SeeYing Binilozko disko-jogailuaren erabiltzailearen eskuliburua

1. Desontziratzea eta kokatzea

Carefully remove all components from the packaging. Place the turntable on a flat, stable surface, away from speakers to minimize vibration feedback.

Image: The SeeYing Turntable SYB01 with its clear dust cover, showcasing the platter, tonearm, and controls. This is the main product view.

2. Platter and Belt Installation

1. Place the die-cast aluminum platter onto the turntable spindle.
2. Locate the rubber belt. Gently stretch the belt around the inner rim of the platter and hook it onto the motor pulley, which is visible through an opening in the platter.
3. Jarri estalkia zapiaren gainean.

Irudia: Gertutik view of the turntable's die-cast aluminum platter, showing the rubber belt wrapped around its inner rim and connected to the motor pulley. This illustrates the belt drive system.

3. Tonearm and Cartridge Setup

The AT3600L Moving Magnetic Cartridge is pre-installed. You will need to balance the tonearm and set the tracking force.

1. Besoa orekatu: Gently release the tonearm from its rest. Rotate the counterweight at the rear of the tonearm until the tonearm floats horizontally, parallel to the platter, without touching the surface.
2. Jarraipen-indarra ezarri: Once balanced, hold the counterweight steady and rotate the numbered ring on the counterweight to '0'. Then, rotate the entire counterweight (including the numbered ring) counter-clockwise until the desired tracking force is reached. Refer to the cartridge specifications for the recommended tracking force (typically 2.5-3.5 grams for the AT3600L).
3. Adjust Anti-Skate: Set the anti-skate dial to match the tracking force you set. This helps prevent the stylus from skipping inwards.

Irudia: Xehetasun zehatza view of the tonearm's adjustable counterweight with numerical markings, the pitch control knob, and the anti-skate dial. This image highlights the precision adjustments for optimal playback.

Image: A close-up of the AT3600L Moving Magnetic Cartridge attached to the tonearm, positioned over a vinyl record. This shows the stylus and cartridge assembly.

4. Audio konexioak

The turntable offers both Phono and Line output options, as well as a ground wire connection.

• Fono/Line etengailua: On the rear panel, select "PHONO" if connecting to an amplifier with a dedicated phono input. Select "LINE" if connecting to an amplifier or active speakers with a standard auxiliary input.
• RCA Audio Output: Use the included RCA cables to connect the turntable's "AUDIO OUT" jacks (Red for Right, White for Left) to your ampargitzaile edo hiztun aktiboak.
• Lurreko kablea: Konektatu biragailuaren lurrerako kablea zure lurrerako terminalera. amplifier (if available) to reduce hum.

Image: The rear panel of the turntable, clearly labeled with the Phono-Line Out Switch (1), RCA Jacks (2) for audio output, and the BT Out Button (3) for Bluetooth connectivity. This illustrates the various connection options.

5. Energia-konexioa

Connect the DC12V 0.2A power cord to the turntable's power input and then plug it into a wall outlet.

6. Hauts-estalkia

Attach the detachable dust cover to the hinges on the back of the turntable. This protects the platter and tonearm from dust when not in use.

1. Power On/Off and Speed Selection

The turntable features a speed selector knob. Rotate this knob to select 33 1/3 RPM for LPs or 45 RPM for singles. Turning the knob to the "OFF" position powers down the unit.

Image: The SeeYing turntable positioned between two external speakers, highlighting its belt-drive system and 2-speed capability (33 1/3 or 45 RPM). This shows the turntable in an operational setup.

2. Disko bat erreproduzitzea

1. Place a record on the platter, ensuring it is centered. Use the 45 RPM adapter for records with larger center holes.
2. Select the correct speed (33 1/3 or 45 RPM).
3. Lift the tonearm from its rest using the cueing lever.
4. Position the tonearm over the desired starting groove of the record.
5. Gently lower the tonearm using the cueing lever. The stylus will descend onto the record and playback will begin.
6. To stop playback, lift the tonearm using the cueing lever and return it to its rest.

3. Pitch Kontrola

The pitch control knob allows for slight adjustments to the playback speed. Rotate the knob to increase or decrease the speed as desired.

4. Bluetooth Output

Biragailuak audioa haririk gabe transmititu dezake Bluetooth gaitutako bozgorailuetara edo entzungailuetara.

1. Ensure your Bluetooth receiving device (speaker, headphones) is in pairing mode.
2. Press the "BT Out" button on the rear panel of the turntable. The Bluetooth indicator light will flash, indicating it is searching for a device.
3. Once connected, the indicator light will remain solid. Audio will now play through your Bluetooth device.

Image: The SeeYing turntable shown alongside a wireless headphone and a wireless speaker, with a graphic indicating wireless signal transmission. This illustrates the Bluetooth output capability for connecting to external audio devices.

1. Cleaning the Stylus

Regularly clean the stylus using a soft brush designed for stylus cleaning. Brush gently from back to front to remove dust and debris. A dirty stylus can degrade sound quality and damage records.

2. Cleaning the Turntable Unit

Wipe the turntable's surface and dust cover with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp zapi bat erabil daiteke, eta ondoren zapi lehor bat. Saihestu garbitzaile edo disolbatzaile urratzaileak.

3. Record Care

Keep your vinyl records clean and free of dust. Store them vertically in their sleeves to prevent warping. Handle records by their edges to avoid transferring oils from your skin to the playing surface.