using the rotatable PCIe slots.

1. For horizontal mounting, remove the necessary PCIe slot covers.
2. Insert your GPU into the PCIe slot on the motherboard and secure it with screws.
3. For vertical mounting, rotate the PCIe slot bracket and install your GPU using a compatible riser cable (sold separately).

3.4 Storage Installation

Kasuak eskaintzen du ample storage capacity for both HDDs and SSDs.

Figure 3.6: Diagrams showing locations for HDD and SSD installation within the case.

• Locate the dedicated mounting points for 3.5" HDDs and 2.5" SSDs.
• Lotu biltegiratze unitateak emandako torlojuak erabiliz.

3.5 Haizagailu eta erradiadorearen euskarria

The HS01 PRO comes with 5 pre-installed ARGB fans and offers flexible cooling compatibility.

Figure 3.7: Diagram showing fan and radiator support locations and sizes (Top, Rear, Front, Bottom).

• Goia: Supports 120/240/360mm radiators or 3x 120mm fans.
• Atzekoa: 2x 120 mm-ko haizagailu onartzen ditu.
• Aurrealdea: Supports 3x 120mm or 2x 140mm fans.
• Behea: Supports 120/240mm radiators or 3x 120mm fans.

The exterior-mounted rear fan design maximizes space for better cooling flexibility.

Figure 3.8: Image showing the repositioned rear fans for optimized cooling potential.

4. Funtzionamendu-argibideak

Once all components are installed and connected, you can begin operating your system.

4.1 Piztu/Itzaltzea

Press the power button located on the front I/O panel to turn your system on or off. A short press typically powers on, while a long press (4-5 seconds) will force a shutdown.

4.2 ARGB Argiztapen Kontrola

The pre-installed ARGB fans can be customized with 29 lighting modes. Use the LED button on the front I/O panel to cycle through these modes.

For advanced customization and synchronization with other ARGB components, connect the fan ARGB cables to your motherboard's ARGB header and use the motherboard manufacturer's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

5. Mantentzea

Mantentze-lan erregularrak zure ordenagailuaren kaxaren eta osagaien errendimendu optimoa eta iraupena bermatzen laguntzen du.

5.1 Kaxa garbitzea

• Kanpoaldea: Erabili biguna, damp kanpoko gainazalak garbitzeko zapi bat erabili. Saihestu garbitzaile urratzaileak.
• Hauts-iragazkiak: The HS01 PRO features removable dust filters on the mesh panels. Regularly remove and clean these filters with water and mild soap, or a vacuum cleaner, to maintain optimal airflow. Ensure they are completely dry before re-installing.
• Barrualdea: Use compressed air to blow out dust from inside the case, especially from fans and heatsinks. Perform this outdoors or in a well-ventilated area.

5.2 Aire-fluxuaren optimizazioa

The HS01 PRO is designed for high-airflow with its chimney-style cooling and vertical ventilation.

Figure 5.1: Illustration of the chimney-style cooling, showing airflow from bottom intake to top exhaust.

• Ensure all fans are spinning correctly and are free from obstructions.
• Maintain good cable management to prevent impeding airflow within the case.
• Regularly check and clean dust filters to prevent airflow restriction.

6. Arazoak

Atal honek zure ordenagailuaren kaxarekin izan ditzakezun arazo ohikoenei buruzkoa da.

6.1 Fans Not Spinning / ARGB Not Lighting Up

• Egiaztatu konexioak: Ensure all fan power cables (PWM) and ARGB cables are securely connected to the motherboard or a fan controller.
• Plaka basearen softwarea: If using motherboard software for ARGB control, ensure the software is installed and configured correctly.
• LED botoia: Try pressing the LED button on the front I/O panel to cycle through modes.
• Elikatze-iturria: Verify that your power supply unit (PSU) is providing adequate power to all components.

6.2 Sistemak ez du pizten

• Power Button Connection: Ensure the front panel power switch cable is correctly connected to the motherboard's front panel header.
• PSU Switch: Verify the power switch on the back of your PSU is in the "ON" position.
• Sare elektrikoa Check that the power cable is securely plugged into both the PSU and the wall outlet.
• Internal Connections: Double-check all internal power connections (24-pin ATX, CPU power, GPU power) to the motherboard and components.

6.3 Aire-fluxu eskasa / Tenperatura altuak

• Hauts-iragazkiak: Clean all dust filters regularly.
• Haizagailuaren orientazioa: Ensure fans are oriented correctly for optimal airflow (intake at bottom/front, exhaust at top/rear).
• Kableen kudeaketa: Improve internal cable management to reduce airflow obstruction.
• Osagaien tartea: Ensure there is adequate space around components, especially the GPU and CPU cooler, for proper air circulation.

7. Zehaztapenak

Detailed technical specifications for the MONTECH HS01 PRO PC Case.

8. Bermea eta Laguntza

MONTECH products are manufactured to high quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official MONTECH webgunea.

Bezeroarentzako laguntza:

If you encounter any issues or have questions regarding your MONTECH HS01 PRO PC case, please contact MONTECH customer support through their official webgunea edo zure produktuaren ontzian emandako harremanetarako informazioa.

For the latest drivers, software, and product information, please visit the official MONTECH webgunea: www.montechpc.com