LEDOne Corp LED Wall Pack Instruction Manual

1. Sarrera

This manual provides comprehensive instructions for the installation, operation, and maintenance of the LEDOne Corp Multi-Watt LED Wall Pack. This fixture is designed for demanding outdoor lighting applications, offering selectable wattage (80W, 100W, 120W) and adjustable color temperature (3000K, 4000K, 5000K) to meet various lighting requirements efficiently.

2. Segurtasun informazioa

WARNING: Risk of electric shock. Installation must be performed by a qualified electrician in accordance with all national and local electrical codes.

• Deskonektatu korrontea etengailu elektrikoan instalazioa edo mantentze-lanak egin aurretik.
• Ziurtatu hornidura boltage bateragarria da aparatuaren funtzionamendu-bolumenarekintage (120-277V).
• Do not handle energized fixtures with wet hands or when standing on wet or damp gainazalak.
• Use only UL/ETL approved components and wiring methods.
• Ensure the fixture is securely mounted to prevent falling.
• Ez begiratu zuzenean LED argi-iturria piztuta dagoenean.

3. Paketearen edukia

Instalazioa hasi aurretik, egiaztatu osagai guztiak daudela:

• LEDOne Corp LED Wall Pack Fixture
• Argibide eskuliburua (dokumentu hau)
• Muntatzeko Hardwarea

4. Zehaztapenak

5. Konfigurazioa eta instalazioa

The LEDOne Corp Wall Pack is designed for wall mounting and compatibility with standard junction boxes. Follow these steps for secure installation:

1. Prestaketa: Ensure power is disconnected at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, drill, mounting hardware).
2. Muntatzeko kokapena: Select a suitable wall surface capable of supporting the fixture's weight (approximately 10.63 lbs). The fixture features reinforced mounting points.
3. Muntatzeko euskarria: Attach the wall mount bracket (if separate) or position the fixture directly over the junction box. Mark and drill pilot holes for the mounting screws.
4. Gailu segurua: Secure the fixture to the wall using the provided mounting hardware. Ensure it is firmly attached and level.
5. Kableatua: Open the wiring compartment. Connect the fixture's wires to the supply wires from the junction box:
   • Black wire to Line (L)
   • White wire to Neutral (N)
   • Green wire to Ground (G)
   Use the provided waterproof wire nuts for secure outdoor connections. For 0-10V dimming, connect the purple wire to DIM+ and the gray wire to DIM-.
6. Itxi konpartimentua: Carefully tuck all wires into the junction box and wiring compartment. Close and seal the compartment cover to maintain IP65 rating.
7. Piztu: Berrezarri potentzia etengailuan eta probatu aparatua.

1. irudia: Atzekoa view of the LED wall pack, illustrating the mounting points and the central access for electrical wiring connections.

2 irudia: Alboko profile of the LED wall pack, showing the robust construction and a visible screw for secure mounting.

6. Funtzionamendu-argibideak

The LEDOne Corp Wall Pack features adjustable wattage and color temperature settings, typically controlled by internal switches. These switches are usually located within the wiring compartment or on the side of the LED driver housing, accessible after opening the fixture.

3. irudia: Aurrealdea view of the LED wall pack with the protective lens removed, revealing the array of LED chips and the internal switches for adjusting wattage eta CCT.

1. Wat doitzeatage:
   • Ensure power is disconnected before opening the fixture.
   • Kokatu wattage selection switch (often labeled WATT or POWER).
   • Aukeratu nahi duzun wattage: 80W, 100W, or 120W.
   • Close the fixture securely before restoring power.
2. Adjusting Color Temperature (CCT):
   • Ensure power is disconnected before opening the fixture.
   • Locate the CCT selection switch (often labeled CCT or TEMP).
   • Select the desired color temperature: 3000K (warm white), 4000K (cool white), or 5000K (daylight).
   • Close the fixture securely before restoring power.
3. 0-10V iluntzea: This fixture supports 0-10V dimming. Connect a compatible 0-10V dimmer to the purple (DIM+) and gray (DIM-) wires during installation.
4. Photocell/Motion Sensor: The fixture may include or be compatible with external photocells or motion sensors for automated operation. Refer to the specific sensor's instructions for integration.

4. irudia: Angelua view of the LED wall pack, showcasing its complete assembly and the illuminated LED array.

7. Mantentzea

The LEDOne Corp Wall Pack is designed for minimal maintenance. Regular inspection and cleaning will ensure optimal performance and longevity.

• Garbiketa: Periodically clean the outer lens and housing with a soft, damp cloth to remove dirt, dust, and debris. Do not use abrasive cleaners or solvents. Ensure power is off before cleaning.
• Ikuskapena: Annually inspect the fixture for any signs of physical damage, loose connections, or wear on the wiring. Address any issues promptly.
• Zigiluak: Ensure all seals and gaskets are intact to maintain the IP65 weatherproof rating.

8. Arazoak

If the fixture is not operating correctly, refer to the following common issues and solutions:

If troubleshooting steps do not resolve the issue, contact LEDOne Corp customer support.

9. Bermearen informazioa

The LEDOne Corp Multi-Watt LED Wall Pack is backed by a comprehensive 5 urteko bermea. This warranty covers defects in materials and workmanship under normal use and service. For warranty claims or detailed terms and conditions, please contact LEDOne Corp customer support.

10. Laguntza eta Kontaktua

For further assistance, technical support, or inquiries regarding your LEDOne Corp product, please visit the official LEDONE Store or contact customer service:

Visit the LEDONE Store on Amazon