1. Sarrera
This manual provides detailed instructions for the safe and efficient operation, maintenance, and care of your TENKER CM5520 Espresso Machine with Grinder. Please read this manual thoroughly before first use and retain it for future reference.

Figure 1: TENKER CM5520 Espresso Machine with Grinder
2. Segurtasun-argibide garrantzitsuak
- Irakurri argibide guztiak aparatua martxan jarri aurretik.
- Ez murgildu gailua, kablea edo entxufea uretan edo beste likido batzuetan.
- Ensure the appliance is placed on a stable, level surface, away from hot surfaces or open flames.
- Deskonektatu aparatua entxufetik erabiltzen ez duzunean eta garbitu aurretik.
- Ez erabili aparaturik kablea edo entxufea hondatuta dagoenean, edo aparatuak gaizki funtzionatzen duenean edo nolabait hondatu ondoren.
- Erabili fabrikatzaileak gomendatutako osagarriak soilik.
- Exercise extreme caution when using the steam wand, as hot steam can cause burns.
- Mantendu haurrak gailutik urrun funtzionatzen ari diren bitartean.
3. Paketearen edukia
Egiaztatu elementu guztiak paketean daudela:
- TENKER CM5520 Espresso Machine with Grinder
- Portairagazkia
- One Shot Filter
- Tiro bikoitzeko iragazkia
- Solid Stainless Steel Tamper
- Esne pitxerra
- Koilara
- Powder Ring
- Garbiketa eskuila

2. irudia: Osagarriak barne
4. Produktua amaitu daview
The TENKER CM5520 is an all-in-one espresso machine featuring an integrated grinder, 20 Bar pump, and milk frother. Key components include:
- Bean Hopper: Kafe ale osoetarako.
- Ehotzeko tamaina hautatzailea: Adjusts coffee grind fineness.
- Kontrol-panela: LED touchscreen for operation.
- Portafilter Holder: Where the portafilter is attached.
- Lurrun-makila: Esnea aparra egiteko eta ur beroa emateko.
- Tantaketarako erretilua: Gehiegizko likidoa biltzen du eta garbitzeko kendu daiteke.
- Ur depositua: Erraz betetzeko kendu daiteke.
- Cup Warmer Plate: Makinaren goialdean kokatuta dago edalontziak aldez aurretik berotzeko.

Figure 3: Cup Warmer Plate

Figure 4: Removable Drip Tray
5. Konfigurazioa
5.1 Initial Cleaning and Flushing
Before first use, it is recommended to flush the system to remove any manufacturing residues. Fill the water tank, run hot water through the steam wand, and brew a few cycles without coffee grounds.
5.2 Filling Water and Coffee Beans
- Ensure the steam knob on the right side of the machine is in the OFF position.
- Remove the water tank from the back of the machine and fill it with fresh, cold water. Reinsert the tank securely.
- Open the bean hopper lid and fill it with whole coffee beans. Close the lid.
- Entxufatu korronte-kablea entxufe elektriko egoki batean.

Figure 5: Step 1 - Fill Water and Coffee Bean, Turn On
6. Funtzionamendu-argibideak
6.1 Kafea ehotzea
- Place the portafilter with the powder ring in position under the grinder outlet.
- Adjust the grind size using the selector dial. Settings range from 1 (coarse) to 30 (fine). For espresso, a finer grind (typically between 7 and 15) is recommended.
- Press the 'Grinder' button once for a single shot grind, or twice for a double shot grind. The machine will automatically dose the coffee grounds.

Figure 6: Adjustable Burr Grinder for Personalized Coffee

Figure 7: Step 2 - Make Coffee Powder
6.2 Installing the Portafilter
Ehotu ondoren, tamp the coffee grounds firmly using the included tamper. Install the portafilter handle correctly into the group head and rotate it to lock it securely in place.

Figure 8: Step 3 - Install the Portafilter
6.3 Espressoa prestatzea
The machine features PID temperature control for precise 92°C extraction and pre-infusion technology for optimal flavor.

Figure 9: Pre-Soaking Technology

Figure 10: PID + NTC Dual-Sensing Temperature Control
6.3.1 Making Cold Espresso
- Place your cup under the portafilter.
- Press the 'Cool Espresso' button once for a single shot, or twice for a double shot. The machine will begin brewing.

Figure 11: Step 4 - Make Cool Espresso
6.3.2 Making Hot Espresso or Americano
- Place your cup under the portafilter.
- Press the 'Hot Espresso' button once to start the heating process.
- Once the heating progress bar is fully lit, press either the 'Hot Espresso' button or the 'Americano' button to begin brewing.

Figure 12: Step 5 - Heating and Make Hot Espresso or Americano
6.4 Lurrun-haga erabiltzea
The steam wand can be used to froth milk for lattes and cappuccinos, or to dispense hot water.
- Ensure the steam knob on the right is turned to the OFF position before starting.
- To dispense hot water: Once the heating progress bar is full, turn the right-hand steam knob fully downward. Hot water will be dispensed from the wand.
- To activate steam for frothing: Press the 'Steam' button first. After the machine heats up, turn the right-hand steam knob fully downward to activate the steam.
- Always ensure the right-hand steam knob is turned fully downward for either hot water or steam.

Figure 13: Step 6 - Steam Function
7. Mantentzea
7.1 Eguneko garbiketa
- Tantaketarako erretilua: Empty and clean the drip tray regularly. It is removable for easy cleaning.
- Portafiltroa eta iragazkiak: After each use, remove the portafilter and discard the coffee puck. Rinse the portafilter and filter basket under running water.
- Lurrun-makila: Esnea aparra egin ondoren, garbitu lurrun-hagaxka urarekin.amp cloth to prevent milk residue from drying. Purge the wand briefly to clear any internal milk residue.
- Grinder Exit Chute: Wipe the grinder exit chute to ensure zero retention and prevent clogs.
- Kanpoaldea: Garbitu makinaren kanpoaldea leun batekin, damp oihal. Ez erabili garbitzaile urratzaileak edo zurgatzaileak.

Figure 14: Zero-Retention Grinding Technology
7.2 Kalifikatzailea
Regular descaling is essential to maintain the performance and longevity of your espresso machine, especially in areas with hard water. Refer to the full product manual for detailed descaling instructions and recommended descaling solutions.
8. Arazoak
If you encounter issues with your TENKER CM5520, please refer to the following common solutions:
- Potentziarik gabe: Ensure the power cord is securely plugged into a working outlet and the machine is switched on.
- Ur-fluxurik ez: Check if the water tank is filled and properly seated. Ensure no air bubbles are trapped in the system by running hot water through the steam wand.
- Kafea ez da prestatzen: Verify the portafilter is correctly installed and locked. Check if the water tank is empty.
- Weak Espresso/Too Fast Flow: Adjust the grind size to be finer and ensure the coffee is tamped irmoki.
- Lurrun-hagatxoak ez du lurruna sortzen: Ensure the 'Steam' button has been pressed and the machine has heated up sufficiently before turning the steam knob. Check for blockages in the steam wand nozzle.
- Soupy Coffee Puck: This can sometimes occur with pressurized portafilters. Ensure proper grind size and tamping. A third-party puck screen may help.
For further assistance, please contact TENKER customer support.
9. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Marka | TENKER |
| Ereduaren izena | CM5520 |
| Kolorea | Beltza |
| Produktuaren neurriak | 10" L x 7.8" W x 14" H |
| Ezaugarri bereziak | Integrated Coffee Grinder, Milk Frother, Removable Water Tank, PID Control |
| Kafe-makina mota | Espresso Makina |
| Eragiketa modua | Erdiautomatikoak |
| liburukiatage | 120 Volt |
| Kafearen sarrera mota | Babarrun osoa |
| Elementuaren pisua | 12 kilo |
| Ponpa Presioa | 20 Taberna |
| Boterea | 1350W |
10. Bermea eta Laguntza
Your TENKER CM5520 Espresso Machine with Grinder is protected by a 12 hilabeteko bermea from the date of purchase. This warranty covers manufacturing defects and ensures the quality and reliability of your machine.
For technical support, warranty claims, or any questions regarding your product, please contact TENKER customer service. Contact information can typically be found on the TENKER official webgunea edo zure erosketa plataformaren bidez.





