JDIAG HD10 Kamioi eta Auto Astunentzako Diagnostiko Eskaneatze Tresnaren Erabiltzaile Eskuliburua

1. Sarrera

The JDIAG HD10 is a versatile diagnostic scan tool designed for comprehensive analysis of both 12V gasoline/diesel vehicles and 24V diesel heavy-duty trucks. This device supports a wide range of diagnostic functions, including reading and clearing Diagnostic Trouble Codes (DTCs), displaying live data, and performing various system checks. Its ergonomic design and user-friendly interface aim to provide efficient vehicle diagnostics.

Figure 1: JDIAG HD10 Diagnostic Scan Tool with included 6-pin and 9-pin adapters.

2. Segurtasun informazioa

Always observe the following safety precautions when operating the JDIAG HD10 diagnostic tool:

• Ensure the vehicle is in a safe, well-ventilated area.
• Wear appropriate personal protective equipment, such as eye protection.
• Avoid contact with hot engine components or moving parts.
• Do not operate the tool while driving.
• Keep the tool dry and away from extreme temperatures.
• Refer to the vehicle's service manual for specific diagnostic procedures and warnings.

3. Paketearen edukia

Egiaztatu elementu guztiak paketean daudela:

• HD10 heavy duty scanner tool
• 6-pin adapter (for trucks)
• 9-pin adapter (for trucks)
• USB datu-kablea
• Erabiltzailearen eskuliburua

4. Gailua amaitu daview

The JDIAG HD10 features a 2.4-inch color screen and intuitive button layout for easy navigation. Its robust design includes non-slip grips and a durable integrated cable.

Figure 2: Ergonomic design features including silicone buttons, non-slip sides, durable cable, and OBD2 connector.

Figure 3: Main menu interface of the HD10 device.

4.1. Ezaugarri fisikoak

• Pantaila: 2.4-inch TFT Color Screen (320 x 240 resolution).
• Botoiak: Clearly arranged silicone physical buttons for high sensitivity and fast response.
• Etxebizitza: Anti-slip design on both sides for secure handling.
• Kablea: Integrated, thick, and durable wire (up to 105 cm).
• Konektoreak: Standard OBD2 connector, with included 6-pin and 9-pin adapters for heavy-duty vehicles.

5. Konfigurazioa

5.1. Ibilgailura konektatzea

1. Locate the vehicle's Diagnostic Link Connector (DLC). For 12V vehicles, this is typically a 16-pin OBD2 port. For heavy-duty 24V vehicles, it will be a 6-pin or 9-pin connector.
2. If diagnosing a heavy-duty vehicle, attach the appropriate 6-pin or 9-pin adapter to the HD10's main cable, then connect to the vehicle's DLC. For 12V vehicles, connect the standard OBD2 connector directly.
3. Ensure the connection is secure. The device will power on automatically once connected to the vehicle's power supply.

Figure 4: The HD10 displaying live data, illustrating its 2.4-inch color screen.

5.2. Hasierako ezarpenak

Upon first use or after a reset, you may need to configure basic settings:

• Nabigatu Konfigurazioa menu using the directional buttons and press OK.
• Hautatu Hizkuntza to choose your preferred language.
• Other settings like unit of measurement (e.g., Metric/Imperial) may also be available in the Setup menu.

6. Funtzionamendu-argibideak

The JDIAG HD10 offers various diagnostic functions accessible through its main menu.

6.1. Menu nagusiko nabigazioa

Erabili norabide-botoiak (Up, Behera, Ezkerra, Eskuin) to highlight menu options and press the OK button to confirm a selection. The Itzuli button (curved arrow) navigates back to the previous screen.

6.2. HD OBD (Heavy Duty On-Board Diagnostics)

This mode is for diagnosing heavy-duty trucks and supports protocols like SAE J1939, SAE J1587/J1708, ISO15765, ISO 14230, and ISO 9141-2.

Figure 5: Full system diagnostic capabilities for heavy-duty vehicles.

• Irakurri kodeak: Retrieves Diagnostic Trouble Codes (DTCs) from various vehicle systems (Engine, Transmission, Drivetrain, Suspension, Braking System, Cab Climate, Body Control, Dashboard, Fuel System, etc.).
• Ezabatu kodeak: Clears DTCs from the vehicle's computer after repairs have been made.
• Zuzeneko datuak: Displays real-time operational parameters of the vehicle's systems.
• Sistemaren diagnostikoa osoa: Accesses and diagnoses all supported electronic control units (ECUs) in 24V diesel vehicles.

6.3. OBDII (Standard On-Board Diagnostics)

This mode is for diagnosing 12V gasoline/diesel vehicles and supports standard OBD2 protocols including SAE J1850.

6 Irudia: Gainetikview of full OBD2 functions available.

• Irakurri kodeak: Retrieves current, pending, and permanent DTCs.
• Ezabatu kodeak: DTCak ezabatzen ditu eta matxura-adierazlea itzaltzen du Lamp (MIL).
• I / M prest egotea: Checks the readiness of emission-related monitors.
• Datu korrontea: Sentsoreen datuak testu edo grafiko formatuan bistaratzen ditu zuzenean.
• Izoztu markoa: Records a snapshot of vehicle conditions when an emission-related fault occurs.
• O2 sentsoreen proba: O2 sentsorearen monitorizazio-proben emaitzak berreskuratzen ditu.
• Ontziko monitorizazioa: Osagai/sistema espezifikoen ontziko diagnostiko-monitorizazio proben emaitzak berreskuratzen ditu.
• EVAP sistemaren proba: Lurruntze-isurien kontrol sistemaren proba abiarazten du.
• Ibilgailuen informazioa: Displays the vehicle's Vehicle Identification Number (VIN), Calibration ID (CALID), and Calibration Verification Number (CVN).

6.4. DTC Bilaketa

The built-in DTC Lookup function allows you to search for definitions of diagnostic trouble codes directly on the device, helping to understand the nature of a fault without external resources.

6.5. CAN Node Detection

This function helps quickly detect CANBUS nodes and identify faulty modules or lines by checking existing nodes, improving diagnostic efficiency.

6.6. BAT Test (Battery Test)

The BAT Test function allows for basic battery voltage checks, providing quick insights into the vehicle's battery health.

6.7. Software eguneratzea

The JDIAG HD10 supports lifetime free software updates. Connect the device to a computer via the USB data cable and follow the instructions on the manufacturer's website to download and install the latest software. This ensures expanded fault coverage and up-to-date functionality.

7. Mantentzea

7.1. Garbiketa

Garbitu gailua leun batekin, damp oihalik. Ez erabili garbitzaile edo disolbatzaile urratzailerik. Ziurtatu gailua lehor dagoela gorde edo hurrengo erabilera egin aurretik.

7.2. Biltegiratzea

Store the JDIAG HD10 in a clean, dry environment, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case when not in use to prevent damage.

8. Arazoak

9. Zehaztapenak

• Marka: JDIAG
• Eredua: HD10 (Item model number) / CC0147HD10 (Manufacturer Model)
• Sistema eragilea: Linux
• Automobilgintzako egokitzapen mota: Egokitze unibertsala
• Supported Protocols (Heavy Duty): SAE J1939, SAE J1587/J1708, ISO15765, ISO 14230, ISO 9141-2
• Supported Protocols (OBD2): SAE J1850 (VPW/PWM), ISO9141, ISO14230 (KWP), ISO15765-4 (CAN)
• Pantaila: 2.4 hazbeteko TFT koloretako pantaila
• Elementuaren pisua: 1.15 kilo
• Paketearen neurriak: 7.48 x 6.69 x 1.57 hazbete

Figure 7: Compatibility table for various heavy-duty truck brands and protocols.

10. Bermearen informazioa

For detailed warranty information regarding your JDIAG HD10 diagnostic tool, please refer to the documentation included with your purchase or contact JDIAG customer support directly. Protection plans may be available for extended coverage.

11. Laguntza

If you encounter any issues or have questions regarding the operation of your JDIAG HD10, please contact the JDIAG technical support team. They are available to provide assistance and operational guidance.

• Fabrikatzailea: JDIAG
• Laguntza teknikoa: Refer to the contact information provided in your product packaging or on the official JDIAG webgunea.