ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Sarrera

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

1.1. irudia: Aurrealdea view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Segurtasun informazioa

Sute, deskarga elektriko edo lesio pertsonalen arriskua murrizteko, jarraitu beti oinarrizko segurtasun neurri hauek:

• OHARRA: Deskarga elektrikoaren arriskua. Deskonektatu korrontea fusiblean edo etengailutik instalatu edo zaindu aurretik.
• Produktu hau instalazio-kode aplikagarriaren arabera instalatu behar du produktuaren eraikuntza eta funtzionamendua eta dakartzan arriskuak ezagutzen dituen pertsona batek.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• Ziurtatu konexio guztiak seguru eta behar bezala isolatuta daudela.
• Aparailu hau barrualdean erabiltzeko egokia da soilik.

3. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Muntatzeko hardwarea (torlojuak, kable-azkoinak)
• E26 Adapter Accessories (for recessed can installation)
• Argibide eskuliburua (dokumentu hau)

Image 3.1: Included accessories for installation.

4. Produktuaren ezaugarriak

• 3CCT Selectable: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Mugimendu-sentsorea: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Doikuntza-denbora atzeratzea: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Argi-sentsorea: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Energia eraginkorra: 16W LED provides 1000 lumens of brightness.
• Instalazio polifazetikoa: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Konfigurazioa eta instalazioa

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Kendu lentea erlojuaren orratzen norantz biratuz.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Kendu lentea erlojuaren orratzen norantz biratuz.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Funtzionamendu-argibideak

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Mugimendu-sentsorearen funtzionaltasuna

• Egunez: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Ziurtatu boterea itzalita dagoela.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Denbora-atzerapenaren doikuntza

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Ziurtatu boterea itzalita dagoela.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Mantentzea

The ECOELER LED ceiling light requires minimal maintenance.

• Garbiketa: Ziurtatu argindarra itzalita dagoela garbitu aurretik. Garbitu aparatua zapi leun, lehor edo apur bat lehor batekin.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Lentea: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Arazoak

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Zehaztapenak

10. Bermea eta Laguntza

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webgunea.

Fabrikatzailea: ECOELER ELECTRIC INC