VEVOR Rotary Laser Level Kit Instruction Manual (Model LRE203)

1. Sarrera

Thank you for choosing the VEVOR Rotary Laser Level Kit, Model LRE203. This comprehensive kit is designed to provide accurate and efficient leveling and alignment for a wide range of construction and home improvement projects. Please read this manual thoroughly before operating the device to ensure safe and correct usage.

Ezaugarri nagusiak:

• 360-Degree Rotating Scan: Self-leveling rotary laser level for efficient site-wide leveling and alignment. Features ±5° self-leveling with manual mode. Variable speeds (0/60/120/300/600 rpm) and scan angles (0°, 10°, 45°, 90°, 180°) cover every task.
• 984 ft Working Distance: The laser level reaches up to 984 ft with the receiver, ideal for large remodels and small jobsites. Includes receiver, grade rod, tripod, and laser glasses to enhance visibility in bright conditions.
• Potentzia kargagarria: Driven by four 1.2V NiMH cells, the rotary laser runs 8–12 hours per charge (charger included), keeping you productive without frequent battery swaps.
• IP54 Durability: Rugged, impact-resistant housing seals out water and dirt for long-term reliability. The rotary laser level kit comes with a tough hard case for organized transport.
• Erabilera erraza: Intuitive interface plus remote control (up to 65 ft) for quick setup. 5/8 inch mounting thread fits most tripods and accessories used with rotary lasers.

2. Paketearen edukia

Verify that all items listed below are included in your VEVOR Rotary Laser Level Kit:

• 1 x Rotary Laser Level
• 1 x Laser Receiver
• 1 x Urruneko kontrola
• 1 x Tripode arina
• 1 x Scale (Grade Rod)
• 1 x Laser Reflector
• 1 x Laser Glasses
• 1 x Adapter (US Standard)
• 1 x Plastic Toolbox
• 1 x Erabiltzailearen eskuliburua

3. Zehaztapenak

4. Segurtasun informazioa

This device emits a Class II laser. Always follow these safety precautions:

• Ez begiratu zuzenean laser izpiari.
• Saihestu begiak laser izpiaren eragin zuzena.
• Ez zuzendu laser izpia pertsonei edo animaliei.
• Use laser safety glasses when operating the device, especially in bright conditions.
• Mantendu gailua haurren eskura.
• Do not attempt to modify or disassemble the laser level.

5. Konfigurazioa

5.1 Bateriaren instalazioa

The rotary laser level is powered by four 1.2V NiMH rechargeable batteries. Ensure the batteries are fully charged before first use. Insert the batteries into the designated compartment, observing correct polarity.

5.2 Mounting the Laser Level

The VEVOR Rotary Laser Level can be mounted on the included lightweight tripod or other compatible accessories using its 5/8 inch mounting thread.

1. Extend the legs of the tripod to a stable position on a flat surface.
2. Securely attach the rotary laser level to the tripod's mounting screw.
3. Ensure the tripod is stable and the laser level is positioned at the desired height.

6. Funtzionamendu-argibideak

6.1 Piztea eta auto-mailakatzea

1. Place the laser level on a stable surface or tripod.
2. Sakatu pizteko botoia gailua pizteko.
3. The device will automatically self-level within ±5°. If the tilt angle exceeds 5°, an alarm will sound, indicating the device is outside its self-leveling range. Adjust the device's position until the alarm stops and the laser stabilizes.

6.2 Funtzionamendu moduak

The rotary laser level offers various modes for different applications:

• Errotazio-abiaduraren doikuntza: Cycle through variable speeds (0/60/120/300/600 rpm) to suit your visibility and application needs. Higher speeds provide a more continuous line, while lower speeds offer better visibility for individual points.
• Scan Angle Adjustment: Select from various scan angles (0°, 10°, 45°, 90°, 180°) to create a visible laser line in a specific area, reducing interference.
• Eskuzko modua: For applications requiring sloped lines, activate manual mode. This disables the self-leveling function, allowing you to tilt the device to any desired angle.

6.3 Urruneko agintea erabiltzea

The included remote control allows for convenient operation of the laser level from up to 65 ft away. Use it to adjust rotation speed, scan angle, and switch between auto/manual modes without touching the device, preventing accidental movement.

6.4 Using the Laser Receiver and Grade Rod

For outdoor use or in very bright conditions, the laser receiver extends the working range up to 984 ft. The grade rod provides a stable platform for the receiver to accurately measure and transfer heights.

1. Attach the laser receiver to the grade rod using its clamp.
2. Turn on the laser receiver.
3. Move the grade rod with the receiver until the receiver indicates it has detected the laser beam (usually with an audible tone and/or visual indicator).
4. Adjust the receiver's position on the grade rod until the center mark aligns with the laser beam.
5. Read the measurement from the grade rod to determine the precise height.

7. Mantentzea

7.1 Garbiketa eta biltegiratzea

• Aldian-aldian garbitu gailua leun batekin, damp oihal. Ez erabili produktu kimiko gogorrak edo garbitzaile urratzaileak.
• Keep the laser emission window clean to ensure optimal performance.
• Store the device in its plastic toolbox in a dry, cool place when not in use.

7.2 Bateria zaintzea

• Recharge the NiMH batteries using the provided adapter. A full charge provides 8-12 hours of operation.
• Do not overcharge or completely discharge the batteries.
• Kendu bateriak gailua denbora luzez erabiliko ez bada.

8. Arazoak

9. Bermea eta Laguntza

VEVOR products are designed for durability and performance. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official VEVOR webgunea. Gorde erosketa-agiria erosketaren frogagiri gisa.