1. Produktua amaitu daview
The VEVOR 800W Snow Machine is designed to create realistic snow-like foam for various events and settings. This portable unit features a high-power motor and adjustable output settings for versatile use.
- High-Power Snow Machine: Features an upgraded 800W motor with a 33,600 RPM fan, spraying up to 11.48 ft (3.5 m) and covering 10m².
- Freely Adjustable Output: Rear-mount control switch allows adjustment of snow volume and flake size. Includes a wireless remote with a range of up to 32.8 ft.
- Secure & Durable Build: Constructed from corrosion-resistant SPCC steel with a painted finish. Ventilation slots and a grounded plug prevent overheating.
- Easy to Use & Transport: Ready to use with included accessories and a carry handle. No preheating required.
- Aplikazio zabala: Ideal for festivals, weddings, parties, stage shows, and commercial displays.
Figure 1: VEVOR 800W Snow Machine
Figure 2: Snow machine demonstrating its output capabilities and key features.
2. Segurtasun-argibideak
- Always connect the machine to a grounded power outlet.
- Use only VEVOR-approved snow fluid. Do not use other liquids as this may damage the machine or create hazardous conditions.
- Do not ingest the snow fluid or foam. Keep out of reach of children and pets.
- Ensure adequate ventilation when operating the machine to prevent overheating.
- Do not block the ventilation slots on the machine.
- Avoid direct contact with the output nozzle during operation.
- Position the machine on a stable, level surface or securely mount it to prevent tipping.
- Disconnect power before performing any maintenance or refilling the fluid tank.
3. Konfigurazioa
- Desegin: Carefully remove the snow machine and all accessories from the packaging.
- Kokalekua: Place the machine on a stable, flat surface or use the integrated handle for hanging. Ensure the output nozzle is directed away from people and sensitive equipment.
- Bete fluido-depositua: Open the fluid tank cap and carefully pour VEVOR snow fluid into the tank. The machine is designed for a 1L tank capacity. Ensure the hose is properly submerged in the fluid.
- Konektatu energia: Plug the power cord into a standard AC 110V-120V, 60Hz grounded outlet.
Figure 3: Step-by-step guide for initial setup of the snow machine.
4. Funtzionamendu-argibideak
- Piztu: Flip the main power switch on the rear of the machine to the 'ON' position. The machine does not require preheating.
- Adjust Snow Output: Use the rear-mount control switch to adjust the snow volume and flake size. Turn the knob to increase or decrease the output.
- Haririk gabeko urrutiko kontrola: Use the included wireless remote to operate the machine from up to 32.8 ft away. The remote allows you to turn the snow output on/off and adjust settings.
- DMX Control (if applicable): For advanced stage setups, the machine can be integrated with a DMX512 system for synchronized control with music and lighting. Refer to your DMX controller's manual for specific programming instructions.
Figure 4: Adjustable output and remote control features.
5. irudia: Adibamples of how the snow machine can be used for different events.
5. Mantentzea
- Garbiketa: After each use, especially if storing for an extended period, run the machine with distilled water to flush out any remaining snow fluid from the pump and nozzle.
- Fluid Storage: Store unused snow fluid in a cool, dry place, away from direct sunlight. Ensure the cap is tightly sealed.
- Kanpoko garbiketa: Garbitu makinaren kanpoaldea oihal leun eta lehor batekin. Ez erabili garbitzaile edo disolbatzaile urratzailerik.
- Ikuskapena: Regularly inspect the power cord, fluid hose, and connections for any signs of wear or damage.
Figure 6: The machine's robust construction ensures longevity and ease of maintenance.
6. Arazoak
- Potentziarik gabe: Check the power cord connection and ensure the outlet is functional. Verify the main power switch is in the 'ON' position.
- Elur irteerarik ez: Ensure the fluid tank contains sufficient snow fluid and the hose is correctly inserted. Check if the output adjustment knob is set above minimum.
- Weak Snow Output: Verify the fluid level and ensure the nozzle is clear of any obstructions. Adjust the output knob to a higher setting.
- Urrunekoa ez dabil: Check the battery in the wireless remote. Ensure there are no obstructions between the remote and the machine's receiver.
7. Zehaztapenak
| Ezaugarri | Zehaztapena |
|---|---|
| Elementuaren eredu-zenbakia | Máquina de nieve, 800 W |
| Potentzia nominala | 800W (nominal) |
| Sarrera boltage | AC 110V-120V, 60Hz |
| Spray Distantzia | 11.48 oin / 3.5 m |
| Estaldura Eremua | 10 m² |
| Pisu garbia | 6.11 lb / 2.77 kg |
| Produktuaren neurriak | 11.02 x 7.87 x 9.84 hazbeteko / 280 x 200 x 250 mm |
| Material nagusiak | Cold-rolled Steel (SPCC) + Plastic (PP) |
| Urruneko Kontrola | Included (with 12V23A Alkaline Battery) |
| Fluido deposituaren edukiera | Not Applicable (uses external 1L tank) |
7. irudia: Produktuaren neurriak eta barneko osagarriak.
8. Bermea eta Laguntza
VEVOR is committed to providing quality products and customer satisfaction. For technical support or warranty inquiries, please visit the VEVOR Support Center at www.vevor.com/support.
VEVOR offers a complete product range and aims to deliver pro-level performance through practical tech innovation. For more information about VEVOR products and services, please refer to the official VEVOR webgunea.
