LILYGO T-Deck Pro SX1262 LoRa Development Board User Manual

1. Sarrera

The LILYGO T-Deck Pro is a versatile development board designed for wireless communication and various IoT applications. It integrates an SX1262 LoRa module for long-range communication, GPS for positioning, and a 3.1-inch ultra-wide viewing low-power E-Paper display. This manual provides essential information for setting up, operating, and maintaining your T-Deck Pro device.

LILYGO T-Deck Pro front view with E-Paper display showing icons for LoRa, Setting, GPS, WiFi, Test, Battery, Input, A7682, and Shutdown. — 1. irudia: Aurrealdea view of the LILYGO T-Deck Pro, showcasing its E-Paper display and QWERTY keyboard.

2. Ezaugarri nagusiak

Bertsioa: This specific model features the PCM5102A audio module.
Antena: Equipped with a built-in antenna for convenient use.
Firmware Support: Compatible with Meshtastic and LILYGO firmware, offering flexibility for various projects.
Pantaila: 3.1-inch Ultra Wide Viewing Low Power E-Paper display for clear information at a glance.
Konektibitatea: Features SX1262 LoRa for 915Mhz long-range wireless communication, GPS for location services, and USB for data transfer and power.

Comparison table of LILYGO T-Deck Pro versions, highlighting PCM5102A features. — Figure 2: Comparison of LILYGO T-Deck Pro versions, detailing features of the PCM5102A model.

3. Zehaztapenak

Ezaugarri	Xehetasuna
RAM	LPDDR
Prozesadorearen marka	BESOA
Prozesadore kopurua	1
Sistema eragilea	Meshtastic, LILYGO
Konektibitate Teknologia	LoRa 915Mhz, GPS, USB

LILYGO T-Deck Pro with dimensions: Length 120mm, Width 66mm, Height 13.5mm. — Figure 3: Device dimensions for the LILYGO T-Deck Pro.

Technical diagram showing MCU, Wireless Connectivity, Development, Flash, Onboard functions, E-Paper details, SX1262 LoRa Transceiver, and Board Functionality. — Figure 4: Detailed technical specifications and board functions.

Pinout diagram for LILYGO T-Deck Pro (4G / I2S) versions, showing connections for E-Paper, Touch, Vibration Motor, LoRa, SD Card, Gyroscope, Microphone, GPS, and Keyboard. — Figure 5: Pinout map for LILYGO T-Deck Pro (PCM5102A version).

4. Konfigurazioa

Before operating your LILYGO T-Deck Pro, ensure proper setup and firmware installation.

4.1 Gainetik fisikokiview

Itzuli view of the LILYGO T-Deck Pro, showing the internal components through a transparent casing. — 6. irudia: Atzealdea view of the LILYGO T-Deck Pro.

Aldea view of the LILYGO T-Deck Pro, highlighting the USB-C port, SIM card slot, and TF card slot. — 7. irudia: Aldea view showing USB-C, SIM Card, and TF Card slots.

4.2 Firmware Installation (Meshtastic Example)

The LILYGO T-Deck Pro supports Meshtastic firmware for off-grid communication. Follow these steps to install or update the firmware:

Visit the official Meshtastic webgunea (meshtastic.org) and navigate to the 'Downloads' section.
Download the appropriate device firmware for your T-Deck Pro model.
Deskonprimitu deskargatutako firmwarea file.
Connect your T-Deck Pro to your computer using a USB-A to USB-C cable.
The device should appear as a removable disk (e.g., TECHBOOT).
Kopiatu firmwarea file (e.g., `firmware-t-echo-xxxx.uf2`) into the device's disk. The device will refresh after the copy is complete.
Install the Meshtastic App on your phone (available for Android and iOS).
Open the Meshtastic app, switch to the connection interface, and search for your updated device.
Connect to your device and configure the frequency band and user name.

Video 1: Demonstrates how to install Meshtastic firmware on a LILYGO T-Echo device, which uses a similar process to the T-Deck Pro. This includes downloading firmware, connecting the device, copying the firmware file, and connecting via the Meshtastic mobile app.

Video 2: Shows the installation process for an ESP32 LoRa V3 N32 Set, providing visual guidance for connecting components and initial setup steps.

5. Gailuaren funtzionamendua

Once your LILYGO T-Deck Pro is set up with Meshtastic firmware, you can begin using its communication features.

5.1 Mezuak bidaltzea

Use the integrated QWERTY keyboard to type messages. Messages are sent over the LoRa mesh network. The E-Paper display will show sent and received messages.

Video 3: Provides an overview of the LILYGO T-Deck Pro, demonstrating its physical features and basic interaction with the E-Paper display and keyboard.

Video 4: Demonstrates the LILYGO T-LoRa Pager, showcasing its compact design and message sending capabilities over LoRa.

5.2 LoRa Technology Demonstration

The T-Deck Pro utilizes LoRa technology for robust, long-range communication, ideal for areas without traditional cellular service. The device can send and receive messages, and with appropriate firmware, can display GPS data and maps.

Video 5: A detailed DIY project using ESP32 LoRa V3 N32 Set for door monitoring, illustrating the practical applications of LoRa communication.

6. Mantentzea

Mantendu gailua lehor eta muturreko tenperaturetatik urrun.
Clean the E-Paper display gently with a soft, dry cloth.
Ensure the battery is charged regularly to maintain optimal performance.

7. Arazoak

Gailua ez da pizten: Check battery charge and USB connection.
Komunikazio arazoak: Verify firmware installation, antenna connection, and ensure both devices are on the same frequency band.
Pantaila ez dabil: Try restarting the device. If the issue persists, consult the LILYGO Wiki.
Firmware update failure: Ensure correct firmware file is used and follow the installation steps precisely.

8. Laguntza eta Baliabideak

For further assistance, technical documentation, or community support, please refer to the following resources:

GitHub Repository: github.com/Xinyuan-LilyGO/T-Deck-Pro
LILYGO Wiki: wiki.lilygo.cc/
Produktuen zerbitzua: If you have any questions or suggestions about the product, please feel free to contact us. We will answer your question as soon as possible.

	LILYGO T-Deck ESP32-S3 Erabiltzailearen Gida Arduino Garapenerako LILYGO T-Deck garapen-plakaren erabiltzaile-gida osoa, Arduino IDEaren konfigurazioa, ESP32-S3 konfigurazioa, Wi-Fi eta LoRa funtzionaltasuna eta IoT aplikazioetarako SSC komandoen erreferentzia zehaztuz.
	LILYGO T-Echo Erabiltzailearen Gida: Arduinoarekin konfigurazioa eta garapena LILYGO T-Echo garapen-plakaren erabiltzaile-gida osoa, konfigurazioa, Arduino IDE integrazioa eta IoT aplikazioen oinarrizko garapena zehaztuz. Hardwarea hartzen du barne.view, softwarearen instalazioa, konfigurazioa eta zirriborroen igoera.
	LILYGO T3-S3 Erabiltzailearen Gida LILYGO T3-S3 garapen-plakaren erabiltzailearen gida, Arduino IDEaren konfigurazioa, ESP32-S3 moduluaren probak eta Wi-Fi komandoen erreferentzia biltzen dituena.
	LILYGO T-BEAM-S3 Erabiltzailearen Gida: Konfigurazioa eta Garapena Erabiltzailearen gida honek LILYGO T-BEAM-S3 garapen-plaka konfiguratzeko argibide osoak eskaintzen ditu. Ikasi software-ingurunea Arduino IDE erabiliz nola konfiguratu, plaka nola konektatu eta bere Wi-Fi, BLE, GPS eta LoRa gaitasunak nola erabili IoT proiektuetarako.
	LILYGO Mini E-Paper-S3 Erabiltzailearen Gida LILYGO Mini E-Paper-S3 garapen-plakaren erabiltzaile-gida osoa. Konfigurazioa, Arduino IDE integrazioa, firmwarearen garapena eta IoT aplikazioetarako Wi-Fi komandoen erreferentzia biltzen ditu.
	LILYGO T-Display-S3 Pro ESP32-S3 Development Board User Guide Comprehensive user guide for the LILYGO T-Display-S3 Pro ESP32-S3 development board. Covers setup of the Arduino IDE, software installation, configuration, connecting the board, and a reference for common Wi-Fi SSC commands.

LILYGO PCM5102A Meshtastic Firmware