VCELINK RJ45 1-Port Surface Mount Box Instruction Manual

1. Produktua amaitu daview

The VCELINK RJ45 1-Port Surface Mount Box provides a flexible solution for installing network cables in various locations such as walls, desktops, or office furniture. This box is designed to house a single RJ45 keystone jack, offering a clean and dustproof network connection point. It is compatible with UTP 90/180 degree RJ45 keystone jacks and supports CAT6, CAT5E, and CAT5 network cables.

2. Zer dago barne

Pakete bakoitzak osagai hauek ditu:

5 x 1-Port Surface Mount Boxes
10 x Muntatzeko torlojuak
10 x Kable loturak
5 x Alde Bikoitzeko Zinta Itsasgarri

Contents of the VCELINK RJ45 1-Port Surface Mount Box package, showing five boxes, mounting screws, double-sided tape, and cable ties.

Image: Package contents including surface mount boxes, screws, tape, and cable ties.

Note: Keystone jacks are not included and must be purchased separately.

3. Zehaztapenak

Marka	VCELINK
Modelo zenbakia	A166-1A-5P-CA
Konektore mota	RJ45
Cable Type Compatibility	Ethernet (Cat6, Cat5e, Cat5)
Gailu bateragarriak	Keystone Jack
Maximum Cable Outer Diameter	6.2 mm (0.24 hazbete)
Materiala	Akrilonitrilo Butadieno Estirenoa (ABS)
Kolorea	Zuria
Produktuaren neurriak	2.21 x 1.81 x 1.07 hazbete
Unitate kopurua	5 paketea

Diagram showing the dimensions of the VCELINK RJ45 1-Port Surface Mount Box: 56.2mm/2.21in length, 46mm/1.81in width, and 27.3mm/1.07in height.

Irudia: Produktuaren neurriak.

Close-up image of the surface mount box with a flame effect, highlighting its construction from high impact and flame retardant ABS plastic.

Image: Construction material (ABS plastic).

4. Instalazio gida

This section provides step-by-step instructions for installing the VCELINK RJ45 1-Port Surface Mount Box. You can choose between screw mounting or using double-sided adhesive tape.

4.1 Bideo-tutoriala

Video: How to install the RJ45 keystone jack into the surface mount box.

4.2 Step-by-Step Instructions

Kutxa prestatu: Gently pry up the cap of the surface mount box using a flat-head screwdriver or similar tool to access the interior.
Insert Keystone Jack: Ensure the keystone jack is oriented correctly (usually with the 'UP' arrow or label facing upwards). Insert the keystone jack into the opening in the base of the surface mount box until it clicks securely into place. The keystone jack should be held firmly.

An RJ45 keystone jack being inserted into the base of the surface mount box, with an arrow indicating the 'UP' direction.

Image: Inserting the keystone jack into the box base.

Kablearen ibilbidea: If your network cable has a larger diameter, you may need to remove the pre-scored section at the rear of the box to accommodate it. The maximum cable outside diameter supported is 6.2 mm.

Diagram showing the rear of the surface mount box with a section marked for removal to accommodate cables up to 6.2mm in diameter.

Image: Removing the cable exit section for thicker cables.

Secure the Cable (Optional): Use the provided cable tie to secure the network cable to the internal cable management post within the box. This helps prevent strain on the keystone jack connection.
Mount the Box (Screws): Position the box on your desired surface. Use the two provided mounting screws to securely fasten the box to the wall or surface.
Mount the Box (Adhesive Tape): Alternatively, peel the backing from the double-sided adhesive tape and apply it to the back of the surface mount box. Press the box firmly onto a clean, dry, and smooth surface for secure adhesion.
Itxi txanoa: Once the keystone jack is installed and the box is mounted, carefully align and snap the top cap back onto the base until it is fully closed.

5. Funtzionamendu-argibideak

After successful installation, the VCELINK RJ45 1-Port Surface Mount Box functions as a standard network port.

Gailu bat konektatzea: Simply plug a standard RJ45 Ethernet cable from your network device (e.g., computer, printer, gaming console) into the keystone jack on the surface mount box.
Gailu bat deskonektatzea: To disconnect, press the release tab on the RJ45 connector and gently pull the cable out of the keystone jack.

Three images showing the VCELINK RJ45 surface mount box in use: one on a desk connected to a laptop, another on a wall with multiple cables, and a third on a floor near a plant, demonstrating various installation scenarios.

Irudia: Adibamples of the surface mount box in various installations.

6. Mantentzea

The VCELINK RJ45 1-Port Surface Mount Box requires minimal maintenance.

Garbiketa: Use a soft, dry cloth to wipe the exterior of the box. Avoid abrasive cleaners or solvents.
Ikuskapena: Periodically check the box and cable connections for any signs of damage or loose fittings.
Keystone Replacement: The design allows for easy replacement of the keystone jack if needed. To replace, gently pry open the cap, then carefully push the keystone jack out from the front using a small tool. Insert a new keystone jack and reassemble.

An image illustrating the reusability of the keystone jack, showing a keystone being removed from the surface mount box for replacement or upgrade.

Image: Keystone jack can be easily replaced.

7. Arazoak

Keystone Jack Does Not Fit: Ensure you are using a standard UTP 90/180 degree RJ45 keystone jack. Some overly long female-to-female couplers may not fit.
Cable Does Not Fit Through Opening: The maximum supported cable outer diameter is 6.2 mm. If your cable is thicker, ensure the removable section at the rear of the box has been detached.
Box Not Sticking with Tape: Ensure the mounting surface is clean, dry, and smooth. For rough or uneven surfaces, screw mounting is recommended.
Konexio soltea: Verify that the keystone jack is fully snapped into the box and that the Ethernet cable is securely plugged into the keystone jack.

8. Bermea eta Laguntza

VCELINK products are designed for reliability and performance. For specific warranty details and technical support, please refer to the official VCELINK website or contact customer service directly. Contact information is typically available on the product packaging or the manufacturer's webgunea.

VCELINK offers 24/7 friendly customer service to assist with any product-related inquiries or issues.

	VCELINK GJ671BL RJ45 Krimpatzeko Tresnaren Erabilera Gida VCELINK GJ671BL krismatzeko tresna erabiltzeko urratsez urratseko argibideak sareko kableetarako RJ45 konektoreak muntatzeko, CAT5 eta CAT7 barne.
	VCELINK 2026 Brand Product Brochure - Networking Accessories & Tools Explore the comprehensive VCELINK 2026 Brand Product Brochure featuring a wide range of high-quality networking accessories, tools, and audio-visual solutions. Discover RJ45 connectors, crimpers, testers, cable management, wall plates, and more for professional and home use.
	VCELINK 2025 Markaren Produktuen Liburuxka: Sareko Tresnak eta Osagarriak Arakatu VCELINK 2025 Markaren Produktuen Liburuxka osoa, profesionalentzat eta brikolaje zaleentzat diseinatutako sareko tresna, konektore, kable, hormako plaka eta audio/bideo osagarri ugari dituena. Ezagutu konexio fidagarri eta instalazio eraginkorretarako irtenbideak.
	VCELINK 2025 Markaren Produktuen Liburuxka Arakatu VCELINK 2025 Markaren Produktuen Liburuxka, sareko osagarrien, eskuzko erreminten eta markako zerbitzuen gama zabala duena. Ezagutu profesionalentzat zein brikolaje zaleentzat diseinatutako kalitate handiko produktuak, berrikuntzan eta bezeroen gogobetetasunean arreta jarriz.
	Tektronix CA-70x SMU kable-multzo modularrak: argibideak eta zehaztapenak Tektronix CA-70x SMU kable-multzo modularretarako argibide eta zehaztapen zehatzak, modeloaren informazioa, pin-out-ak, ezaugarriak eta MP5000 serieko zehaztasun-mahai nagusi modularrekin erabiltzeko funtsezko segurtasun-neurriak barne.

VCELINK A166-1A-5P-CA