Oneach Boho Floor Lamp with Remote & Dimmable Bulb (Model: AMZ-F1244WT-RC)

1. Segurtasun informazioa

Ziurtatu lamp is unplugged before assembly, cleaning, or replacing the bulb.
Ez gainditu gehienezko wat-atage specified for the bulb (Max 60W or Max 9W LED).
Jarri lamp gainazal egonkor eta lau batean, iraultzea saihesteko.
Mantendu lamp ura eta hezetasunetik urrun.
Do not use harsh chemicals or abrasive cleaners on the lamp.
Mantendu haurren eta maskoten eskura.

Muntaketa hasi aurretik, egiaztatu osagai guztiak daudela.

2.1. irudia: barne dauden osagaiak

Follow these steps to assemble your Oneach Boho Floor Lamp. Assembly typically takes less than 10 minutes.

3.1. irudia: Muntaketa urratsak

Erantsi Lamp Oinarria: Carefully insert the first section of the lamp gorputza l sartuamp base. Rotate clockwise until securely tightened. Ensure the power cord passes through the center of the base.
Muntatu Lamp Gorputza: Connect the remaining sections of the lamp body one by one, rotating each section clockwise until firmly connected. Guide the power cord through each section as you assemble.
Instalatu Lampitzala: Behin lamp body is fully assembled, locate the plastic ring on the lamp holder. Unscrew this ring, place the rattan lampl gainean itzalaamp holder, and then screw the plastic ring back on to secure the lampitzala.
Insert the Light Bulb: Screw the provided E26 smart dimmable bulb into the lamp entxufea.
Konektatu energiara: Entxufatu lampren elikatze-kablea entxufe elektriko estandar batera konektatu.

Your Oneach Boho Floor Lamp can be operated using the included remote control or the integrated foot switch.

The remote control offers comprehensive control over the lamp's settings. Ensure 2 AAA batteries (not included) are installed in the remote.

Figure 4.1: Remote Control and Dimmable Bulb

Aktibatu/Desaktibatuta: Sakatu pizteko botoia l piztekoamp piztu edo itzali.
Brightness Adjustment (1%-100%): Use the brightness increase (+) and decrease (-) buttons to adjust the light intensity.
Color Temperature Adjustment (3000K-6000K): Use the color temperature increase (K+) and decrease (K-) buttons to cycle through warm white (3000K), natural white (4000K), and cool white (6000K) settings.
Aurrez ezarritako moduak: The remote includes buttons for various scene modes such as Read, Nursery, Work, and Night Light.
Tenporizadorearen ezarpena: Press the '1H' button to activate a 1-hour timer, after which the lamp automatikoki itzaliko da.
Memoria Funtzioa: Lamp will remember the last brightness and color temperature setting used when turned back on.

Lamp also features a convenient foot switch located on the power cord for basic on/off control.

Aktibatu/Desaktibatuta: Press the foot switch to toggle the lamp piztu edo itzali.

Garbiketa: Disconnect the power before cleaning. Wipe the metal parts with a soft, dry cloth. For the rattan shade, gently dust with a soft brush or cloth. Do not use liquid cleaners or sprays directly on the lamp.
Bonbillaren ordezkoa: Ziurtatu lamp is unplugged and the bulb has cooled before attempting to replace it. Use only E26 base bulbs, not exceeding 60W incandescent or 9W LED.
Biltegiratzea: l gordez geroamp, disassemble it carefully and store in its original packaging in a dry place to protect components.

Arazoa	Kausa posiblea	Irtenbidea
Lamp ez da pizten.	Ez dago energia konexiorik.	Egiaztatu elikatze-kablea ondo konektatuta dagoen entxufe funtzional batera.
	Bonbilla solte edo akastuna dago.	Tighten the bulb or replace it with a new E26 bulb.
	Foot switch or remote control issue.	Ensure the foot switch is pressed. For remote, check batteries and ensure line of sight.
Urruneko kontrola ez dabil.	Bateriak agortuta daude edo gaizki sartuta daude.	Replace batteries (2 AAA) and ensure correct polarity.
	Urruneko eta l arteko oztopoaamp.	Ensure there is a clear path between the remote and the lamphartzailea.
Brightness or color temperature not adjusting.	Remote control issue.	Refer to remote control troubleshooting steps above.

Modelo zenbakia: AMZ-F1244WT-RC
Produktuaren neurriak: 21" L x 13" W x 62.5" H
Lamp Mota: L solairuaamp
Estiloa: Walnut wood-Remote
Marka: Banaka
Kolorea: Remote Control - Walnut with Woven Lampitzala
Ezaugarri berezia: Corded, Dimmable, 3 Color Temperatures, Remote Control, Foot Switch
Argi iturri mota: LED (E26 Smart Dimmable Bulb included)
Max Wattage: 60W (incandescent) or 9W (LED)
Materiala: Metala, Rotanga
Elementuaren pisua: 11.36 kilo
Urruneko behar diren bateriak: 2 x AAA (ez dago barne)

This Oneach floor lamp comes with a 1-year after-sale warranty. For any product concerns or support, please contact Oneach customer service.

Babes-plan gehigarriak eros daitezke:

	KDG LED Lamp Argibideen eskuliburua eta produktuaren informazioa KDG LED L-rako gida osoaamp (AMZ-TBL-036), Zhongshan Cook Lighting-en produktuaren zehaztapenak, kargatzea, argiaren erregulazioa, urrutiko agintea, neurriak, FCCren betetzea eta bermearen xehetasunak biltzen dituena.
	L taulaamp User Manual - Model AMZ-T1092 Assembly and Care Comprehensive user manual for the AMZ-T1092 table lamp by George Oliver, including assembly instructions, caution notices, and warranty information.
	Danfoss AMZ 112, AMZ 113 Operating Guide This document provides an operating guide for the Danfoss AMZ 112 and AMZ 113 motorized zone valves, covering installation, wiring, and function.
	Designing Hydronic Floor Heating: Get Optimum Results with Danfoss Systems Comprehensive application guide from Danfoss on designing and installing efficient hydronic floor heating systems. Covers system types, pipe layout, screed selection, and component compatibility.
	VEVOR RC-9001 hustubide-garbigailu elektrikoaren erabiltzailearen eskuliburua VEVOR RC-9001 hustubide-garbigailu elektrikoaren erabiltzailearen eskuliburu osoa, segurtasun-argibideak, konfigurazioa, funtzionamendua, mantentze-lanak eta arazoak konpontzea biltzen dituena.
	Danfoss Zónové ventily AMZ 112, AMZ 113: Datasheet a Technické Údaje Kompletní technický list a specifikace pro zónové ventily Danfoss ZAP/VYP AMZ 112 a AMZ 113. Zahrnuje aplikace, objednávací kódy, principy použití, technické údaje, rozměry a instalační pokyny.