GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard User Manual

Sarrera

This manual provides detailed instructions for the installation, operation, and maintenance of your GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard. Please read this manual thoroughly before installing or using the product to ensure correct operation and to prevent damage.

Konfigurazioa eta Instalazioa

Instalazioa hasi aurretik, ziurtatu sistema itzalita eta entxufetik deskonektatuta dagoela. Erabili eskumuturreko antiestatiko bat deskarga elektrostatikoek (ESD) osagaiei kalteak ez eragiteko.

Plaka nagusiaren diseinua

Familiarize yourself with the motherboard's layout and key components before proceeding with installation.

1. irudia: Goitik behera view of the GIGABYTE B760M AORUS Elite WIFI6E GEN5 Motherboard, showing the CPU socket, DIMM slots, PCIe slots, and M.2 slots.

2. irudia: Angelukoa view of the motherboard, highlighting the VRM heatsinks and M.2 thermal guards.

CPU Installation (LGA 1700)

1. Bilatu LGA 1700 CPU socket-a plaka basean.
2. Kargatzeko palanka astiro-astiro sakatu eta albo batera tira CPUaren socket-aren estalkia irekitzeko.
3. Lerrokatu CPUko marka triangeluarra socket-eko dagokion markarekin. Sartu CPUa socket-ean kontu handiz, indarrik gabe.
4. Close the load plate and push the load lever back into its locked position. The socket cover will pop off automatically.
5. Instalatu CPU hozkailua fabrikatzailearen argibideen arabera.

Memory (RAM) Installation

This motherboard supports DDR5 memory modules. For optimal performance, install memory modules in the recommended slots for dual-channel configuration.

1. Ireki DIMM zirrikituaren bi muturretan dauden klipak.
2. Lerrokatu DDR5 memoria-moduluko koska DIMM zirrikituan dagoen giltzarekin.
3. Insert the module firmly into the slot until the clips snap into place. Ensure both clips are fully closed.

Storage Device Installation (M.2 SSDs)

The motherboard features M.2 slots with EZ-Latch Plus for tool-less installation.

1. Locate the M.2 slots, typically covered by thermal guards.
2. Remove the M.2 thermal guard by unscrewing it (if applicable) or using the EZ-Latch mechanism.
3. Sartu M.2 SSDa zirrikituan 30 graduko angeluan.
4. Push the M.2 SSD down and secure it using the EZ-Latch Plus mechanism or the provided screw.
5. Reinstall the M.2 thermal guard to ensure proper cooling.

Graphics Card Installation (PCIe)

The primary PCIe 5.0 x16 slot features EZ-Latch for easy removal.

1. Open the retention clip at the end of the PCIe x16 slot.
2. Align your graphics card with the slot and press it down firmly until it clicks into place. Ensure the retention clip is closed.
3. Secure the graphics card to your PC case with screws.

Connecting Peripherals and Power

• Potentzia-konektoreak: Konektatu 24 pineko ATX elikatze-konektore nagusia eta 8 pineko CPU elikatze-konektorea elikatze-iturritik plaka basera.
• Aurreko paneleko konektoreak: Connect the power button, reset button, HDD LED, and front panel USB/audio headers to their respective pins on the motherboard. Refer to the motherboard diagram for exact locations.
• SATA gailuak: Connect SATA data cables from your storage drives (HDDs/SSDs) to the SATA ports on the motherboard, and connect SATA power cables from your power supply to the drives.
• Atzeko I/O panela: Connect your monitor, keyboard, mouse, and other USB devices to the appropriate ports on the rear I/O panel.

3. irudia: Rear I/O panel showing USB ports, Wi-Fi antenna connectors, HDMI, DisplayPort, 2.5GbE LAN, and audio jacks.

Wi-Fi antena instalatzea

The motherboard includes a Wi-Fi 6E module. Install the included antenna for wireless connectivity.

1. Locate the two antenna connectors on the rear I/O panel.
2. Screw the Wi-Fi antenna connectors onto the corresponding ports.
3. Position the antenna for optimal signal reception. The WIFI Compass feature can assist in finding the best orientation.

Funtzionamendu-argibideak

First Boot-Up and BIOS/UEFI Setup

1. Osagai guztiak muntatu ondoren, konektatu monitoreari, teklatuari eta saguari.
2. Entxufatu korronte-kablea eta piztu hornidura.
3. Sakatu zure ordenagailuaren kaxan dagoen pizteko botoia.
4. Abiarazteko prozesuan zehar, sakatu behin eta berriz tekla DEL BIOS/UEFI konfigurazio utilitatean sartzeko tekla.
5. In the BIOS, you can configure system settings, boot order, and enable features like XMP for your DDR5 memory.

Gidariaren instalazioa

After installing your operating system (Windows 10 or Windows 11), install the necessary drivers for optimal performance and functionality.

• Txip-multzoaren kontrolatzaileak: Essential for motherboard functionality.
• LAN gidariak: For 2.5GbE wired network connectivity.
• Wi-Fi Drivers: For Wi-Fi 6E wireless connectivity.
• Audio kontrolatzaileak: For sound output and input.
• Grafikoen kontrolatzaileak: Install drivers for your integrated or dedicated graphics card.

Gidariak GIGABYTE-ren webgune ofizialean aurki daitezke. webzure plaka basearen modelo espezifikorako gunea.

XMP Profile Aktibazioa

To achieve the rated speed of your DDR5 memory (up to 5600MHz), you may need to enable the Extreme Memory Profile (XMP) in the BIOS.

1. Enter the BIOS setup utility during boot.
2. Navigate to the memory settings section (often under "Tweaker" or "Advanced Memory Settings").
3. Locate the XMP profile option and enable it. Select the desired profile if multiple are available.
4. Gorde aldaketak eta irten BIOSetik.

Mantentzea

Mantentze-lan erregularrak zure plaka basearen eta sistemaren iraupena eta funtzionamendu egonkorra bermatzen laguntzen du.

Garbiketa

• Periodically clean dust from inside your PC case, especially around fans, heatsinks, and motherboard components.
• Use compressed air to gently blow away dust. Hold fans to prevent them from spinning rapidly during cleaning.
• Ziurtatu sistema itzalita eta deskonektatuta dagoela garbitu aurretik.

BIOS eguneraketak

GIGABYTE periodically releases BIOS updates to improve system stability, compatibility, and performance. Check the official GIGABYTE webzure modeloaren BIOS bertsio berrienak lortzeko webgunea.

• Deskargatu BIOS zuzena file for your motherboard model.
• Follow the instructions provided by GIGABYTE for updating the BIOS, typically using a utility within the BIOS or a dedicated flashing tool.
• Kontuz: Do not interrupt the BIOS update process, as this can render your motherboard inoperable.

Gidarien eguneraketak

Keep your system drivers updated to ensure optimal performance and compatibility with new software and hardware. Regularly check the GIGABYTE webeguneratutako gidariak lortzeko gunea.

Arazoak konpontzea

Atal honek aurki ditzakezun arazo ohikoenei irtenbideak eskaintzen ditu.

Energiarik ez / Abiorik ez

• Ziurtatu elikatze-kable guztiak (24 pineko ATX, 8 pineko CPU) plaka basera eta elikatze-iturrira ondo konektatuta daudela.
• Verify that the power supply is switched on and plugged into a working outlet.
• Check front panel connections (power button header) for correct installation.
• Try booting with minimal components (CPU, one RAM stick, graphics card if no integrated graphics) to isolate the issue.

Ez dago pantaila-irteerarik

• Ensure your monitor is connected to the correct display output (either motherboard's integrated graphics port or dedicated graphics card port).
• Verify that the graphics card is properly seated in its PCIe slot and has all necessary power cables connected.
• Test with a different monitor or display cable if possible.

Sistemaren ezegonkortasuna / Matxura

• Check CPU and GPU temperatures to ensure they are within safe operating limits.
• Verify that RAM modules are correctly installed and consider running a memory diagnostic tool.
• Ziurtatu gidari guztiak eguneratuta daudela.
• If XMP is enabled, try disabling it to see if memory stability improves.

BIOS Reset (Clear CMOS)

If you encounter issues after changing BIOS settings, you can reset the BIOS to its default settings.

1. Power off your system and unplug the power cord.
2. Locate the "Clear CMOS" jumper or button on the motherboard (refer to the motherboard diagram).
3. For a jumper, move the jumper cap from pins 1-2 to 2-3 for 5-10 seconds, then move it back to 1-2. For a button, press and hold it for 5-10 seconds.
4. Alternatively, remove the CMOS battery (CR2032) for 1-2 minutes, then reinsert it.
5. Plug in the power cord and power on the system.

Zehaztapenak

Bermea eta Laguntza

Bermeari buruzko informazio zehatza lortzeko, kontsultatu zure produktuarekin batera datorren berme-txartela edo bisitatu GIGABYTE-ren webgune ofiziala. webgunea. GIGABYTEk bere produktuen laguntza teknikoa eta baliabideak eskaintzen ditu.

• Lineako laguntza: Visit the GIGABYTE support website for FAQs, driver downloads, BIOS updates, and troubleshooting guides.
• Jarri harremanetan laguntzarekin: Refer to the GIGABYTE website for contact information for technical assistance.

Always ensure you have your product model number and serial number ready when contacting support.