Sarrera
This manual provides essential instructions for the safe and effective operation of your HAKINAKU HD05 Plug-in Natural Gas Detector. This device is designed to detect various combustible gases, including natural gas, propane, methane, LPG, and LNG, providing real-time monitoring of gas concentration, temperature, and humidity.
Segurtasun informazio garrantzitsua
- Irakurri arretaz argibide guztiak instalatu eta erabili aurretik.
- Gailu hau barrualdean erabiltzeko bakarrik dago pentsatuta.
- Do not paint over the detector. Paint can clog the sensor openings and prevent the unit from functioning properly.
- Do not block the ventilation openings on the device.
- Regularly test the detector as per the instructions to ensure proper operation.
- This device detects combustible gases. It is not a carbon monoxide (CO) detector. Ensure you have separate CO detectors if needed.
- In case of an alarm, follow emergency procedures immediately.
Produktua amaituview
The HAKINAKU HD05 features a compact design with a clear display and intuitive controls.
Irudia: Aurrealdea eta atzealdea view of the HAKINAKU HD05 Plug-in Natural Gas Detector, showing the display, control buttons, and the plug mechanism.
Ezaugarri nagusiak:
- Real-time monitoring of combustible gas concentration.
- High-precision sensors.
- High-definition color screen display (2.1 inches).
- Audible and visual alarm.
- Fault self-check function.
- Plug-and-play design.
- Built-in 1000 mAh backup battery for power outages.
Irudia: Lehertua view of the HAKINAKU HD05 gas detector highlighting its internal high-precision sensors.
Bistaratzeko adierazleak:
Image: Close-up of the HAKINAKU HD05 display showing various icons and their meanings, including gas status, temperature, and humidity.
- GAS Icon: Indicates gas detection status.
- Alarm Bell Icon: Flashes during an alarm.
- Bateria ikonoa: Shows battery charge level.
- Hizlariaren ikonoa: Indicates sound status.
- Eguzkiaren ikonoa: Indicates screen brightness setting.
- Tenperatura bistaratzea: Shows current ambient temperature (e.g., 68°F).
- Hezetasuna bistaratzea: Shows current ambient humidity (e.g., 60%).
Botoiak:
- H botoia: Mute alarm / Function button.
- O botoia: Self-test / OK button.
- D botoia: Screen dimmer / Down button.
Konfigurazioa
Despaketatzea:
Carefully remove the gas detector and its accessories from the packaging. Verify that all components are present: Gas detector x1, Manual.
Lekua:
Choose a suitable location for the detector. Combustible gases like natural gas (methane) are lighter than air and rise, while LPG (propane, butane) is heavier than air and sinks.
- For Natural Gas (Methane): Install the detector 12 inches (30 cm) below the ceiling and 60 inches (150 cm) away from the gas source.
- For LPG (Propane, Butane): Install the detector 12 inches (30 cm) above the floor and 60 inches (150 cm) away from the gas source.
- Avoid placing near ventilation fans, doors, windows, or areas with high humidity or extreme temperatures.
Potentzia-konexioa:
The HAKINAKU HD05 is a plug-in device.
- Plug the detector directly into a standard 110V to 240V AC outlet.
- The device will automatically power on and begin its self-check process.
- The built-in 1000 mAh lithium-ion backup battery will charge automatically when plugged in.
Image: The HAKINAKU HD05 gas detector plugged into a standard wall outlet, demonstrating its compact design.
Funtzionamendu-argibideak
Initial Self-Check:
Upon plugging in, the detector will perform a self-check. The screen will cycle through various indicators. Once complete, it will display "GAS" with a green icon, indicating normal operation.
Funtzionamendu normala:
In normal operation, the screen displays "GAS" with a green icon, current temperature, and humidity.
Alarmaren adierazpenak:
The detector provides both audible and visual alarms based on gas concentration levels:
- No Combustible Gas: Green icon, no alarm sound.
- Low Concentrations: Yellow icon blinks, alarm sounds once every 2 minutes.
- Medium Concentrations: Orange icon blinks, alarm sounds once every 2 minutes.
- High Concentrations: Red icon blinks, alarm sounds continuously.
Image: The HAKINAKU HD05 gas detector displaying an alarm state with gas bubbles indicating detection, and an orange screen.
What to do during an alarm:
- Do not operate electrical switches or phones.
- Immediately open all windows and doors to ventilate the area.
- Turn off the gas supply at the main valve if safe to do so.
- Evacuate all occupants from the building.
- Call the gas company or emergency services from a safe location outside the building.
- Do not re-enter the building until it has been declared safe by professionals.
Autotest funtzioa:
To manually test the detector, short press the 'O' (OK/Select) button. The device will perform a self-test, activating the alarm sound and visual indicators briefly.
Image: A hand pressing the 'O' button on the HAKINAKU HD05 detector to initiate a self-test, showing the screen indicating a test in progress.
Mutu funtzioa:
In case of an alarm, you can temporarily mute the audible alarm by pressing the 'H' button. The visual alarm will continue to indicate the gas presence.
Pantailaren distira doitzea:
Press the 'D' button to adjust the screen brightness.
Mantentzea
Garbiketa:
Clean the detector regularly to prevent dust accumulation.
- Erabili biguna, damp kanpoaldea garbitzeko zapia.
- Ez erabili produktu kimiko gogorrik, urratzailerik edo disolbatzailerik.
- Ensure no liquids enter the device openings.
Bateria zaintzea:
The built-in lithium-ion battery provides backup power during outages.
- The battery charges automatically when the device is plugged into an AC outlet.
- A fully charged battery provides approximately 12-15 hours of emergency operation.
- The battery is designed for a long lifespan (7 years) and is not user-replaceable.
Ohiko probak:
It is recommended to test the detector weekly by pressing the self-test button.
Arazoak konpontzea
Ez dago pizterik/Pantaila itzalita:
- Ensure the detector is securely plugged into a working AC outlet.
- Egiaztatu entxufea funtzionatzen duen beste gailu bat konektatuz.
- If the device is running on battery backup, ensure the battery is charged.
Alarma faltsuak:
- Verify there are no actual gas leaks.
- Check for sources of other combustible vapors (e.g., aerosols, cleaning products, alcohol) near the detector.
- Ensure proper placement away from strong air currents or high humidity.
Alarm Sounds Continuously (Red Icon):
- This indicates a high concentration of combustible gas. Follow emergency procedures immediately.
Yellow/Orange Icon Blinking, Alarm Sounds Intermittently:
- This indicates low to medium gas concentrations. Investigate potential minor leaks or sources of gas.
Red Light (Alarm) or Sensor Malfunction:
If the red light indicates a sensor malfunction or persistent error, contact customer support.
Zehaztapenak
| Ezaugarri | Xehetasuna |
|---|---|
| Modelo zenbakia | HD05 |
| Energia iturria | AC 110V-240V |
| Backup Bateria | 1000 mAh Lithium Ion (12-15h emergency life) |
| Detektatutako gasak | Natural Gas (Methane), Propane, Butane, LPG, LNG, Coal Gas, Gasoline, Hexane, Benzene, Ethylene Oxide, Acetylene |
| Alarmaren bolumena | 85 dB |
| Bistaratzea | 2.1'' HD Color Screen |
| Neurriak | 2.04 x 1.3 x 3.34 hazbete |
| Elementuaren pisua | 3.52 ontza |
| Erabilera | Barruan |
| Dakarten osagaiak | Gas detector x1, Manual |
Bermea eta Laguntza
HAKINAKU offers a 5-year free exchange warranty for any quality issues.
For technical support, troubleshooting assistance, or warranty claims, please contact HAKINAKU customer service through your purchase platform or refer to the contact information provided with your product packaging.
Baliabide osagarriak
For more information about gas safety, please consult local authorities or gas utility providers.
