Hobbywing QUICRUN WP 10BL120 SD G2 ESC & 3650 SD G2 Motor Combo Instruction Manual

1. Sarrera

1.1 Produktua gainditzeaview

This manual provides essential instructions for the proper setup, operation, and maintenance of your Hobbywing QUICRUN WP 10BL120 SD G2 Sensored Electronic Speed Controller (ESC) and 3650 SD G2 Brushless Motor Combo. This high-performance system is designed for remote-controlled vehicles, offering reliable and efficient power delivery. Please read this manual thoroughly before use to ensure optimal performance and safety.

1.2 Paketearen edukia

Upon opening your package, verify that all components are present:

• 1 x QUICRUN WP 10BL120 SD G2 ESC (Sensored)
• 1 x QUICRUN 3650 SD G2 Brushless Motor (with customizable Turn)
• Hobbywing eranskailuak
• Various Accessories (e.g., wires, connectors, heat shrink tubing)

Image: The Hobbywing QUICRUN WP 10BL120 SD G2 ESC and 3650 SD G2 Motor Combo, showcasing the electronic speed controller and brushless motor components.

2. Segurtasun-neurriak

Produktuari kalteak saihesteko eta erabiltzailearen segurtasuna bermatzeko ezinbestekoa da segurtasun-jarraibide hauek betetzea:

• Irakurri eskuliburua: Familiarize yourself with all instructions before operating the product.
• Konexio egokiak: Ensure all connections are correct and secure. Incorrect wiring can cause damage.
• Bateriaren segurtasuna: Use only compatible batteries. Observe correct polarity. Do not overcharge or short-circuit batteries.
• Beroaren kudeaketa: ESCs and motors can become hot during operation. Allow components to cool before handling.
• Uraren esposizioa: While the ESC is waterproof (WP), avoid prolonged submersion or exposure to corrosive liquids. Ensure all ports are sealed if applicable.
• Aireztapena: Ensure adequate airflow around the ESC and motor to prevent overheating.
• Haurrak: Keep the product and its components out of reach of small children.
• Desmihiztatu: Do not attempt to disassemble or modify the ESC or motor. This voids the warranty and can cause damage.

3. Konfigurazioa eta instalazioa

3.1 ESC Connection

Follow these steps to connect the ESC:

1. Motor konexioa: Connect the three motor wires (A, B, C) from the ESC to the corresponding motor phases. For sensored motors, connect the sensor cable from the motor to the ESC's sensor port. Ensure the sensor cable is oriented correctly.
2. Bateria konexioa: Konektatu ESCaren elikatze-sarrerako kableak (gorria positiborako, beltza negatiborako) bateria-multzoari. Ziurtatu polaritate zuzena dagoela.
3. Hargailuaren konexioa: Plug the ESC's throttle cable (usually a three-wire servo connector) into the throttle channel (CH2) of your receiver.
4. Cooling Fan (if applicable): If your ESC includes a cooling fan, connect it to the designated fan port on the ESC.

3.2 Motor-instalazioa

Mount the 3650 SD G2 motor securely in your vehicle's motor mount using appropriate screws. Ensure proper gear mesh between the motor pinion and the spur gear. Incorrect gear mesh can lead to excessive wear and heat.

3.3 Azeleragailuaren tartearen kalibrazioa

Before first use, the ESC's throttle range must be calibrated to match your radio transmitter. Refer to the detailed calibration procedure in the separate ESC manual or Hobbywing's official website for your specific ESC model. Generally, this involves:

1. Piztu transmisorea eta jarri azeleragailuaren trim-a neutro posizioan.
2. Hold the ESC's SET button, then turn on the ESC. Release the button when the LED flashes.
3. Set full throttle on your transmitter, press SET.
4. Set full brake/reverse on your transmitter, press SET.
5. Set neutral throttle on your transmitter, press SET.

4. Funtzionamendu-argibideak

4.1 Piztu/Itzaltzea

• Pizteko: Ensure all connections are secure. Turn on your radio transmitter first, then connect the battery to the ESC. Press the ESC's power button.
• Itzaltzeko: Disconnect the battery from the ESC. Then turn off your radio transmitter.

4.2 ESC Programazioa

The QUICRUN WP 10BL120 SD G2 ESC features programmable parameters to fine-tune its performance. These parameters can typically be adjusted using:

• The SET button on the ESC (limited parameters).
• A Hobbywing LED Program Box (recommended for full access to parameters).

Refer to the specific ESC manual for a complete list of programmable items and detailed instructions on how to adjust them.

5. Mantentzea

Regular maintenance ensures the longevity and optimal performance of your ESC and motor combo:

• Garbiketa: After each use, especially in dusty or dirty conditions, clean the ESC and motor with a soft brush or compressed air. Remove any debris that may impede cooling.
• Ikuskapena: Periodically check all wires and connectors for signs of wear, fraying, or corrosion. Ensure all screws are tight.
• Motoreko errodamenduak: Inspect motor bearings for smooth operation. If they feel rough, they may need cleaning or replacement.
• Biltegiratzea: Store the ESC and motor in a clean, dry place away from direct sunlight and extreme temperatures. Disconnect batteries when storing.

6. Arazoak

Atal honek aurki ditzakezun arazo ohikoenak jorratzen ditu:

7. Zehaztapenak

Key technical specifications for the Hobbywing QUICRUN WP 10BL120 SD G2 ESC and 3650 SD G2 Motor Combo:

8. Bermea eta Laguntza

8.1 Bermearen informazioa

Bermearen baldintza zehatzak ikusteko, jo Hobbywing-en webgune ofizialera. website or contact your local distributor. Warranty coverage typically applies to manufacturing defects and may vary by region.

8.2 Bezeroarentzako laguntza

If you encounter issues not covered in this manual or require further assistance, please visit the official Hobbywing support page or contact their customer service department. Provide your product model number (HWI38020382) and a detailed description of the issue for efficient support.