INTEX 26769EH Prisma Marko Gardenaview Lur gaineko igerileku angeluzuzena

1. Produktua amaitu daview

This manual provides essential information for the safe assembly, operation, and maintenance of your Intex 26769EH Prism Frame Clearview Rectangular Above Ground Swimming Pool Set. Please read all instructions carefully before setup and retain this manual for future reference.

The Intex Prism Frame Clearview pool offers a unique swimming experience with its integrated vertical windows, allowing for underwater visibility. It features a robust frame structure and a durable liner designed for extended use.

Ezaugarri nagusiak:

• Garbiview Windows: Elegant vertical windows provide captivating underwater views.
• Eraikuntza iraunkorra: Features powder-coated metal frames and a 3-ply material liner for stability and strength.
• Muntaketa erraza: Designed for quick setup, ready for water in approximately 45 minutes after ground preparation.
• Puncture-Resistant Liner: Made with 3-Ply PVC material to resist wear and tear. A patch is included for minor repairs.
• Herdoilaren aurkako markoa: Composite T-Joints create a water-tight seal, preventing internal rust and ensuring long service life.
• Krystal Clear Filtration: Includes a 1500 GPH cartridge filter pump with HydroAeration Technology for improved circulation, filtration, and water clarity.

Image 1.1: The Intex Prism Frame Clearview Rectangular Pool set up in a backyard, showcasing its design and clear windows.

2. Segurtasun-argibide garrantzitsuak

Failure to follow these instructions can result in serious injury or death. Always ensure proper supervision and adherence to all safety guidelines.

• Helduen gainbegiratzea: Constant and competent adult supervision is required at all times. Never leave children unattended in or near the pool.
• Jauzi edo jauzirik ez egitea: This is an above-ground pool. Do not dive or jump into the pool, as this can lead to serious injury, paralysis, or death.
• Pool Barrier: Install fencing or approved barriers around the pool to prevent unsupervised access by children. Check local regulations for barrier requirements.
• Segurtasun elektrikoa: Keep all electrical cords, including the pump's, away from the pool area. Ensure the pump is connected to a Ground Fault Circuit Interrupter (GFCI) outlet.
• Manipulazio kimikoa: Store pool chemicals safely, out of reach of children and pets. Follow manufacturer instructions for chemical dosage and application.
• Larrialdietarako Prestakuntza: Keep emergency equipment, such as a life ring or rescue pole, readily accessible. Have a phone nearby to call for help in an emergency.
• Clear Pool Area: Ensure the area around the pool is clear of obstacles and tripping hazards.
• Pisu-gaitasuna: Do not exceed the recommended number of occupants or weight capacity for the pool.

3. Paketearen edukia

Verify that all components listed below are present and undamaged before beginning assembly. If any parts are missing or damaged, contact Intex customer service.

• Pool Liner with Clearview Leihoak
• Powder-Coated Steel Frame Components (Horizontal Beams, Vertical Legs, T-Joints)
• Krystal Clear Cartridge Filter Pump (1500 GPH)
• Beheko Oihala
• Igerilekuko estalkia
• Segurtasuneko eskailera
• Argibide eskuliburua
• Konponketa adabaki kit

3.1. irudia: Amaituview of the main components included in your pool set.

4. Konfigurazioa eta Muntaketa

Proper site preparation and careful assembly are crucial for the stability and longevity of your pool.

4.1 Gunearen prestaketa

1. Aukeratu maila-kokapena: Select a firm, level area in your yard. The ground must be completely flat to prevent uneven water distribution and stress on the pool structure.
2. Garbitu eremua: Remove all sharp objects, debris, rocks, and roots from the chosen site.
3. Install Ground Cloth: Spread the included ground cloth over the prepared area. This protects the bottom of the pool liner from punctures.

4.2 Markoen Muntaketa

1. Zabaldu forrua: Carefully unfold the pool liner onto the ground cloth, ensuring the clear windows are positioned as desired.
2. Habe horizontalak muntatu: Connect the horizontal beams using the composite T-Joints. Ensure all connections are secure.
3. Attach Vertical Legs: Insert the vertical support legs into the T-Joints and the corresponding slots on the pool liner.
4. Marko segurua: Ensure all frame components are fully engaged and locked into place. The powder-coated steel tubing provides enhanced support.
5. Smooth Liner: Once the frame is assembled, gently pull the liner outwards to remove any wrinkles from the bottom.

Image 4.1: A family engaged in the assembly process of the pool frame.

5. Zure igerilekua erabiltzea

5.1 Igerilekua betetzea

1. Hasierako betetzea: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner bottom.
2. Egiaztatu ihesak: Monitor for any leaks during the initial filling process. If leaks are detected, stop filling and address the issue.
3. Bete gomendatutako mailara arte: Fill the pool to the water line indicated on the liner or to approximately 6 inches (15 cm) below the top edge of the pool.

5.2 Iragazki-ponparen funtzionamendua

The included Krystal Clear Cartridge Filter Pump is essential for maintaining water clarity and hygiene.

1. Konektatu ponpa: Follow the separate pump instruction manual for connecting the hoses and electrical supply. Ensure all connections are tight.
2. Lehen ponpa: Before starting, ensure the pump is primed according to its specific instructions to remove air from the system.
3. Eguneroko funtzionamendua: Run the filter pump for a minimum of 4-6 hours daily to ensure adequate water circulation and filtration. The exact duration may vary based on usage and environmental conditions.
4. HydroAeration Technology: The pump incorporates HydroAeration Technology, which enhances water quality by improving circulation and increasing ioi negatiboak.

Image 5.1: The filter pump connected and operating, ensuring clean pool water.

6. Pool Maintenance

Regular maintenance is vital for safe and enjoyable pool use.

6.1 Uraren kalitatea

• Test Water Regularly: Use a pool test kit to check pH, chlorine, and alkalinity levels at least 2-3 times per week.
• Adjust Chemicals: Add appropriate pool chemicals as needed to maintain balanced water chemistry. Follow chemical manufacturer guidelines.
• Shock tratamendua: Periodically shock the pool water to eliminate bacteria and algae, especially after heavy use or rain.

6.2 Igerilekua garbitzea

• Skim Surface: Use a skimmer net daily to remove leaves, insects, and other debris from the water surface.
• Vacuum Pool: Vacuum the pool bottom regularly to remove settled debris.
• Clean Filter Cartridge: Rinse the filter cartridge with a garden hose every few days. Replace the cartridge every 2-4 weeks, depending on usage.
• Wipe Liner: Periodically wipe down the pool liner, including the clear windows, to prevent algae buildup.

6.3 Negurako prestaketa (denboralditik kanpo biltegiratzea)

1. Drain Pool: Completely drain the pool water using the drain plug.
2. Garbitu eta lehorra: Thoroughly clean the pool liner and frame components. Ensure all parts are completely dry to prevent mold and mildew.
3. Desmuntatu: Carefully disassemble the frame and liner.
4. Behar bezala gordetzea: Store the liner and frame components in a dry, protected area, away from extreme temperatures and pests.

7. Ohiko arazoak konpontzea

8. Produktuaren zehaztapenak

9. Bermea eta bezeroarentzako laguntza

Intex products are manufactured with high-quality materials and workmanship. All Intex products have been inspected and found free of defects prior to leaving the factory. Intex warrants this product against defects in materials and workmanship for a period of one (1) year from the date of retail purchase.

This warranty does not cover defects resulting from negligence, misuse, accident, improper operation, improper maintenance, or storage. It also does not cover damage due to acts of nature, such as storms, floods, or freezing temperatures.

For warranty claims, technical assistance, or to order replacement parts, please contact Intex Customer Service directly. Have your product model number (26769EH) and proof of purchase readily available.

Bisitatu Intex ofiziala website or refer to the contact information provided in your product packaging for the most current customer support details.