Eskuliburuak+

ELEGOO Mini Heater and Stainless Steel Funnel Kit

ELEGOO Mini Heater and Stainless Steel Funnel Kit User Manual

For Resin 3D Printers

1. Produktua amaitu daview

This manual provides instructions for the ELEGOO Mini Heater for Resin 3D Printers and the ELEGOO 3D Stainless Steel Funnel with Filter and Brush. These tools are designed to enhance your resin 3D printing experience by optimizing resin temperature and ensuring clean resin handling.

ELEGOO Mini Heater and two air filters, alongside a stainless steel funnel, filter, brush, and gloves.

Image: The ELEGOO Mini Heater, two replacement air filters, a stainless steel funnel, a mesh filter, a cleaning brush, and a pair of gloves.

2. Segurtasun informazioa

  • Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling resin.
  • Ensure proper ventilation when operating the 3D printer and heater.
  • Keep the Mini Heater away from water or other liquids.
  • Do not attempt to disassemble or modify the Mini Heater or Funnel.
  • Mantendu haurren eta maskoten eskura.

3. Konfiguratzeko argibideak

3.1 ELEGOO Mini Heater Installation

  1. Prepare the Printer Casing: Identify a suitable flat surface inside your resin 3D printer's casing for mounting the heater.
  2. Secure Adapter to Printer Casing: Use the provided screws (labeled 1 and 2 in the diagram) to secure the mounting adapter plate to the inside wall of your 3D printer's casing. Ensure it is firmly attached.
  3. Secure Adapter to Heater: Attach the other part of the mounting adapter to the back of the Mini Heater using the designated screws (labeled 3 and 4 in the diagram).
  4. Berogailua muntatu: Slide the Mini Heater, with its attached adapter, onto the adapter secured to the printer casing. Ensure it clicks into place securely.
  5. Konektatu energia: Plug the power cable into the DC socket (labeled 2 in the diagram) on the heater. Connect the other end to a power source.
  6. Piztu: Flip the power switch (labeled 1 in the diagram) to turn on the heater.
Diagram showing two steps for installing the ELEGOO Mini Heater inside a 3D printer's red cover. Step 1 shows securing an adapter to the printer casing and to the heater. Step 2 shows the heater mounted and pointing out the power switch and DC socket.

Image: Step-by-step installation guide for the Mini Heater, detailing how to secure the adapter and connect power.

3.2 ELEGOO Stainless Steel Funnel Preparation

The stainless steel funnel is ready for use out of the box. Ensure the mesh filter is clean before first use. The included brush can be used for cleaning.

ELEGOO Stainless Steel Funnel with a fine mesh filter, a cleaning brush, and two pairs of disposable gloves.

Image: Components of the ELEGOO Stainless Steel Funnel kit, including the funnel, filter, brush, and gloves.

4. Funtzionamendu-argibideak

4.1 Using the ELEGOO Mini Heater

The Mini Heater is designed to maintain optimal resin temperature for consistent 3D printing results. It features smart temperature control and an air filtration system.

  • Tenperatura-kontrol adimenduna: The heater automatically activates when the internal temperature drops below 25°C and stops heating when it reaches or exceeds 25°C. This ensures the resin maintains optimal fluidity, reducing issues like warping and cracking during printing.
  • Berokuntza azkarra eta uniformea: Equipped with a PTC heating block and a 10000R/MIN high-speed fan, the heater quickly and uniformly raises the temperature inside the printer chamber to 25°C.
  • Airearen iragazketa: The self-contained air filtration module helps to reduce resin odors and airborne particles, contributing to a fresher printing environment.
Diagram illustrating the smart temperature control of the ELEGOO Mini Heater. It shows automatic heating below 25°C and stopping heating at or above 25°C, with a graph showing temperature stabilization.

Image: Illustration of the Mini Heater's smart temperature control, showing automatic heating below 25°C and stopping at or above 25°C.

Images demonstrating the benefits of maintaining resin fluidity: smooth resin pouring, a 3D print without warping, and a 3D print without cracking.

Irudia: Visual examples of how proper resin temperature, facilitated by the heater, helps maintain resin fluidity and prevents common printing issues like warping and cracking.

4.2 Using the ELEGOO Stainless Steel Funnel

The stainless steel funnel is essential for safely and cleanly filtering unused resin back into its bottle after printing, or for transferring resin between containers.

  1. Jantzi eskularruak: Always wear the provided gloves or other suitable protective gloves when handling resin.
  2. Leku-iragazkia: Insert the fine mesh filter into the funnel.
  3. Position Funnel: Place the funnel securely into the opening of the resin bottle or container you wish to pour into.
  4. Pour Resin: Carefully pour the resin through the filter and funnel. The filter will catch any cured resin bits or debris, ensuring clean resin for future prints.
  5. Garbiketa: After use, clean the funnel and filter immediately with isopropyl alcohol (IPA) or a suitable resin cleaner.

5. Mantentzea

5.1 ELEGOO Mini Heater Maintenance

  • Aire-iragazkia ordezkatzea: The Mini Heater includes a self-contained air filtration module. Replace the air filter periodically (e.g., every 1-3 months depending on usage) to maintain optimal air purification performance. Two replacement filters are included.
  • Garbiketa: Gently wipe the exterior of the heater with a dry or slightly damp oihal. Ez erabili produktu kimiko gogorrik eta ez murgildu unitatea uretan.
ELEGOO Mini Heater with a close-up of its digital display showing '23.5' and a diagram illustrating the internal air filtration layers.

Image: The Mini Heater displaying its temperature, with an inset showing the multi-layer air filtration system.

5.2 ELEGOO Stainless Steel Funnel Maintenance

  • Garbiketa: After each use, clean the funnel and mesh filter thoroughly with isopropyl alcohol (IPA) or a resin cleaner. Ensure all resin residue is removed to prevent clogging and cross-contamination.
  • Eskuila garbitzea: Use IPA to clean the included brush after cleaning the funnel and filter.
  • Biltegiratzea: Store the clean and dry funnel and filter in a safe place to prevent damage or contamination.

6. Arazoak

6.1 Mini Heater Issues

  • Berogailua ez pizten: Check if the power cable is securely connected and the power switch is in the 'ON' position. Ensure the power outlet is functional.
  • Resin still too cold/printing issues: Verify the heater is correctly installed and operating. Ensure the ambient room temperature is not excessively low, which might challenge the heater's ability to maintain 25°C.
  • Ezohiko usainak: Check if the air filter needs replacement. Ensure the printer's ventilation system is adequate.

6.2 Funnel Issues

  • Slow resin filtration: The mesh filter may be partially clogged with cured resin or debris. Clean the filter thoroughly with IPA and the included brush.
  • Resin leaking: Ensure the funnel is properly seated in the resin bottle opening and that there are no cracks or damage to the funnel.

7. Zehaztapenak

7.1 ELEGOO Mini Heater

  • Tenperatura kontrola: Smart automatic heating below 25°C, stops at or above 25°C.
  • Berogailua: PTC Heating Block.
  • Fan abiadura: 10000R/MIN High-Speed Fan.
  • Ezaugarriak: Air Filtration Module.
  • Bateragarritasuna: ELEGOO Saturn Series, Mars Series, Jupiter SE 3D Printers.

7.2 ELEGOO 3D Stainless Steel Funnel

  • Materiala: Altzairu herdoilgaitza.
  • Funnel Dimensions: Approximately 110mm (4.3in) top diameter, 100mm (3.9in) height.
  • Spout Diameter: Approximately 15.7mm (0.6in).
  • Iragazkien neurriak: Approximately 48mm (1.9in) diameter, 51mm (2in) height.
  • Eskuila neurriak: Approximately 95mm (3.7in) length, 51mm (2in) brush head length.
  • Osagarriak barne: Fine mesh filter, cleaning brush, disposable gloves.
Diagram showing the dimensions of the ELEGOO Stainless Steel Funnel, filter, and brush in millimeters and inches.

Image: Detailed dimensions for the stainless steel funnel, filter, and brush.

8. Bermea eta Laguntza

8.1 Bermearen informazioa

For detailed warranty information regarding your ELEGOO products, please refer to the official ELEGOO webwebgunean edo erosketarekin batera datorren berme-txartelean. Berme-baldintzek normalean fabrikazio-akatsak estaltzen dituzte erabilera-baldintza normaletan.

8.2 Bezeroarentzako laguntza

If you encounter any issues or have questions about your ELEGOO Mini Heater or Stainless Steel Funnel, please contact ELEGOO customer support through their official webgunea edo produktuaren ontzian emandako harremanetarako informazioa. Bisitatu ere egin dezakezu ELEGOO denda Amazonen produktuari buruzko informazio gehiago eta laguntza-baliabideak lortzeko.

Erlazionatutako dokumentuak - Mini Heater and Stainless Steel Funnel Kit

Aurreview ELEGOO Mars 4 Erretxinazko Inprimaketaren Ezarpenen Gida
ELEGOO Mars 4 3D inprimagailurako inprimatzeko ingurune-tenperatura eta erretxina-ezarpen optimoei buruzko gida osoa, hainbat erretxina mota barne hartzen dituena, besteak beste, estandarra, ABS itxurakoa, urarekin garbitu daitekeena, landare-oinarritutakoa, 8K, termokromikoa eta hortz-erretxinak.
Aurreview ELEGOO Saturn 4 Ultra 16K Erretxinazko 3D Inprimagailuaren Ezarpen Gida
ELEGOO Saturn 4 Ultra 16K 3D inprimagailuan erretxina desberdinetarako inprimatzeko ezarpenen gida osoa, emaitza optimoak lortzeko gomendatutako esposizio-denborak, geruzen altuerak eta beste parametro batzuk barne.
Aurreview ELEGOO Mars 4 Ultra 3D inprimagailuaren erretxina ezarpenen gida
ELEGOO Mars 4 Ultra 3D inprimagailurako erretxina-ezarpenen gida osoa, erretxina mota desberdinak eta haien inprimatze-parametro optimoak biltzen dituena.
Aurreview ELEGOO Saturn 4 Ultra 3D Printer Resin Settings Guide
A comprehensive guide to printing parameters for various resin types with the ELEGOO Saturn 4 Ultra 3D printer, including exposure times, layer height, and lifting speeds.
Aurreview ELEGOO Saturn 4 3D inprimagailuaren erretxina ezarpenen gida
ELEGOO Saturn 4 erretxina ezberdinetarako inprimatze-parametro optimoen gida osoa, besteak beste, estandarrak, ABS antzekoak, uretan garbitu daitezkeenak, landareetan oinarritutakoak eta hortz-erretxina espezializatuak eta 8K erretxinak. Beheko esposizioa, esposizio normala, geruzaren altuera, Z altxatze-distantzia eta -abiadura, eta Z atzeratze-abiadura bezalako ezarpenak biltzen ditu.
Aurreview ELEGOO Saturn 4 Ultra Resin Printing Parameters and Settings Guide
A comprehensive guide detailing optimal printing temperatures, resin types, exposure times, layer heights, and other critical settings for the ELEGOO Saturn 4 Ultra 3D printer. This document covers various resin formulations including Standard, ABS-Like, Water Washable, and specialized types.