Actisense EMU-1 NMEA2000 Analog Engine Management Unit Instruction Manual

1. Sarrera

The Actisense EMU-1 is an Analog Engine Management Unit designed to convert traditional analog engine parameters into NMEA 2000 digital data. This unit allows for seamless integration of engine data with modern marine electronic systems, providing comprehensive monitoring capabilities on compatible NMEA 2000 displays.

The EMU-1 offers a flexible solution for various engine makes and models through its PC-based configuration tool. It measures a wide range of engine parameters, reporting operational data across the NMEA 2000 network. This simplifies the conversion process, reducing the complexity of wiring harnesses by consolidating multiple analog signals into a single digital stream.

An image showing the Actisense EMU-1 device with its clear casing, revealing internal components and screw terminal connections.

2. Konfigurazioa eta instalazioa

Proper installation of the EMU-1 is crucial for optimal performance. Follow these guidelines for setup:

2.1. Instalazio fisikoa

• Mount the EMU-1 in a secure location, protected from direct exposure to harsh elements, although the electronics are waterproof.
• Ziurtatu unitatearen inguruan aireztapen egokia dagoela.
• Connect the EMU-1 to the NMEA 2000 backbone using a standard NMEA 2000 drop cable.

2.2. Konexio elektrikoak

The EMU-1 features a two-part screw terminal connection system for easy and secure wiring to the engine harness.

• Gauge Inputs: Connect up to 6 analog gauge signals (e.g., oil pressure, water temperature). These connections are common ground referenced.
• Alarma sarrerak: Connect up to 4 alarm signals.
• Tacho Inputs: Connect up to 2 tachometer signals for RPM measurement and total engine time logging.
• Sarrera laguntzaileak: Two additional auxiliary inputs provide flexibility for other sensor types.

2.3. Konfigurazioa

The EMU-1 requires configuration using a PC-based tool to match the specific engine parameters. An Actisense NGT-1 NMEA 2000 PC Interface is recommended for this process.

• Connect the NGT-1 to your PC and the NMEA 2000 network.
• Use the Actisense configuration software to customize settings for your engine. This includes setting the engine instance for installations with multiple engines.
• Manual measurements are not required during configuration, simplifying the setup process.

3. Funtzionamendua

Once configured and installed, the EMU-1 operates by continuously monitoring the connected analog engine sensors and converting their signals into NMEA 2000 PGNs (Parameter Group Numbers). This data is then broadcast across the NMEA 2000 network, making it available to compatible displays and other NMEA 2000 devices.

• The unit reports engine operating parameters such as temperature, pressure, and RPM.
• It also supports the conversion of analog transmission parameters and battery status.
• Total engine time is logged using the tachometer inputs, providing valuable operational data.

4. Mantentzea

The Actisense EMU-1 is designed for reliability and requires minimal maintenance. However, periodic checks and updates are recommended to ensure continued optimal performance.

• Firmware eguneraketak: Firmware can be updated over the NMEA 2000 network using the Actisense NGT-1 and PC software. Regularly check the Actisense website for the latest firmware versions to benefit from improvements and new features.
• Konexioaren egiaztapenak: Periodically inspect all electrical connections for corrosion or looseness, especially in marine environments. Ensure the screw terminals are secure.
• Garbiketa: Keep the unit clean and free from excessive dust or debris. Use a soft, dry cloth for cleaning. Avoid harsh chemicals.
• Ingurumena babestea: While the electronics are sealed and waterproof, ensure the unit's mounting location continues to provide adequate protection from extreme physical impact or prolonged submersion beyond its rating.

5. Arazoak

If you encounter issues with your EMU-1, consider the following troubleshooting steps:

• No Data on NMEA 2000 Network:
  • Verify the EMU-1 is powered correctly.
  • Check all NMEA 2000 network connections, including terminators.
  • Ensure the EMU-1 is properly configured using the PC tool and NGT-1.
• Irakurketa okerrak:
  • Confirm that the analog sensors are correctly wired to the EMU-1 inputs.
  • Review the configuration settings in the PC tool to ensure they match your engine's sensor types and ranges.
  • Test the analog sensors directly if possible to rule out sensor malfunction.
• Configuration Tool Connection Issues:
  • Ensure the NGT-1 is correctly installed and its drivers are up to date on your PC.
  • Verify the NGT-1 is connected to the NMEA 2000 network and receiving power.
• Diagnostiko tresnak: Utilize the Actisense NGT-1 and NMEA Reader software on a PC for advanced diagnostics. This tool can display raw NMEA 2000 data, helping to identify communication issues or incorrect PGNs.

If problems persist after following these steps, contact Actisense support for further assistance.

6. Zehaztapenak

7. Bermea eta Laguntza

For detailed warranty information and technical support, please refer to the official Actisense website or contact your authorized Actisense dealer. Warranty terms typically cover manufacturing defects for a specified period from the date of purchase.

Actisense provides resources and contact information for customer assistance. Ensure you have your product model and serial number available when seeking support.